* (C) Copyright 2012
* Amit Virdi, ST Microelectronics, amit.virdi@st.com.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
static void fsmc_nand_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl)
{
- struct nand_chip *this = mtd->priv;
+ struct nand_chip *this = mtd_to_nand(mtd);
ulong IO_ADDR_W;
if (ctrl & NAND_CTRL_CHANGE) {
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @oob_required: caller expects OOB data read to chip->oob_poi
* @page: page number to read
*
* This routine is needed for fsmc verison 8 as reading from NAND chip has to be
* max of 8 bits)
*/
static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required, int page)
{
struct fsmc_eccplace *fsmc_eccpl;
int i, j, s, stat, eccsize = chip->ecc.size;
return 0;
}
+#ifndef CONFIG_SPL_BUILD
+/*
+ * fsmc_nand_switch_ecc - switch the ECC operation between different engines
+ *
+ * @eccstrength - the number of bits that could be corrected
+ * (1 - HW, 4 - SW BCH4)
+ */
+int fsmc_nand_switch_ecc(uint32_t eccstrength)
+{
+ struct nand_chip *nand;
+ struct mtd_info *mtd;
+ int err;
+
+ /*
+ * This functions is only called on SPEAr600 platforms, supporting
+ * 1 bit HW ECC. The BCH8 HW ECC (FSMC_VER8) from the ST-Ericsson
+ * Nomadik SoC is currently supporting this fsmc_nand_switch_ecc()
+ * function, as it doesn't need to switch to a different ECC layout.
+ */
+ mtd = get_nand_dev_by_index(nand_curr_device);
+ nand = mtd_to_nand(mtd);
+
+ /* Setup the ecc configurations again */
+ if (eccstrength == 1) {
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.bytes = 3;
+ nand->ecc.strength = 1;
+ nand->ecc.layout = &fsmc_ecc1_layout;
+ nand->ecc.calculate = fsmc_read_hwecc;
+ nand->ecc.correct = nand_correct_data;
+ } else if (eccstrength == 4) {
+ /*
+ * .calculate .correct and .bytes will be set in
+ * nand_scan_tail()
+ */
+ nand->ecc.mode = NAND_ECC_SOFT_BCH;
+ nand->ecc.strength = 4;
+ nand->ecc.layout = NULL;
+ } else {
+ printf("Error: ECC strength %d not supported!\n", eccstrength);
+ }
+
+ /* Update NAND handling after ECC mode switch */
+ err = nand_scan_tail(mtd);
+
+ return err;
+}
+#endif /* CONFIG_SPL_BUILD */
+
int fsmc_nand_init(struct nand_chip *nand)
{
static int chip_nr;
struct mtd_info *mtd;
- int i;
u32 peripid2 = readl(&fsmc_regs_p->peripid2);
fsmc_version = (peripid2 >> FSMC_REVISION_SHFT) &
(void __iomem *)CONFIG_SYS_NAND_BASE;
nand->badblockbits = 7;
- mtd = &nand_info[chip_nr++];
- mtd->priv = nand;
+ mtd = nand_to_mtd(nand);
switch (fsmc_version) {
case FSMC_VER8:
nand->ecc.bytes = 13;
+ nand->ecc.strength = 8;
nand->ecc.correct = fsmc_bch8_correct_data;
nand->ecc.read_page = fsmc_read_page_hwecc;
if (mtd->writesize == 512)
break;
default:
nand->ecc.bytes = 3;
+ nand->ecc.strength = 1;
nand->ecc.layout = &fsmc_ecc1_layout;
nand->ecc.correct = nand_correct_data;
break;
if (nand_scan_tail(mtd))
return -ENXIO;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- if (nand_register(i))
- return -ENXIO;
+ if (nand_register(chip_nr++, mtd))
+ return -ENXIO;
return 0;
}