#include <spi.h>
#include <spi_flash.h>
#include <linux/log2.h>
+#include <dma.h>
#include "sf_internal.h"
return flash->bank_curr;
}
-static int spi_flash_read_bar(struct spi_flash *flash, u8 idcode0)
+static int spi_flash_read_bar(struct spi_flash *flash,
+ const struct spi_flash_info *info)
{
u8 curr_bank = 0;
int ret;
if (flash->size <= SPI_FLASH_16MB_BOUN)
goto bar_end;
- switch (idcode0) {
+ switch (JEDEC_MFR(info)) {
case SPI_FLASH_CFI_MFR_SPANSION:
flash->bank_read_cmd = CMD_BANKADDR_BRRD;
flash->bank_write_cmd = CMD_BANKADDR_BRWR;
static int spi_flash_cmd_wait_ready(struct spi_flash *flash,
unsigned long timeout)
{
- int timebase, ret;
+ unsigned long timebase;
+ int ret;
timebase = get_timer(0);
return ret;
}
+/*
+ * TODO: remove the weak after all the other spi_flash_copy_mmap
+ * implementations removed from drivers
+ */
void __weak spi_flash_copy_mmap(void *data, void *offset, size_t len)
{
+#ifdef CONFIG_DMA
+ if (!dma_memcpy(data, offset, len))
+ return;
+#endif
memcpy(data, offset, len);
}
#if defined(CONFIG_SPI_FLASH_STMICRO) || defined(CONFIG_SPI_FLASH_SST)
static void stm_get_locked_range(struct spi_flash *flash, u8 sr, loff_t *ofs,
- u32 *len)
+ u64 *len)
{
u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
int shift = ffs(mask) - 1;
/*
* Return 1 if the entire region is locked, 0 otherwise
*/
-static int stm_is_locked_sr(struct spi_flash *flash, u32 ofs, u32 len,
+static int stm_is_locked_sr(struct spi_flash *flash, loff_t ofs, u64 len,
u8 sr)
{
loff_t lock_offs;
- u32 lock_len;
+ u64 lock_len;
stm_get_locked_range(flash, sr, &lock_offs, &lock_len);
}
#endif
-static int set_quad_mode(struct spi_flash *flash, u8 idcode0)
+static const struct spi_flash_info *spi_flash_read_id(struct spi_flash *flash)
+{
+ int tmp;
+ u8 id[SPI_FLASH_MAX_ID_LEN];
+ const struct spi_flash_info *info;
+
+ tmp = spi_flash_cmd(flash->spi, CMD_READ_ID, id, SPI_FLASH_MAX_ID_LEN);
+ if (tmp < 0) {
+ printf("SF: error %d reading JEDEC ID\n", tmp);
+ return ERR_PTR(tmp);
+ }
+
+ info = spi_flash_ids;
+ for (; info->name != NULL; info++) {
+ if (info->id_len) {
+ if (!memcmp(info->id, id, info->id_len))
+ return info;
+ }
+ }
+
+ printf("SF: unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
+ id[0], id[1], id[2]);
+ return ERR_PTR(-ENODEV);
+}
+
+static int set_quad_mode(struct spi_flash *flash,
+ const struct spi_flash_info *info)
{
- switch (idcode0) {
+ switch (JEDEC_MFR(info)) {
#ifdef CONFIG_SPI_FLASH_MACRONIX
case SPI_FLASH_CFI_MFR_MACRONIX:
return macronix_quad_enable(flash);
return micron_quad_enable(flash);
#endif
default:
- printf("SF: Need set QEB func for %02x flash\n", idcode0);
+ printf("SF: Need set QEB func for %02x flash\n",
+ JEDEC_MFR(info));
return -1;
}
}
int spi_flash_scan(struct spi_flash *flash)
{
struct spi_slave *spi = flash->spi;
- const struct spi_flash_params *params;
- u16 jedec, ext_jedec;
- u8 cmd, idcode[5];
- int ret;
- static u8 spi_read_cmds_array[] = {
- CMD_READ_ARRAY_SLOW,
- CMD_READ_ARRAY_FAST,
- CMD_READ_DUAL_OUTPUT_FAST,
- CMD_READ_QUAD_OUTPUT_FAST,
- CMD_READ_DUAL_IO_FAST,
- CMD_READ_QUAD_IO_FAST };
-
- /* Read the ID codes */
- ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
- if (ret) {
- printf("SF: Failed to get idcodes\n");
- return -EINVAL;
- }
-
-#ifdef DEBUG
- printf("SF: Got idcodes\n");
- print_buffer(0, idcode, 1, sizeof(idcode), 0);
-#endif
-
- jedec = idcode[1] << 8 | idcode[2];
- ext_jedec = idcode[3] << 8 | idcode[4];
-
- /* Validate params from spi_flash_params table */
- params = spi_flash_params_table;
- for (; params->name != NULL; params++) {
- if ((params->jedec >> 16) == idcode[0]) {
- if ((params->jedec & 0xFFFF) == jedec) {
- if (params->ext_jedec == 0)
- break;
- else if (params->ext_jedec == ext_jedec)
- break;
- }
- }
- }
+ const struct spi_flash_info *info = NULL;
+ int ret = -1;
- if (!params->name) {
- printf("SF: Unsupported flash IDs: ");
- printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
- idcode[0], jedec, ext_jedec);
- return -EPROTONOSUPPORT;
- }
+ info = spi_flash_read_id(flash);
+ if (IS_ERR_OR_NULL(info))
+ return -ENOENT;
/* Flash powers up read-only, so clear BP# bits */
- if (idcode[0] == SPI_FLASH_CFI_MFR_ATMEL ||
- idcode[0] == SPI_FLASH_CFI_MFR_MACRONIX ||
- idcode[0] == SPI_FLASH_CFI_MFR_SST)
+ if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_ATMEL ||
+ JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_MACRONIX ||
+ JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_SST)
write_sr(flash, 0);
- /* Assign spi data */
- flash->name = params->name;
+ flash->name = info->name;
flash->memory_map = spi->memory_map;
flash->dual_flash = spi->option;
- /* Assign spi flash flags */
- if (params->flags & SST_WR)
+ if (info->flags & SST_WR)
flash->flags |= SNOR_F_SST_WR;
- /* Assign spi_flash ops */
#ifndef CONFIG_DM_SPI_FLASH
flash->write = spi_flash_cmd_write_ops;
#if defined(CONFIG_SPI_FLASH_SST)
flash->read = spi_flash_cmd_read_ops;
#endif
- /* lock hooks are flash specific - assign them based on idcode0 */
- switch (idcode[0]) {
#if defined(CONFIG_SPI_FLASH_STMICRO) || defined(CONFIG_SPI_FLASH_SST)
- case SPI_FLASH_CFI_MFR_STMICRO:
- case SPI_FLASH_CFI_MFR_SST:
+ /* NOR protection support for STmicro/Micron chips and similar */
+ if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_STMICRO ||
+ JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_SST) {
flash->flash_lock = stm_lock;
flash->flash_unlock = stm_unlock;
flash->flash_is_locked = stm_is_locked;
-#endif
- break;
- default:
- debug("SF: Lock ops not supported for %02x flash\n", idcode[0]);
}
+#endif
/* Compute the flash size */
flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
+ flash->page_size = info->page_size;
/*
* The Spansion S25FL032P and S25FL064P have 256b pages, yet use the
* 0x4d00 Extended JEDEC code. The rest of the Spansion flashes with
* the 0x4d00 Extended JEDEC code have 512b pages. All of the others
* have 256b pages.
*/
- if (ext_jedec == 0x4d00) {
- if ((jedec == 0x0215) || (jedec == 0x216))
- flash->page_size = 256;
- else
+ if (JEDEC_EXT(info) == 0x4d00) {
+ if ((JEDEC_ID(info) != 0x0215) &&
+ (JEDEC_ID(info) != 0x0216))
flash->page_size = 512;
- } else {
- flash->page_size = 256;
}
flash->page_size <<= flash->shift;
- flash->sector_size = params->sector_size << flash->shift;
- flash->size = flash->sector_size * params->nr_sectors << flash->shift;
+ flash->sector_size = info->sector_size << flash->shift;
+ flash->size = flash->sector_size * info->n_sectors << flash->shift;
#ifdef CONFIG_SF_DUAL_FLASH
if (flash->dual_flash & SF_DUAL_STACKED_FLASH)
flash->size <<= 1;
#endif
+#ifdef CONFIG_SPI_FLASH_USE_4K_SECTORS
/* Compute erase sector and command */
- if (params->flags & SECT_4K) {
+ if (info->flags & SECT_4K) {
flash->erase_cmd = CMD_ERASE_4K;
flash->erase_size = 4096 << flash->shift;
- } else if (params->flags & SECT_32K) {
- flash->erase_cmd = CMD_ERASE_32K;
- flash->erase_size = 32768 << flash->shift;
- } else {
+ } else
+#endif
+ {
flash->erase_cmd = CMD_ERASE_64K;
flash->erase_size = flash->sector_size;
}
/* Now erase size becomes valid sector size */
flash->sector_size = flash->erase_size;
- /* Look for the fastest read cmd */
- cmd = fls(params->e_rd_cmd & spi->mode_rx);
- if (cmd) {
- cmd = spi_read_cmds_array[cmd - 1];
- flash->read_cmd = cmd;
- } else {
- /* Go for default supported read cmd */
- flash->read_cmd = CMD_READ_ARRAY_FAST;
- }
-
- /* Not require to look for fastest only two write cmds yet */
- if (params->flags & WR_QPP && spi->mode & SPI_TX_QUAD)
+ /* Look for read commands */
+ flash->read_cmd = CMD_READ_ARRAY_FAST;
+ if (spi->mode & SPI_RX_SLOW)
+ flash->read_cmd = CMD_READ_ARRAY_SLOW;
+ else if (spi->mode & SPI_RX_QUAD && info->flags & RD_QUAD)
+ flash->read_cmd = CMD_READ_QUAD_OUTPUT_FAST;
+ else if (spi->mode & SPI_RX_DUAL && info->flags & RD_DUAL)
+ flash->read_cmd = CMD_READ_DUAL_OUTPUT_FAST;
+
+ /* Look for write commands */
+ if (info->flags & WR_QPP && spi->mode & SPI_TX_QUAD)
flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
else
/* Go for default supported write cmd */
if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
(flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
(flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
- ret = set_quad_mode(flash, idcode[0]);
+ ret = set_quad_mode(flash, info);
if (ret) {
- debug("SF: Fail to set QEB for %02x\n", idcode[0]);
+ debug("SF: Fail to set QEB for %02x\n",
+ JEDEC_MFR(info));
return -EINVAL;
}
}
}
#ifdef CONFIG_SPI_FLASH_STMICRO
- if (params->flags & E_FSR)
+ if (info->flags & E_FSR)
flash->flags |= SNOR_F_USE_FSR;
#endif
/* Configure the BAR - discover bank cmds and read current bank */
#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_read_bar(flash, idcode[0]);
+ ret = spi_flash_read_bar(flash, info);
if (ret < 0)
return ret;
#endif