return len;
}
-int cros_ec_scan_keyboard(struct cros_ec_dev *dev, struct mbkp_keyscan *scan)
+int cros_ec_scan_keyboard(struct udevice *dev, struct mbkp_keyscan *scan)
{
- if (ec_command(dev, EC_CMD_MKBP_STATE, 0, NULL, 0, scan,
+ struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
+
+ if (ec_command(cdev, EC_CMD_MKBP_STATE, 0, NULL, 0, scan,
sizeof(scan->data)) != sizeof(scan->data))
return -1;
return 0;
}
-int cros_ec_interrupt_pending(struct cros_ec_dev *dev)
+int cros_ec_interrupt_pending(struct udevice *dev)
{
+ struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
+
/* no interrupt support : always poll */
- if (!dm_gpio_is_valid(&dev->ec_int))
+ if (!dm_gpio_is_valid(&cdev->ec_int))
return -ENOENT;
- return dm_gpio_get_value(&dev->ec_int);
+ return dm_gpio_get_value(&cdev->ec_int);
}
int cros_ec_info(struct cros_ec_dev *dev, struct ec_response_mkbp_info *info)
return 0;
}
-int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state)
+int cros_ec_set_ldo(struct udevice *dev, uint8_t index, uint8_t state)
{
+ struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
struct ec_params_ldo_set params;
params.index = index;
params.state = state;
- if (ec_command_inptr(dev, EC_CMD_LDO_SET, 0,
- ¶ms, sizeof(params),
- NULL, 0))
+ if (ec_command_inptr(cdev, EC_CMD_LDO_SET, 0, ¶ms, sizeof(params),
+ NULL, 0))
return -1;
return 0;
}
-int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state)
+int cros_ec_get_ldo(struct udevice *dev, uint8_t index, uint8_t *state)
{
+ struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
struct ec_params_ldo_get params;
struct ec_response_ldo_get *resp;
params.index = index;
- if (ec_command_inptr(dev, EC_CMD_LDO_GET, 0,
- ¶ms, sizeof(params),
- (uint8_t **)&resp, sizeof(*resp)) != sizeof(*resp))
+ if (ec_command_inptr(cdev, EC_CMD_LDO_GET, 0, ¶ms, sizeof(params),
+ (uint8_t **)&resp, sizeof(*resp)) !=
+ sizeof(*resp))
return -1;
*state = resp->state;
return 0;
}
-int cros_ec_i2c_xfer_old(struct cros_ec_dev *dev, uchar chip, uint addr,
- int alen, uchar *buffer, int len, int is_read)
-{
- union {
- struct ec_params_i2c_passthru p;
- uint8_t outbuf[EC_PROTO2_MAX_PARAM_SIZE];
- } params;
- union {
- struct ec_response_i2c_passthru r;
- uint8_t inbuf[EC_PROTO2_MAX_PARAM_SIZE];
- } response;
- struct ec_params_i2c_passthru *p = ¶ms.p;
- struct ec_response_i2c_passthru *r = &response.r;
- struct ec_params_i2c_passthru_msg *msg = p->msg;
- uint8_t *pdata;
- int read_len, write_len;
- int size;
- int rv;
-
- p->port = 0;
-
- if (alen != 1) {
- printf("Unsupported address length %d\n", alen);
- return -1;
- }
- if (is_read) {
- read_len = len;
- write_len = alen;
- p->num_msgs = 2;
- } else {
- read_len = 0;
- write_len = alen + len;
- p->num_msgs = 1;
- }
-
- size = sizeof(*p) + p->num_msgs * sizeof(*msg);
- if (size + write_len > sizeof(params)) {
- puts("Params too large for buffer\n");
- return -1;
- }
- if (sizeof(*r) + read_len > sizeof(response)) {
- puts("Read length too big for buffer\n");
- return -1;
- }
-
- /* Create a message to write the register address and optional data */
- pdata = (uint8_t *)p + size;
- msg->addr_flags = chip;
- msg->len = write_len;
- pdata[0] = addr;
- if (!is_read)
- memcpy(pdata + 1, buffer, len);
- msg++;
-
- if (read_len) {
- msg->addr_flags = chip | EC_I2C_FLAG_READ;
- msg->len = read_len;
- }
-
- rv = ec_command(dev, EC_CMD_I2C_PASSTHRU, 0, p, size + write_len,
- r, sizeof(*r) + read_len);
- if (rv < 0)
- return rv;
-
- /* Parse response */
- if (r->i2c_status & EC_I2C_STATUS_ERROR) {
- printf("Transfer failed with status=0x%x\n", r->i2c_status);
- return -1;
- }
-
- if (rv < sizeof(*r) + read_len) {
- puts("Truncated read response\n");
- return -1;
- }
-
- if (read_len)
- memcpy(buffer, r->data, read_len);
-
- return 0;
-}
-
int cros_ec_i2c_tunnel(struct udevice *dev, struct i2c_msg *in, int nmsgs)
{
struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
return 0;
}
-/**
- * get_alen() - Small parser helper function to get address length
- *
- * Returns the address length.
- */
-static uint get_alen(char *arg)
-{
- int j;
- int alen;
-
- alen = 1;
- for (j = 0; j < 8; j++) {
- if (arg[j] == '.') {
- alen = arg[j+1] - '0';
- break;
- } else if (arg[j] == '\0') {
- break;
- }
- }
- return alen;
-}
-
-#define DISP_LINE_LEN 16
-
-/*
- * TODO(sjg@chromium.org): This code copied almost verbatim from cmd_i2c.c
- * so we can remove it later.
- */
-static int cros_ec_i2c_md(struct cros_ec_dev *dev, int flag, int argc,
- char * const argv[])
-{
- u_char chip;
- uint addr, alen, length = 0x10;
- int j, nbytes, linebytes;
-
- if (argc < 2)
- return CMD_RET_USAGE;
-
- if (1 || (flag & CMD_FLAG_REPEAT) == 0) {
- /*
- * New command specified.
- */
-
- /*
- * I2C chip address
- */
- chip = simple_strtoul(argv[0], NULL, 16);
-
- /*
- * I2C data address within the chip. This can be 1 or
- * 2 bytes long. Some day it might be 3 bytes long :-).
- */
- addr = simple_strtoul(argv[1], NULL, 16);
- alen = get_alen(argv[1]);
- if (alen > 3)
- return CMD_RET_USAGE;
-
- /*
- * If another parameter, it is the length to display.
- * Length is the number of objects, not number of bytes.
- */
- if (argc > 2)
- length = simple_strtoul(argv[2], NULL, 16);
- }
-
- /*
- * Print the lines.
- *
- * We buffer all read data, so we can make sure data is read only
- * once.
- */
- nbytes = length;
- do {
- unsigned char linebuf[DISP_LINE_LEN];
- unsigned char *cp;
-
- linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
-
- if (cros_ec_i2c_xfer_old(dev, chip, addr, alen, linebuf,
- linebytes, 1))
- puts("Error reading the chip.\n");
- else {
- printf("%04x:", addr);
- cp = linebuf;
- for (j = 0; j < linebytes; j++) {
- printf(" %02x", *cp++);
- addr++;
- }
- puts(" ");
- cp = linebuf;
- for (j = 0; j < linebytes; j++) {
- if ((*cp < 0x20) || (*cp > 0x7e))
- puts(".");
- else
- printf("%c", *cp);
- cp++;
- }
- putc('\n');
- }
- nbytes -= linebytes;
- } while (nbytes > 0);
-
- return 0;
-}
-
-static int cros_ec_i2c_mw(struct cros_ec_dev *dev, int flag, int argc,
- char * const argv[])
-{
- uchar chip;
- ulong addr;
- uint alen;
- uchar byte;
- int count;
-
- if ((argc < 3) || (argc > 4))
- return CMD_RET_USAGE;
-
- /*
- * Chip is always specified.
- */
- chip = simple_strtoul(argv[0], NULL, 16);
-
- /*
- * Address is always specified.
- */
- addr = simple_strtoul(argv[1], NULL, 16);
- alen = get_alen(argv[1]);
- if (alen > 3)
- return CMD_RET_USAGE;
-
- /*
- * Value to write is always specified.
- */
- byte = simple_strtoul(argv[2], NULL, 16);
-
- /*
- * Optional count
- */
- if (argc == 4)
- count = simple_strtoul(argv[3], NULL, 16);
- else
- count = 1;
-
- while (count-- > 0) {
- if (cros_ec_i2c_xfer_old(dev, chip, addr++, alen, &byte, 1, 0))
- puts("Error writing the chip.\n");
- /*
- * Wait for the write to complete. The write can take
- * up to 10mSec (we allow a little more time).
- */
-/*
- * No write delay with FRAM devices.
- */
-#if !defined(CONFIG_SYS_I2C_FRAM)
- udelay(11000);
-#endif
- }
-
- return 0;
-}
-
-/* Temporary code until we have driver model and can use the i2c command */
-static int cros_ec_i2c_passthrough(struct cros_ec_dev *dev, int flag,
- int argc, char * const argv[])
-{
- const char *cmd;
-
- if (argc < 1)
- return CMD_RET_USAGE;
- cmd = *argv++;
- argc--;
- if (0 == strcmp("md", cmd))
- cros_ec_i2c_md(dev, flag, argc, argv);
- else if (0 == strcmp("mw", cmd))
- cros_ec_i2c_mw(dev, flag, argc, argv);
- else
- return CMD_RET_USAGE;
-
- return 0;
-}
-
static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
struct cros_ec_dev *dev;
state = simple_strtoul(argv[3], &endp, 10);
if (*argv[3] == 0 || *endp != 0)
return CMD_RET_USAGE;
- ret = cros_ec_set_ldo(dev, index, state);
+ ret = cros_ec_set_ldo(udev, index, state);
} else {
- ret = cros_ec_get_ldo(dev, index, &state);
+ ret = cros_ec_get_ldo(udev, index, &state);
if (!ret) {
printf("LDO%d: %s\n", index,
state == EC_LDO_STATE_ON ?
debug("%s: Could not access LDO%d\n", __func__, index);
return ret;
}
- } else if (0 == strcmp("i2c", cmd)) {
- ret = cros_ec_i2c_passthrough(dev, flag, argc - 2, argv + 2);
} else {
return CMD_RET_USAGE;
}
"crosec vbnvcontext [hexstring] Read [write] VbNvContext from EC\n"
"crosec ldo <idx> [<state>] Switch/Read LDO state\n"
"crosec test run tests on cros_ec\n"
- "crosec version Read CROS-EC version\n"
- "crosec i2c md chip address[.0, .1, .2] [# of objects] - read from I2C passthru\n"
- "crosec i2c mw chip address[.0, .1, .2] value [count] - write to I2C passthru (fill)"
+ "crosec version Read CROS-EC version"
);
#endif
projects / oweals / u-boot.git / blobdiff