*/
#include <common.h>
+#include <errno.h>
#include <malloc.h>
#include <mmc.h>
#include <sdhci.h>
#define CONFIG_SDHCI_CMD_MAX_TIMEOUT 3200
#endif
#define CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT 100
+#define SDHCI_READ_STATUS_TIMEOUT 1000
+#ifdef CONFIG_DM_MMC_OPS
+static int sdhci_send_command(struct udevice *dev, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ struct mmc *mmc = mmc_get_mmc_dev(dev);
+
+#else
static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
- struct mmc_data *data)
+ struct mmc_data *data)
{
+#endif
struct sdhci_host *host = mmc->priv;
unsigned int stat = 0;
int ret = 0;
if (stat & SDHCI_INT_ERROR)
break;
} while (((stat & mask) != mask) &&
- (get_timer(start) < CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT));
+ (get_timer(start) < SDHCI_READ_STATUS_TIMEOUT));
- if (get_timer(start) >= CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT) {
+ if (get_timer(start) >= SDHCI_READ_STATUS_TIMEOUT) {
if (host->quirks & SDHCI_QUIRK_BROKEN_R1B)
return 0;
else {
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
}
+#ifdef CONFIG_DM_MMC_OPS
+static int sdhci_set_ios(struct udevice *dev)
+{
+ struct mmc *mmc = mmc_get_mmc_dev(dev);
+#else
static void sdhci_set_ios(struct mmc *mmc)
{
+#endif
u32 ctrl;
struct sdhci_host *host = mmc->priv;
ctrl &= ~SDHCI_CTRL_HISPD;
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+#ifdef CONFIG_DM_MMC_OPS
+ return 0;
+#endif
}
static int sdhci_init(struct mmc *mmc)
return 0;
}
+#ifdef CONFIG_DM_MMC_OPS
+int sdhci_probe(struct udevice *dev)
+{
+ struct mmc *mmc = mmc_get_mmc_dev(dev);
+
+ return sdhci_init(mmc);
+}
+const struct dm_mmc_ops sdhci_ops = {
+ .send_cmd = sdhci_send_command,
+ .set_ios = sdhci_set_ios,
+};
+#else
static const struct mmc_ops sdhci_ops = {
.send_cmd = sdhci_send_command,
.set_ios = sdhci_set_ios,
.init = sdhci_init,
};
+#endif
-int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
+int sdhci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth,
+ uint caps, u32 max_clk, u32 min_clk, uint version,
+ uint quirks, uint host_caps)
{
- unsigned int caps;
-
- host->cfg.name = host->name;
- host->cfg.ops = &sdhci_ops;
-
- caps = sdhci_readl(host, SDHCI_CAPABILITIES);
-#ifdef CONFIG_MMC_SDMA
- if (!(caps & SDHCI_CAN_DO_SDMA)) {
- printf("%s: Your controller doesn't support SDMA!!\n",
- __func__);
- return -1;
- }
+ cfg->name = name;
+#ifndef CONFIG_DM_MMC_OPS
+ cfg->ops = &sdhci_ops;
#endif
-
if (max_clk)
- host->cfg.f_max = max_clk;
+ cfg->f_max = max_clk;
else {
- if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
- host->cfg.f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK)
- >> SDHCI_CLOCK_BASE_SHIFT;
+ if (version >= SDHCI_SPEC_300)
+ cfg->f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK) >>
+ SDHCI_CLOCK_BASE_SHIFT;
else
- host->cfg.f_max = (caps & SDHCI_CLOCK_BASE_MASK)
- >> SDHCI_CLOCK_BASE_SHIFT;
- host->cfg.f_max *= 1000000;
- }
- if (host->cfg.f_max == 0) {
- printf("%s: Hardware doesn't specify base clock frequency\n",
- __func__);
- return -1;
+ cfg->f_max = (caps & SDHCI_CLOCK_BASE_MASK) >>
+ SDHCI_CLOCK_BASE_SHIFT;
+ cfg->f_max *= 1000000;
}
+ if (cfg->f_max == 0)
+ return -EINVAL;
if (min_clk)
- host->cfg.f_min = min_clk;
+ cfg->f_min = min_clk;
else {
- if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
- host->cfg.f_min = host->cfg.f_max /
- SDHCI_MAX_DIV_SPEC_300;
+ if (version >= SDHCI_SPEC_300)
+ cfg->f_min = cfg->f_max / SDHCI_MAX_DIV_SPEC_300;
else
- host->cfg.f_min = host->cfg.f_max /
- SDHCI_MAX_DIV_SPEC_200;
+ cfg->f_min = cfg->f_max / SDHCI_MAX_DIV_SPEC_200;
}
-
- host->cfg.voltages = 0;
+ cfg->voltages = 0;
if (caps & SDHCI_CAN_VDD_330)
- host->cfg.voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
+ cfg->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
if (caps & SDHCI_CAN_VDD_300)
- host->cfg.voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
+ cfg->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
if (caps & SDHCI_CAN_VDD_180)
- host->cfg.voltages |= MMC_VDD_165_195;
+ cfg->voltages |= MMC_VDD_165_195;
- if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
- host->cfg.voltages |= host->voltages;
-
- host->cfg.host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
- if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
+ cfg->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
+ if (version >= SDHCI_SPEC_300) {
if (caps & SDHCI_CAN_DO_8BIT)
- host->cfg.host_caps |= MMC_MODE_8BIT;
+ cfg->host_caps |= MMC_MODE_8BIT;
}
- if (host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)
- host->cfg.host_caps &= ~(MMC_MODE_HS | MMC_MODE_HS_52MHz);
+ if (quirks & SDHCI_QUIRK_NO_HISPD_BIT)
+ cfg->host_caps &= ~(MMC_MODE_HS | MMC_MODE_HS_52MHz);
- if (host->host_caps)
- host->cfg.host_caps |= host->host_caps;
+ if (host_caps)
+ cfg->host_caps |= host_caps;
- host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+
+ cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+
+ return 0;
+}
+
+#ifdef CONFIG_BLK
+int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg)
+{
+ return mmc_bind(dev, mmc, cfg);
+}
+#else
+int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
+{
+ unsigned int caps;
+
+ caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+#ifdef CONFIG_MMC_SDMA
+ if (!(caps & SDHCI_CAN_DO_SDMA)) {
+ printf("%s: Your controller doesn't support SDMA!!\n",
+ __func__);
+ return -1;
+ }
+#endif
+
+ if (sdhci_setup_cfg(&host->cfg, host->name, host->bus_width, caps,
+ max_clk, min_clk, SDHCI_GET_VERSION(host),
+ host->quirks, host->host_caps)) {
+ printf("%s: Hardware doesn't specify base clock frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
+ host->cfg.voltages |= host->voltages;
sdhci_reset(host, SDHCI_RESET_ALL);
return 0;
}
+#endif
projects / oweals / u-boot.git / blobdiff