static struct list_head mmc_devices;
static int cur_dev_num = -1;
-int __board_mmc_getcd(u8 *cd, struct mmc *mmc) {
+int __board_mmc_getcd(struct mmc *mmc) {
return -1;
}
-int board_mmc_getcd(u8 *cd, struct mmc *mmc)__attribute__((weak,
+int board_mmc_getcd(struct mmc *mmc)__attribute__((weak,
alias("__board_mmc_getcd")));
+#ifdef CONFIG_MMC_BOUNCE_BUFFER
+static int mmc_bounce_need_bounce(struct mmc_data *orig)
+{
+ ulong addr, len;
+
+ if (orig->flags & MMC_DATA_READ)
+ addr = (ulong)orig->dest;
+ else
+ addr = (ulong)orig->src;
+
+ if (addr % ARCH_DMA_MINALIGN) {
+ debug("MMC: Unaligned data destination address %08lx!\n", addr);
+ return 1;
+ }
+
+ len = (ulong)(orig->blocksize * orig->blocks);
+ if (len % ARCH_DMA_MINALIGN) {
+ debug("MMC: Unaligned data destination length %08lx!\n", len);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int mmc_bounce_buffer_start(struct mmc_data *backup,
+ struct mmc_data *orig)
+{
+ ulong origlen, len;
+ void *buffer;
+
+ if (!orig)
+ return 0;
+
+ if (!mmc_bounce_need_bounce(orig))
+ return 0;
+
+ memcpy(backup, orig, sizeof(struct mmc_data));
+
+ origlen = orig->blocksize * orig->blocks;
+ len = roundup(origlen, ARCH_DMA_MINALIGN);
+ buffer = memalign(ARCH_DMA_MINALIGN, len);
+ if (!buffer) {
+ puts("MMC: Error allocating MMC bounce buffer!\n");
+ return 1;
+ }
+
+ if (orig->flags & MMC_DATA_READ) {
+ orig->dest = buffer;
+ } else {
+ memcpy(buffer, orig->src, origlen);
+ orig->src = buffer;
+ }
+
+ return 0;
+}
+
+static void mmc_bounce_buffer_stop(struct mmc_data *backup,
+ struct mmc_data *orig)
+{
+ ulong len;
+
+ if (!orig)
+ return;
+
+ if (!mmc_bounce_need_bounce(backup))
+ return;
+
+ if (backup->flags & MMC_DATA_READ) {
+ len = backup->blocksize * backup->blocks;
+ memcpy(backup->dest, orig->dest, len);
+ free(orig->dest);
+ orig->dest = backup->dest;
+ } else {
+ free((void *)orig->src);
+ orig->src = backup->src;
+ }
+
+ return;
+
+}
+#else
+static inline int mmc_bounce_buffer_start(struct mmc_data *backup,
+ struct mmc_data *orig) { return 0; }
+static inline void mmc_bounce_buffer_stop(struct mmc_data *backup,
+ struct mmc_data *orig) { }
+#endif
+
int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
{
-#ifdef CONFIG_MMC_TRACE
+ struct mmc_data backup;
int ret;
+
+ memset(&backup, 0, sizeof(backup));
+
+ ret = mmc_bounce_buffer_start(&backup, data);
+ if (ret)
+ return ret;
+
+#ifdef CONFIG_MMC_TRACE
int i;
u8 *ptr;
for (i = 0; i < 4; i++) {
int j;
printf("\t\t\t\t\t%03d - ", i*4);
- ptr = &cmd->response[i];
+ ptr = (u8 *)&cmd->response[i];
ptr += 3;
for (j = 0; j < 4; j++)
printf("%02X ", *ptr--);
printf("\t\tERROR MMC rsp not supported\n");
break;
}
- return ret;
#else
- return mmc->send_cmd(mmc, cmd, data);
+ ret = mmc->send_cmd(mmc, cmd, data);
#endif
+ mmc_bounce_buffer_stop(&backup, data);
+ return ret;
}
int mmc_send_status(struct mmc *mmc, int timeout)
{
struct mmc_cmd cmd;
- int err;
+ int err, retries = 5;
#ifdef CONFIG_MMC_TRACE
int status;
#endif
do {
err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err)
+ if (!err) {
+ if ((cmd.response[0] & MMC_STATUS_RDY_FOR_DATA) &&
+ (cmd.response[0] & MMC_STATUS_CURR_STATE) !=
+ MMC_STATE_PRG)
+ break;
+ else if (cmd.response[0] & MMC_STATUS_MASK) {
+ printf("Status Error: 0x%08X\n",
+ cmd.response[0]);
+ return COMM_ERR;
+ }
+ } else if (--retries < 0)
return err;
- else if (cmd.response[0] & MMC_STATUS_RDY_FOR_DATA)
- break;
udelay(1000);
- if (cmd.response[0] & MMC_STATUS_MASK) {
- printf("Status Error: 0x%08X\n", cmd.response[0]);
- return COMM_ERR;
- }
} while (timeout--);
#ifdef CONFIG_MMC_TRACE
int err = 0;
struct mmc *mmc = find_mmc_device(dev_num);
lbaint_t blk = 0, blk_r = 0;
+ int timeout = 1000;
if (!mmc)
return -1;
break;
blk += blk_r;
+
+ /* Waiting for the ready status */
+ if (mmc_send_status(mmc, timeout))
+ return 0;
}
return blk;
printf("mmc fail to send stop cmd\n");
return 0;
}
-
- /* Waiting for the ready status */
- mmc_send_status(mmc, timeout);
}
+ /* Waiting for the ready status */
+ if (mmc_send_status(mmc, timeout))
+ return 0;
+
return blkcnt;
}
{
struct mmc_cmd cmd;
struct mmc_data data;
- int timeout = 1000;
if (blkcnt > 1)
cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK;
printf("mmc fail to send stop cmd\n");
return 0;
}
-
- /* Waiting for the ready status */
- mmc_send_status(mmc, timeout);
}
return blkcnt;
ret = mmc_send_cmd(mmc, &cmd, NULL);
/* Waiting for the ready status */
- mmc_send_status(mmc, timeout);
+ if (!ret)
+ ret = mmc_send_status(mmc, timeout);
return ret;
| (part_num & PART_ACCESS_MASK));
}
+int mmc_getcd(struct mmc *mmc)
+{
+ int cd;
+
+ cd = board_mmc_getcd(mmc);
+
+ if ((cd < 0) && mmc->getcd)
+ cd = mmc->getcd(mmc);
+
+ return cd;
+}
+
int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp)
{
struct mmc_cmd cmd;
if (!(__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED))
return 0;
+ /*
+ * If the host doesn't support SD_HIGHSPEED, do not switch card to
+ * HIGHSPEED mode even if the card support SD_HIGHSPPED.
+ * This can avoid furthur problem when the card runs in different
+ * mode between the host.
+ */
+ if (!((mmc->host_caps & MMC_MODE_HS_52MHz) &&
+ (mmc->host_caps & MMC_MODE_HS)))
+ return 0;
+
err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, 1, (u8 *)switch_status);
if (err)
/* Select the card, and put it into Transfer Mode */
if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
cmd.cmdidx = MMC_CMD_SELECT_CARD;
- cmd.resp_type = MMC_RSP_R1b;
+ cmd.resp_type = MMC_RSP_R1;
cmd.cmdarg = mmc->rca << 16;
cmd.flags = 0;
err = mmc_send_cmd(mmc, &cmd, NULL);
}
if (mmc->card_caps & MMC_MODE_HS)
- mmc_set_clock(mmc, 50000000);
+ mmc->tran_speed = 50000000;
else
- mmc_set_clock(mmc, 25000000);
+ mmc->tran_speed = 25000000;
} else {
- for (width = EXT_CSD_BUS_WIDTH_8; width >= 0; width--) {
+ width = ((mmc->host_caps & MMC_MODE_MASK_WIDTH_BITS) >>
+ MMC_MODE_WIDTH_BITS_SHIFT);
+ for (; width >= 0; width--) {
/* Set the card to use 4 bit*/
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH, width);
if (mmc->card_caps & MMC_MODE_HS) {
if (mmc->card_caps & MMC_MODE_HS_52MHz)
- mmc_set_clock(mmc, 52000000);
+ mmc->tran_speed = 52000000;
else
- mmc_set_clock(mmc, 26000000);
- } else
- mmc_set_clock(mmc, 20000000);
+ mmc->tran_speed = 26000000;
+ }
}
+ mmc_set_clock(mmc, mmc->tran_speed);
+
/* fill in device description */
mmc->block_dev.lun = 0;
mmc->block_dev.type = 0;
block_dev_desc_t *mmc_get_dev(int dev)
{
struct mmc *mmc = find_mmc_device(dev);
+ if (!mmc)
+ return NULL;
- return mmc ? &mmc->block_dev : NULL;
+ mmc_init(mmc);
+ return &mmc->block_dev;
}
#endif
int mmc_init(struct mmc *mmc)
{
- int err, retry = 3;
+ int err;
+
+ if (mmc_getcd(mmc) == 0) {
+ mmc->has_init = 0;
+ printf("MMC: no card present\n");
+ return NO_CARD_ERR;
+ }
if (mmc->has_init)
return 0;
mmc->part_num = 0;
/* Test for SD version 2 */
- /*
- * retry here for 3 times, as for some controller it has dynamic
- * clock gating, and only toggle out clk when the first cmd0 send
- * out, while some card strictly obey the 74 clocks rule, the interval
- * may not be sufficient between the cmd0 and this cmd8, retry to
- * fulfil the clock requirement
- */
- do {
- err = mmc_send_if_cond(mmc);
- } while (--retry > 0 && err);
-
- if (err)
- return err;
+ err = mmc_send_if_cond(mmc);
/* Now try to get the SD card's operating condition */
err = sd_send_op_cond(mmc);