while (size) {
status = readl(&host->reg->status);
+ debug("%s: size: %08x\n", __func__, size);
if (status & FTSDC010_STATUS_FIFO_ORUN) {
+
+ debug("%s: FIFO OVERRUN: sta: %08x\n",
+ __func__, status);
+
fifo = host->fifo_len > size ?
size : host->fifo_len;
while (size) {
status = readl(&host->reg->status);
- if (status & FTSDC010_STATUS_FIFO_ORUN) {
+ if (status & FTSDC010_STATUS_FIFO_URUN) {
fifo = host->fifo_len > size ?
size : host->fifo_len;
writel(*ptr, &host->reg->dwr);
ptr++;
}
-
} else {
udelay(1);
if (++retry >= FTSDC010_PIO_RETRY) {
}
}
-static int ftsdc010_pio_check_status(struct mmc *mmc, struct mmc_cmd *cmd,
+static int ftsdc010_check_rsp(struct mmc *mmc, struct mmc_cmd *cmd,
struct mmc_data *data)
{
struct mmc_host *host = mmc->priv;
-
unsigned int sta, clear;
- unsigned int i;
-
- /* check response and hardware status */
- clear = 0;
-
- /* chech CMD_SEND */
- for (i = 0; i < FTSDC010_CMD_RETRY; i++) {
- sta = readl(&host->reg->status);
- /* Command Complete */
- if (sta & FTSDC010_STATUS_CMD_SEND) {
- if (!data)
- clear |= FTSDC010_CLR_CMD_SEND;
- break;
- }
- }
-
- if (i > FTSDC010_CMD_RETRY) {
- printf("%s: send command timeout\n", __func__);
- return TIMEOUT;
- }
-
- /* debug: print status register and command index*/
- debug("sta: %08x cmd %d\n", sta, cmd->cmdidx);
- /* handle data FIFO */
- if ((sta & FTSDC010_STATUS_FIFO_ORUN) ||
- (sta & FTSDC010_STATUS_FIFO_URUN)) {
-
- /* Wrong DATA FIFO Flag */
- if (data == NULL)
- printf("%s, data fifo wrong: sta: %08x cmd %d\n",
- __func__, sta, cmd->cmdidx);
-
- if (sta & FTSDC010_STATUS_FIFO_ORUN)
- clear |= FTSDC010_STATUS_FIFO_ORUN;
- if (sta & FTSDC010_STATUS_FIFO_URUN)
- clear |= FTSDC010_STATUS_FIFO_URUN;
- }
+ sta = readl(&host->reg->status);
+ debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx);
/* check RSP TIMEOUT or FAIL */
if (sta & FTSDC010_STATUS_RSP_TIMEOUT) {
/* RSP TIMEOUT */
- debug("%s: RSP timeout: sta: %08x cmd %d\n",
- __func__, sta, cmd->cmdidx);
+ debug("%s: RSP timeout: sta: %08x\n", __func__, sta);
clear |= FTSDC010_CLR_RSP_TIMEOUT;
writel(clear, &host->reg->clr);
return TIMEOUT;
} else if (sta & FTSDC010_STATUS_RSP_CRC_FAIL) {
/* clear response fail bit */
- debug("%s: RSP CRC FAIL: sta: %08x cmd %d\n",
- __func__, sta, cmd->cmdidx);
+ debug("%s: RSP CRC FAIL: sta: %08x\n", __func__, sta);
clear |= FTSDC010_CLR_RSP_CRC_FAIL;
writel(clear, &host->reg->clr);
- return 0;
+ return COMM_ERR;
} else if (sta & FTSDC010_STATUS_RSP_CRC_OK) {
/* clear response CRC OK bit */
clear |= FTSDC010_CLR_RSP_CRC_OK;
}
+ writel(clear, &host->reg->clr);
+ return 0;
+}
+
+static int ftsdc010_check_data(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ struct mmc_host *host = mmc->priv;
+ unsigned int sta, clear;
+
+ sta = readl(&host->reg->status);
+ debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx);
+
/* check DATA TIMEOUT or FAIL */
if (data) {
+
+ /* Transfer Complete */
+ if (sta & FTSDC010_STATUS_DATA_END)
+ clear |= FTSDC010_STATUS_DATA_END;
+
+ /* Data CRC_OK */
+ if (sta & FTSDC010_STATUS_DATA_CRC_OK)
+ clear |= FTSDC010_STATUS_DATA_CRC_OK;
+
+ /* DATA TIMEOUT or DATA CRC FAIL */
if (sta & FTSDC010_STATUS_DATA_TIMEOUT) {
/* DATA TIMEOUT */
- debug("%s: DATA TIMEOUT: sta: %08x\n",
- __func__, sta);
+ debug("%s: DATA TIMEOUT: sta: %08x\n", __func__, sta);
clear |= FTSDC010_STATUS_DATA_TIMEOUT;
- writel(sta, &host->reg->clr);
+ writel(clear, &host->reg->clr);
+
return TIMEOUT;
} else if (sta & FTSDC010_STATUS_DATA_CRC_FAIL) {
- /* Error Interrupt */
- debug("%s: DATA CRC FAIL: sta: %08x\n",
- __func__, sta);
+ /* DATA CRC FAIL */
+ debug("%s: DATA CRC FAIL: sta: %08x\n", __func__, sta);
clear |= FTSDC010_STATUS_DATA_CRC_FAIL;
writel(clear, &host->reg->clr);
- return 0;
- } else if (sta & FTSDC010_STATUS_DATA_END) {
- /* Transfer Complete */
- clear |= FTSDC010_STATUS_DATA_END;
+ return COMM_ERR;
}
+ writel(clear, &host->reg->clr);
}
-
- /* transaction is success and clear status register */
- writel(clear, &host->reg->clr);
-
return 0;
}
unsigned int ccon;
unsigned int mask, tmpmask;
unsigned int ret;
+ unsigned int sta, i;
+
+ ret = 0;
if (data)
mask = FTSDC010_INT_MASK_RSP_TIMEOUT;
mask = FTSDC010_INT_MASK_CMD_SEND;
/* write argu reg */
- debug("%s: cmd->arg: %08x\n", __func__, cmd->cmdarg);
+ debug("%s: argu: %08x\n", __func__, host->reg->argu);
writel(cmd->cmdarg, &host->reg->argu);
- /* setup cmd reg */
- debug("cmd: %d\n", cmd->cmdidx);
- debug("resp: %08x\n", cmd->resp_type);
-
/* setup commnad */
ccon = FTSDC010_CMD_IDX(cmd->cmdidx);
/* write cmd reg */
debug("%s: ccon: %08x\n", __func__, ccon);
writel(ccon, &host->reg->cmd);
- udelay(4*FTSDC010_DELAY_UNIT);
+
+ /* check CMD_SEND */
+ for (i = 0; i < FTSDC010_CMD_RETRY; i++) {
+ /*
+ * If we read status register too fast
+ * will lead hardware error and the RSP_TIMEOUT
+ * flag will be raised incorrectly.
+ */
+ udelay(16*FTSDC010_DELAY_UNIT);
+ sta = readl(&host->reg->status);
+
+ /* Command Complete */
+ /*
+ * Note:
+ * Do not clear FTSDC010_CLR_CMD_SEND flag.
+ * (by writing FTSDC010_CLR_CMD_SEND bit to clear register)
+ * It will make the driver becomes very slow.
+ * If the operation hasn't been finished, hardware will
+ * clear this bit automatically.
+ * In origin, the driver will clear this flag if there is
+ * no data need to be read.
+ */
+ if (sta & FTSDC010_STATUS_CMD_SEND)
+ break;
+ }
+
+ if (i > FTSDC010_CMD_RETRY) {
+ printf("%s: send command timeout\n", __func__);
+ return TIMEOUT;
+ }
+
+ /* check rsp status */
+ ret = ftsdc010_check_rsp(mmc, cmd, data);
+ if (ret)
+ return ret;
+
+ /* read response if we have RSP_OK */
+ if (ccon & FTSDC010_CMD_LONG_RSP) {
+ cmd->response[0] = readl(&host->reg->rsp3);
+ cmd->response[1] = readl(&host->reg->rsp2);
+ cmd->response[2] = readl(&host->reg->rsp1);
+ cmd->response[3] = readl(&host->reg->rsp0);
+ } else {
+ cmd->response[0] = readl(&host->reg->rsp0);
+ }
/* read/write data */
if (data && (data->flags & MMC_DATA_READ)) {
data->blocksize * data->blocks);
}
- /* pio check response status */
- ret = ftsdc010_pio_check_status(mmc, cmd, data);
- if (!ret) {
- /* if it is long response */
- if (ccon & FTSDC010_CMD_LONG_RSP) {
- cmd->response[0] = readl(&host->reg->rsp3);
- cmd->response[1] = readl(&host->reg->rsp2);
- cmd->response[2] = readl(&host->reg->rsp1);
- cmd->response[3] = readl(&host->reg->rsp0);
-
- } else {
- cmd->response[0] = readl(&host->reg->rsp0);
- }
+ /* check data status */
+ if (data) {
+ ret = ftsdc010_check_data(mmc, cmd, data);
+ if (ret)
+ return ret;
}
udelay(FTSDC010_DELAY_UNIT);
/* always reset fifo since last transfer may fail */
dcon |= FTSDC010_DCR_FIFO_RST;
- /* handle sdio */
- dcon = data->blocksize | data->blocks << 15;
if (data->blocks > 1)
dcon |= FTSDC010_SDIO_CTRL1_SDIO_BLK_MODE;
#endif
{
struct mmc_host *host = mmc->priv;
unsigned char clk_div;
- unsigned char real_rate;
+ unsigned int real_rate;
unsigned int clock;
debug("%s: mmc_set_clock: %x\n", __func__, mmc->clock);
break;
}
- debug("%s: computed real_rete: %x, clk_div: %x\n",
+ debug("%s: computed real_rate: %x, clk_div: %x\n",
__func__, real_rate, clk_div);
if (clk_div > 127)
static void ftsdc010_reset(struct mmc_host *host)
{
unsigned int timeout;
+ unsigned int sta;
/* Do SDC_RST: Software reset for all register */
writel(FTSDC010_CMD_SDC_RST, &host->reg->cmd);
timeout--;
udelay(10*FTSDC010_DELAY_UNIT);
}
+
+ sta = readl(&host->reg->status);
+ if (sta & FTSDC010_STATUS_CARD_CHANGE)
+ writel(FTSDC010_CLR_CARD_CHANGE, &host->reg->clr);
}
static int ftsdc010_core_init(struct mmc *mmc)
mmc->send_cmd = ftsdc010_request;
mmc->set_ios = ftsdc010_set_ios;
mmc->init = ftsdc010_core_init;
+ mmc->getcd = NULL;
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
- mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
-
mmc->f_min = CONFIG_SYS_CLK_FREQ / 2 / (2*128);
mmc->f_max = CONFIG_SYS_CLK_FREQ / 2 / 2;