static uint8_t cs_next;
static __maybe_unused struct nand_ecclayout omap_ecclayout;
+#if defined(CONFIG_NAND_OMAP_GPMC_WSCFG)
+static const int8_t wscfg[CONFIG_SYS_MAX_NAND_DEVICE] =
+ { CONFIG_NAND_OMAP_GPMC_WSCFG };
+#else
+/* wscfg is preset to zero since its a static variable */
+static const int8_t wscfg[CONFIG_SYS_MAX_NAND_DEVICE];
+#endif
+
/*
* Driver configurations
*/
struct omap_nand_info {
struct bch_control *control;
enum omap_ecc ecc_scheme;
- int cs;
+ uint8_t cs;
+ uint8_t ws; /* wait status pin (0,1) */
};
/* We are wasting a bit of memory but al least we are safe */
static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd,
uint32_t ctrl)
{
- register struct nand_chip *this = mtd->priv;
- struct omap_nand_info *info = this->priv;
+ register struct nand_chip *this = mtd_to_nand(mtd);
+ struct omap_nand_info *info = nand_get_controller_data(this);
int cs = info->cs;
/*
writeb(cmd, this->IO_ADDR_W);
}
-#ifdef CONFIG_SPL_BUILD
/* Check wait pin as dev ready indicator */
-static int omap_spl_dev_ready(struct mtd_info *mtd)
+static int omap_dev_ready(struct mtd_info *mtd)
{
- return gpmc_cfg->status & (1 << 8);
+ register struct nand_chip *this = mtd_to_nand(mtd);
+ struct omap_nand_info *info = nand_get_controller_data(this);
+ return gpmc_cfg->status & (1 << (8 + info->ws));
}
-#endif
-
/*
* gen_true_ecc - This function will generate true ECC value, which
/*
* omap_correct_data - Compares the ecc read from nand spare area with ECC
- * registers values and corrects one bit error if it has occured
+ * registers values and corrects one bit error if it has occurred
* Further details can be had from OMAP TRM and the following selected links:
* http://en.wikipedia.org/wiki/Hamming_code
* http://www.cs.utexas.edu/users/plaxton/c/337/05f/slides/ErrorCorrection-4.pdf
return 0;
printf("Error: Bad compare! failed\n");
/* detected 2 bit error */
- return -1;
+ return -EBADMSG;
}
}
return 0;
__maybe_unused
static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
{
- struct nand_chip *nand = mtd->priv;
- struct omap_nand_info *info = nand->priv;
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct omap_nand_info *info = nand_get_controller_data(nand);
unsigned int dev_width = (nand->options & NAND_BUSWIDTH_16) ? 1 : 0;
unsigned int ecc_algo = 0;
unsigned int bch_type = 0;
static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
uint8_t *ecc_code)
{
- struct nand_chip *chip = mtd->priv;
- struct omap_nand_info *info = chip->priv;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct omap_nand_info *info = nand_get_controller_data(chip);
uint32_t *ptr, val = 0;
int8_t i = 0, j;
return 0;
}
+#ifdef CONFIG_NAND_OMAP_GPMC_PREFETCH
+
+#define PREFETCH_CONFIG1_CS_SHIFT 24
+#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
+#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
+#define PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
+#define PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
+#define ENABLE_PREFETCH (1 << 7)
+
+/**
+ * omap_prefetch_enable - configures and starts prefetch transfer
+ * @fifo_th: fifo threshold to be used for read/ write
+ * @count: number of bytes to be transferred
+ * @is_write: prefetch read(0) or write post(1) mode
+ * @cs: chip select to use
+ */
+static int omap_prefetch_enable(int fifo_th, unsigned int count, int is_write, int cs)
+{
+ uint32_t val;
+
+ if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX)
+ return -EINVAL;
+
+ if (readl(&gpmc_cfg->prefetch_control))
+ return -EBUSY;
+
+ /* Set the amount of bytes to be prefetched */
+ writel(count, &gpmc_cfg->prefetch_config2);
+
+ val = (cs << PREFETCH_CONFIG1_CS_SHIFT) | (is_write & 1) |
+ PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH;
+ writel(val, &gpmc_cfg->prefetch_config1);
+
+ /* Start the prefetch engine */
+ writel(1, &gpmc_cfg->prefetch_control);
+
+ return 0;
+}
+
+/**
+ * omap_prefetch_reset - disables and stops the prefetch engine
+ */
+static void omap_prefetch_reset(void)
+{
+ writel(0, &gpmc_cfg->prefetch_control);
+ writel(0, &gpmc_cfg->prefetch_config1);
+}
+
+static int __read_prefetch_aligned(struct nand_chip *chip, uint32_t *buf, int len)
+{
+ int ret;
+ uint32_t cnt;
+ struct omap_nand_info *info = nand_get_controller_data(chip);
+
+ ret = omap_prefetch_enable(PREFETCH_FIFOTHRESHOLD_MAX, len, 0, info->cs);
+ if (ret < 0)
+ return ret;
+
+ do {
+ int i;
+
+ cnt = readl(&gpmc_cfg->prefetch_status);
+ cnt = PREFETCH_STATUS_FIFO_CNT(cnt);
+
+ for (i = 0; i < cnt / 4; i++) {
+ *buf++ = readl(CONFIG_SYS_NAND_BASE);
+ len -= 4;
+ }
+ } while (len);
+
+ omap_prefetch_reset();
+
+ return 0;
+}
+
+static inline void omap_nand_read(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (chip->options & NAND_BUSWIDTH_16)
+ nand_read_buf16(mtd, buf, len);
+ else
+ nand_read_buf(mtd, buf, len);
+}
+
+static void omap_nand_read_prefetch(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int ret;
+ uint32_t head, tail;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ /*
+ * If the destination buffer is unaligned, start with reading
+ * the overlap byte-wise.
+ */
+ head = ((uint32_t) buf) % 4;
+ if (head) {
+ omap_nand_read(mtd, buf, head);
+ buf += head;
+ len -= head;
+ }
+
+ /*
+ * Only transfer multiples of 4 bytes in a pre-fetched fashion.
+ * If there's a residue, care for it byte-wise afterwards.
+ */
+ tail = len % 4;
+
+ ret = __read_prefetch_aligned(chip, (uint32_t *)buf, len - tail);
+ if (ret < 0) {
+ /* fallback in case the prefetch engine is busy */
+ omap_nand_read(mtd, buf, len);
+ } else if (tail) {
+ buf += len - tail;
+ omap_nand_read(mtd, buf, tail);
+ }
+}
+#endif /* CONFIG_NAND_OMAP_GPMC_PREFETCH */
+
#ifdef CONFIG_NAND_OMAP_ELM
/*
* omap_reverse_list - re-orders list elements in reverse order [internal]
/*
* omap_correct_data_bch - Compares the ecc read from nand spare area
- * with ECC registers values and corrects one bit error if it has occured
+ * with ECC registers values and corrects one bit error if it has occurred
*
* @mtd: MTD device structure
* @dat: page data
static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
- struct nand_chip *chip = mtd->priv;
- struct omap_nand_info *info = chip->priv;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct omap_nand_info *info = nand_get_controller_data(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
uint32_t error_count = 0, error_max;
uint32_t error_loc[ELM_MAX_ERROR_COUNT];
enum bch_level bch_type;
uint32_t i, ecc_flag = 0;
- uint8_t count, err = 0;
+ uint8_t count;
uint32_t byte_pos, bit_pos;
+ int err = 0;
/* check calculated ecc */
for (i = 0; i < ecc->bytes && !ecc_flag; i++) {
bit_pos = error_loc[count] % 8;
if (byte_pos < SECTOR_BYTES) {
dat[byte_pos] ^= 1 << bit_pos;
- printf("nand: bit-flip corrected @data=%d\n", byte_pos);
+ debug("nand: bit-flip corrected @data=%d\n", byte_pos);
} else if (byte_pos < error_max) {
read_ecc[byte_pos - SECTOR_BYTES] ^= 1 << bit_pos;
- printf("nand: bit-flip corrected @oob=%d\n", byte_pos -
+ debug("nand: bit-flip corrected @oob=%d\n", byte_pos -
SECTOR_BYTES);
} else {
err = -EBADMSG;
int i, count;
/* cannot correct more than 8 errors */
unsigned int errloc[8];
- struct nand_chip *chip = mtd->priv;
- struct omap_nand_info *info = chip->priv;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct omap_nand_info *info = nand_get_controller_data(chip);
count = decode_bch(info->control, NULL, 512, read_ecc, calc_ecc,
NULL, errloc);
/* correct data only, not ecc bytes */
if (errloc[i] < 8*512)
data[errloc[i]/8] ^= 1 << (errloc[i] & 7);
- printf("corrected bitflip %u\n", errloc[i]);
+ debug("corrected bitflip %u\n", errloc[i]);
#ifdef DEBUG
puts("read_ecc: ");
/*
*/
static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
{
- struct nand_chip *chip = mtd->priv;
- struct omap_nand_info *info = chip->priv;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct omap_nand_info *info = nand_get_controller_data(chip);
if (info->control) {
free_bch(info->control);
*/
static int omap_select_ecc_scheme(struct nand_chip *nand,
enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) {
- struct omap_nand_info *info = nand->priv;
+ struct omap_nand_info *info = nand_get_controller_data(nand);
struct nand_ecclayout *ecclayout = &omap_ecclayout;
int eccsteps = pagesize / SECTOR_BYTES;
int i;
if (nand_curr_device < 0 ||
nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
- !nand_info[nand_curr_device].name) {
+ !nand_info[nand_curr_device]->name) {
printf("nand: error: no NAND devices found\n");
return -ENODEV;
}
- mtd = &nand_info[nand_curr_device];
- nand = mtd->priv;
+ mtd = nand_info[nand_curr_device];
+ nand = mtd_to_nand(mtd);
nand->options |= NAND_OWN_BUFFERS;
nand->options &= ~NAND_SUBPAGE_READ;
/* Setup the ecc configurations again */
return -EINVAL;
}
} else {
- err = omap_select_ecc_scheme(nand, OMAP_ECC_HAM1_CODE_SW,
+ if (eccstrength == 1) {
+ err = omap_select_ecc_scheme(nand,
+ OMAP_ECC_HAM1_CODE_SW,
+ mtd->writesize, mtd->oobsize);
+ } else if (eccstrength == 8) {
+ err = omap_select_ecc_scheme(nand,
+ OMAP_ECC_BCH8_CODE_HW_DETECTION_SW,
mtd->writesize, mtd->oobsize);
+ } else {
+ printf("nand: error: unsupported ECC scheme\n");
+ return -EINVAL;
+ }
}
/* Update NAND handling after ECC mode switch */
nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd;
omap_nand_info[cs].control = NULL;
omap_nand_info[cs].cs = cs;
- nand->priv = &omap_nand_info[cs];
+ omap_nand_info[cs].ws = wscfg[cs];
+ nand_set_controller_data(nand, &omap_nand_info[cs]);
nand->cmd_ctrl = omap_nand_hwcontrol;
nand->options |= NAND_NO_PADDING | NAND_CACHEPRG;
nand->chip_delay = 100;
if (err)
return err;
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_NAND_OMAP_GPMC_PREFETCH
+ nand->read_buf = omap_nand_read_prefetch;
+#else
if (nand->options & NAND_BUSWIDTH_16)
nand->read_buf = nand_read_buf16;
else
nand->read_buf = nand_read_buf;
- nand->dev_ready = omap_spl_dev_ready;
#endif
+
+ nand->dev_ready = omap_dev_ready;
+
return 0;
}
projects / oweals / u-boot.git / blobdiff