#include <part.h>
#include <malloc.h>
#include <linux/list.h>
-#include <mmc.h>
#include <div64.h>
+/* Set block count limit because of 16 bit register limit on some hardware*/
+#ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
+#define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535
+#endif
+
static struct list_head mmc_devices;
static int cur_dev_num = -1;
-int __board_mmc_getcd(u8 *cd, struct mmc *mmc) {
+int __board_mmc_getcd(struct mmc *mmc) {
return -1;
}
-int board_mmc_getcd(u8 *cd, struct mmc *mmc)__attribute__((weak,
+int board_mmc_getcd(struct mmc *mmc)__attribute__((weak,
alias("__board_mmc_getcd")));
+#ifdef CONFIG_MMC_BOUNCE_BUFFER
+static int mmc_bounce_need_bounce(struct mmc_data *orig)
+{
+ ulong addr, len;
+
+ if (orig->flags & MMC_DATA_READ)
+ addr = (ulong)orig->dest;
+ else
+ addr = (ulong)orig->src;
+
+ if (addr % ARCH_DMA_MINALIGN) {
+ debug("MMC: Unaligned data destination address %08lx!\n", addr);
+ return 1;
+ }
+
+ len = (ulong)(orig->blocksize * orig->blocks);
+ if (len % ARCH_DMA_MINALIGN) {
+ debug("MMC: Unaligned data destination length %08lx!\n", len);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int mmc_bounce_buffer_start(struct mmc_data *backup,
+ struct mmc_data *orig)
+{
+ ulong origlen, len;
+ void *buffer;
+
+ if (!orig)
+ return 0;
+
+ if (!mmc_bounce_need_bounce(orig))
+ return 0;
+
+ memcpy(backup, orig, sizeof(struct mmc_data));
+
+ origlen = orig->blocksize * orig->blocks;
+ len = roundup(origlen, ARCH_DMA_MINALIGN);
+ buffer = memalign(ARCH_DMA_MINALIGN, len);
+ if (!buffer) {
+ puts("MMC: Error allocating MMC bounce buffer!\n");
+ return 1;
+ }
+
+ if (orig->flags & MMC_DATA_READ) {
+ orig->dest = buffer;
+ } else {
+ memcpy(buffer, orig->src, origlen);
+ orig->src = buffer;
+ }
+
+ return 0;
+}
+
+static void mmc_bounce_buffer_stop(struct mmc_data *backup,
+ struct mmc_data *orig)
+{
+ ulong len;
+
+ if (!orig)
+ return;
+
+ if (!mmc_bounce_need_bounce(backup))
+ return;
+
+ if (backup->flags & MMC_DATA_READ) {
+ len = backup->blocksize * backup->blocks;
+ memcpy(backup->dest, orig->dest, len);
+ free(orig->dest);
+ orig->dest = backup->dest;
+ } else {
+ free((void *)orig->src);
+ orig->src = backup->src;
+ }
+
+ return;
+
+}
+#else
+static inline int mmc_bounce_buffer_start(struct mmc_data *backup,
+ struct mmc_data *orig) { return 0; }
+static inline void mmc_bounce_buffer_stop(struct mmc_data *backup,
+ struct mmc_data *orig) { }
+#endif
+
int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
{
- return mmc->send_cmd(mmc, cmd, data);
+ struct mmc_data backup;
+ int ret;
+
+ memset(&backup, 0, sizeof(backup));
+
+ ret = mmc_bounce_buffer_start(&backup, data);
+ if (ret)
+ return ret;
+
+#ifdef CONFIG_MMC_TRACE
+ int i;
+ u8 *ptr;
+
+ printf("CMD_SEND:%d\n", cmd->cmdidx);
+ printf("\t\tARG\t\t\t 0x%08X\n", cmd->cmdarg);
+ printf("\t\tFLAG\t\t\t %d\n", cmd->flags);
+ ret = mmc->send_cmd(mmc, cmd, data);
+ switch (cmd->resp_type) {
+ case MMC_RSP_NONE:
+ printf("\t\tMMC_RSP_NONE\n");
+ break;
+ case MMC_RSP_R1:
+ printf("\t\tMMC_RSP_R1,5,6,7 \t 0x%08X \n",
+ cmd->response[0]);
+ break;
+ case MMC_RSP_R1b:
+ printf("\t\tMMC_RSP_R1b\t\t 0x%08X \n",
+ cmd->response[0]);
+ break;
+ case MMC_RSP_R2:
+ printf("\t\tMMC_RSP_R2\t\t 0x%08X \n",
+ cmd->response[0]);
+ printf("\t\t \t\t 0x%08X \n",
+ cmd->response[1]);
+ printf("\t\t \t\t 0x%08X \n",
+ cmd->response[2]);
+ printf("\t\t \t\t 0x%08X \n",
+ cmd->response[3]);
+ printf("\n");
+ printf("\t\t\t\t\tDUMPING DATA\n");
+ for (i = 0; i < 4; i++) {
+ int j;
+ printf("\t\t\t\t\t%03d - ", i*4);
+ ptr = (u8 *)&cmd->response[i];
+ ptr += 3;
+ for (j = 0; j < 4; j++)
+ printf("%02X ", *ptr--);
+ printf("\n");
+ }
+ break;
+ case MMC_RSP_R3:
+ printf("\t\tMMC_RSP_R3,4\t\t 0x%08X \n",
+ cmd->response[0]);
+ break;
+ default:
+ printf("\t\tERROR MMC rsp not supported\n");
+ break;
+ }
+#else
+ ret = mmc->send_cmd(mmc, cmd, data);
+#endif
+ mmc_bounce_buffer_stop(&backup, data);
+ return ret;
+}
+
+int mmc_send_status(struct mmc *mmc, int timeout)
+{
+ struct mmc_cmd cmd;
+ int err, retries = 5;
+#ifdef CONFIG_MMC_TRACE
+ int status;
+#endif
+
+ cmd.cmdidx = MMC_CMD_SEND_STATUS;
+ cmd.resp_type = MMC_RSP_R1;
+ if (!mmc_host_is_spi(mmc))
+ cmd.cmdarg = mmc->rca << 16;
+ cmd.flags = 0;
+
+ do {
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (!err) {
+ if ((cmd.response[0] & MMC_STATUS_RDY_FOR_DATA) &&
+ (cmd.response[0] & MMC_STATUS_CURR_STATE) !=
+ MMC_STATE_PRG)
+ break;
+ else if (cmd.response[0] & MMC_STATUS_MASK) {
+ printf("Status Error: 0x%08X\n",
+ cmd.response[0]);
+ return COMM_ERR;
+ }
+ } else if (--retries < 0)
+ return err;
+
+ udelay(1000);
+
+ } while (timeout--);
+
+#ifdef CONFIG_MMC_TRACE
+ status = (cmd.response[0] & MMC_STATUS_CURR_STATE) >> 9;
+ printf("CURR STATE:%d\n", status);
+#endif
+ if (!timeout) {
+ printf("Timeout waiting card ready\n");
+ return TIMEOUT;
+ }
+
+ return 0;
}
int mmc_set_blocklen(struct mmc *mmc, int len)
return NULL;
}
+static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt)
+{
+ struct mmc_cmd cmd;
+ ulong end;
+ int err, start_cmd, end_cmd;
+
+ if (mmc->high_capacity)
+ end = start + blkcnt - 1;
+ else {
+ end = (start + blkcnt - 1) * mmc->write_bl_len;
+ start *= mmc->write_bl_len;
+ }
+
+ if (IS_SD(mmc)) {
+ start_cmd = SD_CMD_ERASE_WR_BLK_START;
+ end_cmd = SD_CMD_ERASE_WR_BLK_END;
+ } else {
+ start_cmd = MMC_CMD_ERASE_GROUP_START;
+ end_cmd = MMC_CMD_ERASE_GROUP_END;
+ }
+
+ cmd.cmdidx = start_cmd;
+ cmd.cmdarg = start;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.flags = 0;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err)
+ goto err_out;
+
+ cmd.cmdidx = end_cmd;
+ cmd.cmdarg = end;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err)
+ goto err_out;
+
+ cmd.cmdidx = MMC_CMD_ERASE;
+ cmd.cmdarg = SECURE_ERASE;
+ cmd.resp_type = MMC_RSP_R1b;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err)
+ goto err_out;
+
+ return 0;
+
+err_out:
+ puts("mmc erase failed\n");
+ return err;
+}
+
+static unsigned long
+mmc_berase(int dev_num, unsigned long start, lbaint_t blkcnt)
+{
+ int err = 0;
+ struct mmc *mmc = find_mmc_device(dev_num);
+ lbaint_t blk = 0, blk_r = 0;
+ int timeout = 1000;
+
+ if (!mmc)
+ return -1;
+
+ if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size))
+ printf("\n\nCaution! Your devices Erase group is 0x%x\n"
+ "The erase range would be change to 0x%lx~0x%lx\n\n",
+ mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1),
+ ((start + blkcnt + mmc->erase_grp_size)
+ & ~(mmc->erase_grp_size - 1)) - 1);
+
+ while (blk < blkcnt) {
+ blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ?
+ mmc->erase_grp_size : (blkcnt - blk);
+ err = mmc_erase_t(mmc, start + blk, blk_r);
+ if (err)
+ break;
+
+ blk += blk_r;
+
+ /* Waiting for the ready status */
+ if (mmc_send_status(mmc, timeout))
+ return 0;
+ }
+
+ return blk;
+}
+
static ulong
mmc_write_blocks(struct mmc *mmc, ulong start, lbaint_t blkcnt, const void*src)
{
struct mmc_cmd cmd;
struct mmc_data data;
+ int timeout = 1000;
if ((start + blkcnt) > mmc->block_dev.lba) {
printf("MMC: block number 0x%lx exceeds max(0x%lx)\n",
return 0;
}
- if (blkcnt > 1) {
+ /* SPI multiblock writes terminate using a special
+ * token, not a STOP_TRANSMISSION request.
+ */
+ if (!mmc_host_is_spi(mmc) && blkcnt > 1) {
cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION;
cmd.cmdarg = 0;
cmd.resp_type = MMC_RSP_R1b;
}
}
+ /* Waiting for the ready status */
+ if (mmc_send_status(mmc, timeout))
+ return 0;
+
return blkcnt;
}
return 0;
do {
- /*
- * The 65535 constraint comes from some hardware has
- * only 16 bit width block number counter
- */
- cur = (blocks_todo > 65535) ? 65535 : blocks_todo;
+ cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo;
if(mmc_write_blocks(mmc, start, cur, src) != cur)
return 0;
blocks_todo -= cur;
return blkcnt;
}
-int mmc_read_block(struct mmc *mmc, void *dst, uint blocknum)
+int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt)
{
struct mmc_cmd cmd;
struct mmc_data data;
- cmd.cmdidx = MMC_CMD_READ_SINGLE_BLOCK;
+ if (blkcnt > 1)
+ cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK;
+ else
+ cmd.cmdidx = MMC_CMD_READ_SINGLE_BLOCK;
if (mmc->high_capacity)
- cmd.cmdarg = blocknum;
+ cmd.cmdarg = start;
else
- cmd.cmdarg = blocknum * mmc->read_bl_len;
+ cmd.cmdarg = start * mmc->read_bl_len;
cmd.resp_type = MMC_RSP_R1;
cmd.flags = 0;
data.dest = dst;
- data.blocks = 1;
+ data.blocks = blkcnt;
data.blocksize = mmc->read_bl_len;
data.flags = MMC_DATA_READ;
- return mmc_send_cmd(mmc, &cmd, &data);
-}
-
-int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size)
-{
- char *buffer;
- int i;
- int blklen = mmc->read_bl_len;
- int startblock = lldiv(src, mmc->read_bl_len);
- int endblock = lldiv(src + size - 1, mmc->read_bl_len);
- int err = 0;
-
- /* Make a buffer big enough to hold all the blocks we might read */
- buffer = malloc(blklen);
-
- if (!buffer) {
- printf("Could not allocate buffer for MMC read!\n");
- return -1;
- }
-
- /* We always do full block reads from the card */
- err = mmc_set_blocklen(mmc, mmc->read_bl_len);
-
- if (err)
- goto free_buffer;
-
- for (i = startblock; i <= endblock; i++) {
- int segment_size;
- int offset;
-
- err = mmc_read_block(mmc, buffer, i);
-
- if (err)
- goto free_buffer;
-
- /*
- * The first block may not be aligned, so we
- * copy from the desired point in the block
- */
- offset = (src & (blklen - 1));
- segment_size = MIN(blklen - offset, size);
-
- memcpy(dst, buffer + offset, segment_size);
+ if (mmc_send_cmd(mmc, &cmd, &data))
+ return 0;
- dst += segment_size;
- src += segment_size;
- size -= segment_size;
+ if (blkcnt > 1) {
+ cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION;
+ cmd.cmdarg = 0;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.flags = 0;
+ if (mmc_send_cmd(mmc, &cmd, NULL)) {
+ printf("mmc fail to send stop cmd\n");
+ return 0;
+ }
}
-free_buffer:
- free(buffer);
-
- return err;
+ return blkcnt;
}
static ulong mmc_bread(int dev_num, ulong start, lbaint_t blkcnt, void *dst)
{
- int err;
- int i;
- struct mmc *mmc = find_mmc_device(dev_num);
+ lbaint_t cur, blocks_todo = blkcnt;
+ if (blkcnt == 0)
+ return 0;
+
+ struct mmc *mmc = find_mmc_device(dev_num);
if (!mmc)
return 0;
if ((start + blkcnt) > mmc->block_dev.lba) {
- printf("MMC: block number 0x%lx exceeds max(0x%lx)",
+ printf("MMC: block number 0x%lx exceeds max(0x%lx)\n",
start + blkcnt, mmc->block_dev.lba);
return 0;
}
- /* We always do full block reads from the card */
- err = mmc_set_blocklen(mmc, mmc->read_bl_len);
- if (err) {
+ if (mmc_set_blocklen(mmc, mmc->read_bl_len))
return 0;
- }
- for (i = start; i < start + blkcnt; i++, dst += mmc->read_bl_len) {
- err = mmc_read_block(mmc, dst, i);
-
- if (err) {
- printf("block read failed: %d\n", err);
- return i - start;
- }
- }
+ do {
+ cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo;
+ if(mmc_read_blocks(mmc, dst, start, cur) != cur)
+ return 0;
+ blocks_todo -= cur;
+ start += cur;
+ dst += cur * mmc->read_bl_len;
+ } while (blocks_todo > 0);
return blkcnt;
}
* how to manage low voltages SD card is not yet
* specified.
*/
- cmd.cmdarg = mmc->voltages & 0xff8000;
+ cmd.cmdarg = mmc_host_is_spi(mmc) ? 0 :
+ (mmc->voltages & 0xff8000);
if (mmc->version == SD_VERSION_2)
cmd.cmdarg |= OCR_HCS;
if (mmc->version != SD_VERSION_2)
mmc->version = SD_VERSION_1_0;
+ if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
+ cmd.cmdidx = MMC_CMD_SPI_READ_OCR;
+ cmd.resp_type = MMC_RSP_R3;
+ cmd.cmdarg = 0;
+ cmd.flags = 0;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+ }
+
mmc->ocr = cmd.response[0];
mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS);
int mmc_send_op_cond(struct mmc *mmc)
{
- int timeout = 1000;
+ int timeout = 10000;
struct mmc_cmd cmd;
int err;
/* Some cards seem to need this */
mmc_go_idle(mmc);
+ /* Asking to the card its capabilities */
+ cmd.cmdidx = MMC_CMD_SEND_OP_COND;
+ cmd.resp_type = MMC_RSP_R3;
+ cmd.cmdarg = 0;
+ cmd.flags = 0;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+
+ udelay(1000);
+
do {
cmd.cmdidx = MMC_CMD_SEND_OP_COND;
cmd.resp_type = MMC_RSP_R3;
- cmd.cmdarg = OCR_HCS | mmc->voltages;
+ cmd.cmdarg = (mmc_host_is_spi(mmc) ? 0 :
+ (mmc->voltages &
+ (cmd.response[0] & OCR_VOLTAGE_MASK)) |
+ (cmd.response[0] & OCR_ACCESS_MODE));
+
+ if (mmc->host_caps & MMC_MODE_HC)
+ cmd.cmdarg |= OCR_HCS;
+
cmd.flags = 0;
err = mmc_send_cmd(mmc, &cmd, NULL);
if (timeout <= 0)
return UNUSABLE_ERR;
+ if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
+ cmd.cmdidx = MMC_CMD_SPI_READ_OCR;
+ cmd.resp_type = MMC_RSP_R3;
+ cmd.cmdarg = 0;
+ cmd.flags = 0;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+ }
+
mmc->version = MMC_VERSION_UNKNOWN;
mmc->ocr = cmd.response[0];
int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value)
{
struct mmc_cmd cmd;
+ int timeout = 1000;
+ int ret;
cmd.cmdidx = MMC_CMD_SWITCH;
cmd.resp_type = MMC_RSP_R1b;
cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (index << 16) |
- (value << 8);
+ (index << 16) |
+ (value << 8);
cmd.flags = 0;
- return mmc_send_cmd(mmc, &cmd, NULL);
+ ret = mmc_send_cmd(mmc, &cmd, NULL);
+
+ /* Waiting for the ready status */
+ if (!ret)
+ ret = mmc_send_status(mmc, timeout);
+
+ return ret;
+
}
int mmc_change_freq(struct mmc *mmc)
{
- char ext_csd[512];
+ ALLOC_CACHE_ALIGN_BUFFER(char, ext_csd, 512);
char cardtype;
int err;
mmc->card_caps = 0;
+ if (mmc_host_is_spi(mmc))
+ return 0;
+
/* Only version 4 supports high-speed */
if (mmc->version < MMC_VERSION_4)
return 0;
- mmc->card_caps |= MMC_MODE_4BIT;
-
err = mmc_send_ext_csd(mmc, ext_csd);
if (err)
return err;
- if (ext_csd[212] || ext_csd[213] || ext_csd[214] || ext_csd[215])
- mmc->high_capacity = 1;
-
- cardtype = ext_csd[196] & 0xf;
+ cardtype = ext_csd[EXT_CSD_CARD_TYPE] & 0xf;
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1);
return err;
/* No high-speed support */
- if (!ext_csd[185])
+ if (!ext_csd[EXT_CSD_HS_TIMING])
return 0;
/* High Speed is set, there are two types: 52MHz and 26MHz */
return 0;
}
+int mmc_switch_part(int dev_num, unsigned int part_num)
+{
+ struct mmc *mmc = find_mmc_device(dev_num);
+
+ if (!mmc)
+ return -1;
+
+ return mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF,
+ (mmc->part_config & ~PART_ACCESS_MASK)
+ | (part_num & PART_ACCESS_MASK));
+}
+
+int mmc_getcd(struct mmc *mmc)
+{
+ int cd;
+
+ cd = board_mmc_getcd(mmc);
+
+ if ((cd < 0) && mmc->getcd)
+ cd = mmc->getcd(mmc);
+
+ return cd;
+}
+
int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp)
{
struct mmc_cmd cmd;
{
int err;
struct mmc_cmd cmd;
- uint scr[2];
- uint switch_status[16];
+ ALLOC_CACHE_ALIGN_BUFFER(uint, scr, 2);
+ ALLOC_CACHE_ALIGN_BUFFER(uint, switch_status, 16);
struct mmc_data data;
int timeout;
mmc->card_caps = 0;
+ if (mmc_host_is_spi(mmc))
+ return 0;
+
/* Read the SCR to find out if this card supports higher speeds */
cmd.cmdidx = MMC_CMD_APP_CMD;
cmd.resp_type = MMC_RSP_R1;
timeout = 3;
retry_scr:
- data.dest = (char *)&scr;
+ data.dest = (char *)scr;
data.blocksize = 8;
data.blocks = 1;
data.flags = MMC_DATA_READ;
break;
}
+ if (mmc->scr[0] & SD_DATA_4BIT)
+ mmc->card_caps |= MMC_MODE_4BIT;
+
/* Version 1.0 doesn't support switching */
if (mmc->version == SD_VERSION_1_0)
return 0;
timeout = 4;
while (timeout--) {
err = sd_switch(mmc, SD_SWITCH_CHECK, 0, 1,
- (u8 *)&switch_status);
+ (u8 *)switch_status);
if (err)
return err;
break;
}
- if (mmc->scr[0] & SD_DATA_4BIT)
- mmc->card_caps |= MMC_MODE_4BIT;
-
/* If high-speed isn't supported, we return */
if (!(__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED))
return 0;
- err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, 1, (u8 *)&switch_status);
+ /*
+ * If the host doesn't support SD_HIGHSPEED, do not switch card to
+ * HIGHSPEED mode even if the card support SD_HIGHSPPED.
+ * This can avoid furthur problem when the card runs in different
+ * mode between the host.
+ */
+ if (!((mmc->host_caps & MMC_MODE_HS_52MHz) &&
+ (mmc->host_caps & MMC_MODE_HS)))
+ return 0;
+
+ err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, 1, (u8 *)switch_status);
if (err)
return err;
/* frequency bases */
/* divided by 10 to be nice to platforms without floating point */
-int fbase[] = {
+static const int fbase[] = {
10000,
100000,
1000000,
/* Multiplier values for TRAN_SPEED. Multiplied by 10 to be nice
* to platforms without floating point.
*/
-int multipliers[] = {
+static const int multipliers[] = {
0, /* reserved */
10,
12,
int mmc_startup(struct mmc *mmc)
{
- int err;
+ int err, width;
uint mult, freq;
- u64 cmult, csize;
+ u64 cmult, csize, capacity;
struct mmc_cmd cmd;
- char ext_csd[512];
+ ALLOC_CACHE_ALIGN_BUFFER(char, ext_csd, 512);
+ ALLOC_CACHE_ALIGN_BUFFER(char, test_csd, 512);
+ int timeout = 1000;
+
+#ifdef CONFIG_MMC_SPI_CRC_ON
+ if (mmc_host_is_spi(mmc)) { /* enable CRC check for spi */
+ cmd.cmdidx = MMC_CMD_SPI_CRC_ON_OFF;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = 1;
+ cmd.flags = 0;
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+
+ if (err)
+ return err;
+ }
+#endif
/* Put the Card in Identify Mode */
- cmd.cmdidx = MMC_CMD_ALL_SEND_CID;
+ cmd.cmdidx = mmc_host_is_spi(mmc) ? MMC_CMD_SEND_CID :
+ MMC_CMD_ALL_SEND_CID; /* cmd not supported in spi */
cmd.resp_type = MMC_RSP_R2;
cmd.cmdarg = 0;
cmd.flags = 0;
* For SD cards, get the Relatvie Address.
* This also puts the cards into Standby State
*/
- cmd.cmdidx = SD_CMD_SEND_RELATIVE_ADDR;
- cmd.cmdarg = mmc->rca << 16;
- cmd.resp_type = MMC_RSP_R6;
- cmd.flags = 0;
+ if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
+ cmd.cmdidx = SD_CMD_SEND_RELATIVE_ADDR;
+ cmd.cmdarg = mmc->rca << 16;
+ cmd.resp_type = MMC_RSP_R6;
+ cmd.flags = 0;
- err = mmc_send_cmd(mmc, &cmd, NULL);
+ err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err)
- return err;
+ if (err)
+ return err;
- if (IS_SD(mmc))
- mmc->rca = (cmd.response[0] >> 16) & 0xffff;
+ if (IS_SD(mmc))
+ mmc->rca = (cmd.response[0] >> 16) & 0xffff;
+ }
/* Get the Card-Specific Data */
cmd.cmdidx = MMC_CMD_SEND_CSD;
err = mmc_send_cmd(mmc, &cmd, NULL);
+ /* Waiting for the ready status */
+ mmc_send_status(mmc, timeout);
+
if (err)
return err;
mmc->write_bl_len = 512;
/* Select the card, and put it into Transfer Mode */
- cmd.cmdidx = MMC_CMD_SELECT_CARD;
- cmd.resp_type = MMC_RSP_R1b;
- cmd.cmdarg = mmc->rca << 16;
- cmd.flags = 0;
- err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
+ cmd.cmdidx = MMC_CMD_SELECT_CARD;
+ cmd.resp_type = MMC_RSP_R1;
+ cmd.cmdarg = mmc->rca << 16;
+ cmd.flags = 0;
+ err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err)
- return err;
+ if (err)
+ return err;
+ }
+ /*
+ * For SD, its erase group is always one sector
+ */
+ mmc->erase_grp_size = 1;
+ mmc->part_config = MMCPART_NOAVAILABLE;
if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) {
/* check ext_csd version and capacity */
err = mmc_send_ext_csd(mmc, ext_csd);
- if (!err & (ext_csd[192] >= 2)) {
- mmc->capacity = ext_csd[212] << 0 | ext_csd[213] << 8 |
- ext_csd[214] << 16 | ext_csd[215] << 24;
- mmc->capacity *= 512;
+ if (!err & (ext_csd[EXT_CSD_REV] >= 2)) {
+ /*
+ * According to the JEDEC Standard, the value of
+ * ext_csd's capacity is valid if the value is more
+ * than 2GB
+ */
+ capacity = ext_csd[EXT_CSD_SEC_CNT] << 0
+ | ext_csd[EXT_CSD_SEC_CNT + 1] << 8
+ | ext_csd[EXT_CSD_SEC_CNT + 2] << 16
+ | ext_csd[EXT_CSD_SEC_CNT + 3] << 24;
+ capacity *= 512;
+ if ((capacity >> 20) > 2 * 1024)
+ mmc->capacity = capacity;
}
+
+ /*
+ * Check whether GROUP_DEF is set, if yes, read out
+ * group size from ext_csd directly, or calculate
+ * the group size from the csd value.
+ */
+ if (ext_csd[EXT_CSD_ERASE_GROUP_DEF])
+ mmc->erase_grp_size =
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 512 * 1024;
+ else {
+ int erase_gsz, erase_gmul;
+ erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10;
+ erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5;
+ mmc->erase_grp_size = (erase_gsz + 1)
+ * (erase_gmul + 1);
+ }
+
+ /* store the partition info of emmc */
+ if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT)
+ mmc->part_config = ext_csd[EXT_CSD_PART_CONF];
}
if (IS_SD(mmc))
}
if (mmc->card_caps & MMC_MODE_HS)
- mmc_set_clock(mmc, 50000000);
+ mmc->tran_speed = 50000000;
else
- mmc_set_clock(mmc, 25000000);
+ mmc->tran_speed = 25000000;
} else {
- if (mmc->card_caps & MMC_MODE_4BIT) {
+ width = ((mmc->host_caps & MMC_MODE_MASK_WIDTH_BITS) >>
+ MMC_MODE_WIDTH_BITS_SHIFT);
+ for (; width >= 0; width--) {
/* Set the card to use 4 bit*/
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_BUS_WIDTH,
- EXT_CSD_BUS_WIDTH_4);
-
- if (err)
- return err;
-
- mmc_set_bus_width(mmc, 4);
- } else if (mmc->card_caps & MMC_MODE_8BIT) {
- /* Set the card to use 8 bit*/
- err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_BUS_WIDTH,
- EXT_CSD_BUS_WIDTH_8);
+ EXT_CSD_BUS_WIDTH, width);
if (err)
- return err;
+ continue;
- mmc_set_bus_width(mmc, 8);
+ if (!width) {
+ mmc_set_bus_width(mmc, 1);
+ break;
+ } else
+ mmc_set_bus_width(mmc, 4 * width);
+
+ err = mmc_send_ext_csd(mmc, test_csd);
+ if (!err && ext_csd[EXT_CSD_PARTITIONING_SUPPORT] \
+ == test_csd[EXT_CSD_PARTITIONING_SUPPORT]
+ && ext_csd[EXT_CSD_ERASE_GROUP_DEF] \
+ == test_csd[EXT_CSD_ERASE_GROUP_DEF] \
+ && ext_csd[EXT_CSD_REV] \
+ == test_csd[EXT_CSD_REV]
+ && ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] \
+ == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
+ && memcmp(&ext_csd[EXT_CSD_SEC_CNT], \
+ &test_csd[EXT_CSD_SEC_CNT], 4) == 0) {
+
+ mmc->card_caps |= width;
+ break;
+ }
}
if (mmc->card_caps & MMC_MODE_HS) {
if (mmc->card_caps & MMC_MODE_HS_52MHz)
- mmc_set_clock(mmc, 52000000);
+ mmc->tran_speed = 52000000;
else
- mmc_set_clock(mmc, 26000000);
- } else
- mmc_set_clock(mmc, 20000000);
+ mmc->tran_speed = 26000000;
+ }
}
+ mmc_set_clock(mmc, mmc->tran_speed);
+
/* fill in device description */
mmc->block_dev.lun = 0;
mmc->block_dev.type = 0;
mmc->block_dev.removable = 1;
mmc->block_dev.block_read = mmc_bread;
mmc->block_dev.block_write = mmc_bwrite;
+ mmc->block_dev.block_erase = mmc_berase;
+ if (!mmc->b_max)
+ mmc->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
INIT_LIST_HEAD (&mmc->link);
return 0;
}
+#ifdef CONFIG_PARTITIONS
block_dev_desc_t *mmc_get_dev(int dev)
{
struct mmc *mmc = find_mmc_device(dev);
+ if (!mmc)
+ return NULL;
- return mmc ? &mmc->block_dev : NULL;
+ mmc_init(mmc);
+ return &mmc->block_dev;
}
+#endif
int mmc_init(struct mmc *mmc)
{
int err;
+ if (mmc_getcd(mmc) == 0) {
+ mmc->has_init = 0;
+ printf("MMC: no card present\n");
+ return NO_CARD_ERR;
+ }
+
+ if (mmc->has_init)
+ return 0;
+
err = mmc->init(mmc);
if (err)
if (err)
return err;
+ /* The internal partition reset to user partition(0) at every CMD0*/
+ mmc->part_num = 0;
+
/* Test for SD version 2 */
err = mmc_send_if_cond(mmc);
}
}
- return mmc_startup(mmc);
+ err = mmc_startup(mmc);
+ if (err)
+ mmc->has_init = 0;
+ else
+ mmc->has_init = 1;
+ return err;
}
/*
printf("\n");
}
+int get_mmc_num(void)
+{
+ return cur_dev_num;
+}
+
int mmc_initialize(bd_t *bis)
{
INIT_LIST_HEAD (&mmc_devices);