Merge branch 'master' of git://git.denx.de/u-boot-avr32
[oweals/u-boot.git] / drivers / mmc / mmc.c
index 96facb76596fde849a20caa72c4c5df297c87184..49c3349f55f237e02682a4c9d65043aafd7cd2c1 100644 (file)
 static struct list_head mmc_devices;
 static int cur_dev_num = -1;
 
-int __board_mmc_getcd(u8 *cd, struct mmc *mmc) {
+int __board_mmc_getcd(struct mmc *mmc) {
        return -1;
 }
 
-int board_mmc_getcd(u8 *cd, struct mmc *mmc)__attribute__((weak,
+int board_mmc_getcd(struct mmc *mmc)__attribute__((weak,
        alias("__board_mmc_getcd")));
 
 int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
@@ -108,7 +108,7 @@ int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 int mmc_send_status(struct mmc *mmc, int timeout)
 {
        struct mmc_cmd cmd;
-       int err;
+       int err, retries = 5;
 #ifdef CONFIG_MMC_TRACE
        int status;
 #endif
@@ -121,17 +121,21 @@ int mmc_send_status(struct mmc *mmc, int timeout)
 
        do {
                err = mmc_send_cmd(mmc, &cmd, NULL);
-               if (err)
+               if (!err) {
+                       if ((cmd.response[0] & MMC_STATUS_RDY_FOR_DATA) &&
+                           (cmd.response[0] & MMC_STATUS_CURR_STATE) !=
+                            MMC_STATE_PRG)
+                               break;
+                       else if (cmd.response[0] & MMC_STATUS_MASK) {
+                               printf("Status Error: 0x%08X\n",
+                                       cmd.response[0]);
+                               return COMM_ERR;
+                       }
+               } else if (--retries < 0)
                        return err;
-               else if (cmd.response[0] & MMC_STATUS_RDY_FOR_DATA)
-                       break;
 
                udelay(1000);
 
-               if (cmd.response[0] & MMC_STATUS_MASK) {
-                       printf("Status Error: 0x%08X\n", cmd.response[0]);
-                       return COMM_ERR;
-               }
        } while (timeout--);
 
 #ifdef CONFIG_MMC_TRACE
@@ -305,11 +309,12 @@ mmc_write_blocks(struct mmc *mmc, ulong start, lbaint_t blkcnt, const void*src)
                        printf("mmc fail to send stop cmd\n");
                        return 0;
                }
-
-               /* Waiting for the ready status */
-               mmc_send_status(mmc, timeout);
        }
 
+       /* Waiting for the ready status */
+       if (mmc_send_status(mmc, timeout))
+               return 0;
+
        return blkcnt;
 }
 
@@ -341,7 +346,6 @@ int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt)
 {
        struct mmc_cmd cmd;
        struct mmc_data data;
-       int timeout = 1000;
 
        if (blkcnt > 1)
                cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK;
@@ -373,9 +377,6 @@ int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt)
                        printf("mmc fail to send stop cmd\n");
                        return 0;
                }
-
-               /* Waiting for the ready status */
-               mmc_send_status(mmc, timeout);
        }
 
        return blkcnt;
@@ -610,7 +611,8 @@ int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value)
        ret = mmc_send_cmd(mmc, &cmd, NULL);
 
        /* Waiting for the ready status */
-       mmc_send_status(mmc, timeout);
+       if (!ret)
+               ret = mmc_send_status(mmc, timeout);
 
        return ret;
 
@@ -674,6 +676,18 @@ int mmc_switch_part(int dev_num, unsigned int part_num)
                          | (part_num & PART_ACCESS_MASK));
 }
 
+int mmc_getcd(struct mmc *mmc)
+{
+       int cd;
+
+       cd = board_mmc_getcd(mmc);
+
+       if ((cd < 0) && mmc->getcd)
+               cd = mmc->getcd(mmc);
+
+       return cd;
+}
+
 int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp)
 {
        struct mmc_cmd cmd;
@@ -785,6 +799,16 @@ retry_scr:
        if (!(__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED))
                return 0;
 
+       /*
+        * If the host doesn't support SD_HIGHSPEED, do not switch card to
+        * HIGHSPEED mode even if the card support SD_HIGHSPPED.
+        * This can avoid furthur problem when the card runs in different
+        * mode between the host.
+        */
+       if (!((mmc->host_caps & MMC_MODE_HS_52MHz) &&
+               (mmc->host_caps & MMC_MODE_HS)))
+               return 0;
+
        err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, 1, (u8 *)switch_status);
 
        if (err)
@@ -988,7 +1012,7 @@ int mmc_startup(struct mmc *mmc)
        /* Select the card, and put it into Transfer Mode */
        if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
                cmd.cmdidx = MMC_CMD_SELECT_CARD;
-               cmd.resp_type = MMC_RSP_R1b;
+               cmd.resp_type = MMC_RSP_R1;
                cmd.cmdarg = mmc->rca << 16;
                cmd.flags = 0;
                err = mmc_send_cmd(mmc, &cmd, NULL);
@@ -1190,7 +1214,13 @@ block_dev_desc_t *mmc_get_dev(int dev)
 
 int mmc_init(struct mmc *mmc)
 {
-       int err, retry = 3;
+       int err;
+
+       if (mmc_getcd(mmc) == 0) {
+               mmc->has_init = 0;
+               printf("MMC: no card present\n");
+               return NO_CARD_ERR;
+       }
 
        if (mmc->has_init)
                return 0;
@@ -1213,19 +1243,7 @@ int mmc_init(struct mmc *mmc)
        mmc->part_num = 0;
 
        /* Test for SD version 2 */
-       /*
-        * retry here for 3 times, as for some controller it has dynamic
-        * clock gating, and only toggle out clk when the first cmd0 send
-        * out, while some card strictly obey the 74 clocks rule, the interval
-        * may not be sufficient between the cmd0 and this cmd8, retry to
-        * fulfil the clock requirement
-        */
-       do {
-               err = mmc_send_if_cond(mmc);
-       } while (--retry > 0 && err);
-
-       if (err)
-               return err;
+       err = mmc_send_if_cond(mmc);
 
        /* Now try to get the SD card's operating condition */
        err = sd_send_op_cond(mmc);