#include <linux/mtd/nand_ecc.h>
static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS;
-static nand_info_t mtd;
+static struct mtd_info *mtd;
static struct nand_chip nand_chip;
#define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \
static int nand_command(int block, int page, uint32_t offs,
u8 cmd)
{
- struct nand_chip *this = mtd.priv;
+ struct nand_chip *this = mtd_to_nand(mtd);
int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
- while (!this->dev_ready(&mtd))
+ while (!this->dev_ready(mtd))
;
/* Begin command latch cycle */
- this->cmd_ctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
/* Set ALE and clear CLE to start address cycle */
/* Column address */
- this->cmd_ctrl(&mtd, offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
- this->cmd_ctrl(&mtd, page_addr & 0xff, NAND_CTRL_ALE); /* A[16:9] */
- this->cmd_ctrl(&mtd, (page_addr >> 8) & 0xff,
+ this->cmd_ctrl(mtd, offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+ this->cmd_ctrl(mtd, page_addr & 0xff, NAND_CTRL_ALE); /* A[16:9] */
+ this->cmd_ctrl(mtd, (page_addr >> 8) & 0xff,
NAND_CTRL_ALE); /* A[24:17] */
#ifdef CONFIG_SYS_NAND_4_ADDR_CYCLE
/* One more address cycle for devices > 32MiB */
- this->cmd_ctrl(&mtd, (page_addr >> 16) & 0x0f,
+ this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f,
NAND_CTRL_ALE); /* A[28:25] */
#endif
/* Latch in address */
- this->cmd_ctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+ this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
* Wait a while for the data to be ready
*/
- while (!this->dev_ready(&mtd))
+ while (!this->dev_ready(mtd))
;
return 0;
static int nand_command(int block, int page, uint32_t offs,
u8 cmd)
{
- struct nand_chip *this = mtd.priv;
+ struct nand_chip *this = mtd_to_nand(mtd);
int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
void (*hwctrl)(struct mtd_info *mtd, int cmd,
unsigned int ctrl) = this->cmd_ctrl;
- while (!this->dev_ready(&mtd))
+ while (!this->dev_ready(mtd))
;
/* Emulate NAND_CMD_READOOB */
}
/* Shift the offset from byte addressing to word addressing. */
- if (this->options & NAND_BUSWIDTH_16)
+ if ((this->options & NAND_BUSWIDTH_16) && !nand_opcode_8bits(cmd))
offs >>= 1;
/* Begin command latch cycle */
- hwctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ hwctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
/* Set ALE and clear CLE to start address cycle */
/* Column address */
- hwctrl(&mtd, offs & 0xff,
- NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */
- hwctrl(&mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
+ hwctrl(mtd, offs & 0xff,
+ NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */
+ hwctrl(mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
/* Row address */
- hwctrl(&mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
- hwctrl(&mtd, ((page_addr >> 8) & 0xff),
- NAND_CTRL_ALE); /* A[27:20] */
+ hwctrl(mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
+ hwctrl(mtd, ((page_addr >> 8) & 0xff),
+ NAND_CTRL_ALE); /* A[27:20] */
#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
/* One more address cycle for devices > 128MiB */
- hwctrl(&mtd, (page_addr >> 16) & 0x0f,
+ hwctrl(mtd, (page_addr >> 16) & 0x0f,
NAND_CTRL_ALE); /* A[31:28] */
#endif
/* Latch in address */
- hwctrl(&mtd, NAND_CMD_READSTART,
- NAND_CTRL_CLE | NAND_CTRL_CHANGE);
- hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+ hwctrl(mtd, NAND_CMD_READSTART,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ hwctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
* Wait a while for the data to be ready
*/
- while (!this->dev_ready(&mtd))
+ while (!this->dev_ready(mtd))
;
return 0;
static int nand_is_bad_block(int block)
{
- struct nand_chip *this = mtd.priv;
+ struct nand_chip *this = mtd_to_nand(mtd);
+ u_char bb_data[2];
nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS,
NAND_CMD_READOOB);
* Read one byte (or two if it's a 16 bit chip).
*/
if (this->options & NAND_BUSWIDTH_16) {
- if (readw(this->IO_ADDR_R) != 0xffff)
+ this->read_buf(mtd, bb_data, 2);
+ if (bb_data[0] != 0xff || bb_data[1] != 0xff)
return 1;
} else {
- if (readb(this->IO_ADDR_R) != 0xff)
+ this->read_buf(mtd, bb_data, 1);
+ if (bb_data[0] != 0xff)
return 1;
}
#if defined(CONFIG_SYS_NAND_HW_ECC_OOBFIRST)
static int nand_read_page(int block, int page, uchar *dst)
{
- struct nand_chip *this = mtd.priv;
+ struct nand_chip *this = mtd_to_nand(mtd);
u_char ecc_calc[ECCTOTAL];
u_char ecc_code[ECCTOTAL];
u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
uint8_t *p = dst;
nand_command(block, page, 0, NAND_CMD_READOOB);
- this->read_buf(&mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
+ this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
nand_command(block, page, 0, NAND_CMD_READ0);
/* Pick the ECC bytes out of the oob data */
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- this->ecc.hwctl(&mtd, NAND_ECC_READ);
- this->read_buf(&mtd, p, eccsize);
- this->ecc.calculate(&mtd, p, &ecc_calc[i]);
- this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]);
+ this->ecc.hwctl(mtd, NAND_ECC_READ);
+ this->read_buf(mtd, p, eccsize);
+ this->ecc.calculate(mtd, p, &ecc_calc[i]);
+ this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
}
return 0;
#else
static int nand_read_page(int block, int page, void *dst)
{
- struct nand_chip *this = mtd.priv;
+ struct nand_chip *this = mtd_to_nand(mtd);
u_char ecc_calc[ECCTOTAL];
u_char ecc_code[ECCTOTAL];
u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
if (this->ecc.mode != NAND_ECC_SOFT)
- this->ecc.hwctl(&mtd, NAND_ECC_READ);
- this->read_buf(&mtd, p, eccsize);
- this->ecc.calculate(&mtd, p, &ecc_calc[i]);
+ this->ecc.hwctl(mtd, NAND_ECC_READ);
+ this->read_buf(mtd, p, eccsize);
+ this->ecc.calculate(mtd, p, &ecc_calc[i]);
}
- this->read_buf(&mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
+ this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
/* Pick the ECC bytes out of the oob data */
for (i = 0; i < ECCTOTAL; i++)
* from correct_data(). We just hope that all possible errors
* are corrected by this routine.
*/
- this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]);
+ this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
}
return 0;
}
#endif
-int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst)
-{
- unsigned int block, lastblock;
- unsigned int page;
-
- /*
- * offs has to be aligned to a page address!
- */
- block = offs / CONFIG_SYS_NAND_BLOCK_SIZE;
- lastblock = (offs + size - 1) / CONFIG_SYS_NAND_BLOCK_SIZE;
- page = (offs % CONFIG_SYS_NAND_BLOCK_SIZE) / CONFIG_SYS_NAND_PAGE_SIZE;
-
- while (block <= lastblock) {
- if (!nand_is_bad_block(block)) {
- /*
- * Skip bad blocks
- */
- while (page < CONFIG_SYS_NAND_PAGE_COUNT) {
- nand_read_page(block, page, dst);
- dst += CONFIG_SYS_NAND_PAGE_SIZE;
- page++;
- }
-
- page = 0;
- } else {
- lastblock++;
- }
-
- block++;
- }
-
- return 0;
-}
-
/* nand_init() - initialize data to make nand usable by SPL */
void nand_init(void)
{
/*
* Init board specific nand support
*/
- mtd.priv = &nand_chip;
+ mtd = nand_to_mtd(&nand_chip);
nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
(void __iomem *)CONFIG_SYS_NAND_BASE;
board_nand_init(&nand_chip);
#endif
if (nand_chip.select_chip)
- nand_chip.select_chip(&mtd, 0);
+ nand_chip.select_chip(mtd, 0);
}
/* Unselect after operation */
void nand_deselect(void)
{
if (nand_chip.select_chip)
- nand_chip.select_chip(&mtd, -1);
+ nand_chip.select_chip(mtd, -1);
}
+
+#include "nand_spl_loaders.c"