#include <common.h>
#include <command.h>
+#include <dm.h>
#include <i2c.h>
#include <cros_ec.h>
#include <fdtdec.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm-generic/gpio.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
#ifdef DEBUG_TRACE
#define debug_trace(fmt, b...) debug(fmt, #b)
CROS_EC_CMD_HASH_TIMEOUT_MS = 2000,
};
+#ifndef CONFIG_DM_CROS_EC
static struct cros_ec_dev static_dev, *last_dev;
+#endif
DECLARE_GLOBAL_DATA_PTR;
const void *dout, int dout_len,
uint8_t **dinp, int din_len)
{
+#ifdef CONFIG_DM_CROS_EC
+ struct dm_cros_ec_ops *ops;
+#endif
int out_bytes, in_bytes;
int rv;
if (in_bytes < 0)
return in_bytes;
+#ifdef CONFIG_DM_CROS_EC
+ ops = dm_cros_ec_get_ops(dev->dev);
+ rv = ops->packet(dev->dev, out_bytes, in_bytes);
+#else
switch (dev->interface) {
#ifdef CONFIG_CROS_EC_SPI
case CROS_EC_IF_SPI:
debug("%s: Unsupported interface\n", __func__);
rv = -1;
}
+#endif
if (rv < 0)
return rv;
const void *dout, int dout_len,
uint8_t **dinp, int din_len)
{
+#ifdef CONFIG_DM_CROS_EC
+ struct dm_cros_ec_ops *ops;
+#endif
int ret = -1;
/* Handle protocol version 3 support */
dout, dout_len, dinp, din_len);
}
+#ifdef CONFIG_DM_CROS_EC
+ ops = dm_cros_ec_get_ops(dev->dev);
+ ret = ops->command(dev->dev, cmd, cmd_version,
+ (const uint8_t *)dout, dout_len, dinp, din_len);
+#else
switch (dev->interface) {
#ifdef CONFIG_CROS_EC_SPI
case CROS_EC_IF_SPI:
default:
ret = -1;
}
+#endif
return ret;
}
/* Try sending a version 3 packet */
dev->protocol_version = 3;
+ req.in_data = 0;
if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
(uint8_t **)&resp, sizeof(*resp)) > 0) {
return 0;
return 0;
}
+#ifndef CONFIG_DM_CROS_EC
/**
* Decode EC interface details from the device tree and allocate a suitable
* device.
return 0;
}
+#endif
-int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp)
+#ifdef CONFIG_DM_CROS_EC
+int cros_ec_register(struct udevice *dev)
{
+ struct cros_ec_dev *cdev = dev->uclass_priv;
+ const void *blob = gd->fdt_blob;
+ int node = dev->of_offset;
char id[MSG_BYTES];
+
+ cdev->dev = dev;
+ fdtdec_decode_gpio(blob, node, "ec-interrupt", &cdev->ec_int);
+ cdev->optimise_flash_write = fdtdec_get_bool(blob, node,
+ "optimise-flash-write");
+
+ /* we will poll the EC interrupt line */
+ fdtdec_setup_gpio(&cdev->ec_int);
+ if (fdt_gpio_isvalid(&cdev->ec_int)) {
+ gpio_request(cdev->ec_int.gpio, "cros-ec-irq");
+ gpio_direction_input(cdev->ec_int.gpio);
+ }
+
+ if (cros_ec_check_version(cdev)) {
+ debug("%s: Could not detect CROS-EC version\n", __func__);
+ return -CROS_EC_ERR_CHECK_VERSION;
+ }
+
+ if (cros_ec_read_id(cdev, id, sizeof(id))) {
+ debug("%s: Could not read KBC ID\n", __func__);
+ return -CROS_EC_ERR_READ_ID;
+ }
+
+ /* Remember this device for use by the cros_ec command */
+ debug("Google Chrome EC CROS-EC driver ready, id '%s'\n", id);
+
+ return 0;
+}
+#else
+int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp)
+{
struct cros_ec_dev *dev;
+ char id[MSG_BYTES];
+#ifdef CONFIG_DM_CROS_EC
+ struct udevice *udev;
+ int ret;
+
+ ret = uclass_find_device(UCLASS_CROS_EC, 0, &udev);
+ if (!ret)
+ device_remove(udev);
+ ret = uclass_get_device(UCLASS_CROS_EC, 0, &udev);
+ if (ret)
+ return ret;
+ dev = udev->uclass_priv;
+ return 0;
+#else
int node = 0;
*cros_ecp = NULL;
default:
return 0;
}
+#endif
/* we will poll the EC interrupt line */
fdtdec_setup_gpio(&dev->ec_int);
- if (fdt_gpio_isvalid(&dev->ec_int))
+ if (fdt_gpio_isvalid(&dev->ec_int)) {
+ gpio_request(dev->ec_int.gpio, "cros-ec-irq");
gpio_direction_input(dev->ec_int.gpio);
+ }
if (cros_ec_check_version(dev)) {
debug("%s: Could not detect CROS-EC version\n", __func__);
}
/* Remember this device for use by the cros_ec command */
- last_dev = *cros_ecp = dev;
+ *cros_ecp = dev;
+#ifndef CONFIG_DM_CROS_EC
+ last_dev = dev;
+#endif
debug("Google Chrome EC CROS-EC driver ready, id '%s'\n", id);
return 0;
}
+#endif
int cros_ec_decode_region(int argc, char * const argv[])
{
return -1;
}
-int cros_ec_decode_ec_flash(const void *blob, struct fdt_cros_ec *config)
+int cros_ec_decode_ec_flash(const void *blob, int node,
+ struct fdt_cros_ec *config)
{
- int flash_node, node;
-
- node = fdtdec_next_compatible(blob, 0, COMPAT_GOOGLE_CROS_EC);
- if (node < 0) {
- debug("Failed to find chrome-ec node'\n");
- return -1;
- }
+ int flash_node;
flash_node = fdt_subnode_offset(blob, node, "flash");
if (flash_node < 0) {
return 0;
}
+int cros_ec_i2c_xfer(struct cros_ec_dev *dev, uchar chip, uint addr,
+ int alen, uchar *buffer, int len, int is_read)
+{
+ union {
+ struct ec_params_i2c_passthru p;
+ uint8_t outbuf[EC_PROTO2_MAX_PARAM_SIZE];
+ } params;
+ union {
+ struct ec_response_i2c_passthru r;
+ uint8_t inbuf[EC_PROTO2_MAX_PARAM_SIZE];
+ } response;
+ struct ec_params_i2c_passthru *p = ¶ms.p;
+ struct ec_response_i2c_passthru *r = &response.r;
+ struct ec_params_i2c_passthru_msg *msg = p->msg;
+ uint8_t *pdata;
+ int read_len, write_len;
+ int size;
+ int rv;
+
+ p->port = 0;
+
+ if (alen != 1) {
+ printf("Unsupported address length %d\n", alen);
+ return -1;
+ }
+ if (is_read) {
+ read_len = len;
+ write_len = alen;
+ p->num_msgs = 2;
+ } else {
+ read_len = 0;
+ write_len = alen + len;
+ p->num_msgs = 1;
+ }
+
+ size = sizeof(*p) + p->num_msgs * sizeof(*msg);
+ if (size + write_len > sizeof(params)) {
+ puts("Params too large for buffer\n");
+ return -1;
+ }
+ if (sizeof(*r) + read_len > sizeof(response)) {
+ puts("Read length too big for buffer\n");
+ return -1;
+ }
+
+ /* Create a message to write the register address and optional data */
+ pdata = (uint8_t *)p + size;
+ msg->addr_flags = chip;
+ msg->len = write_len;
+ pdata[0] = addr;
+ if (!is_read)
+ memcpy(pdata + 1, buffer, len);
+ msg++;
+
+ if (read_len) {
+ msg->addr_flags = chip | EC_I2C_FLAG_READ;
+ msg->len = read_len;
+ }
+
+ rv = ec_command(dev, EC_CMD_I2C_PASSTHRU, 0, p, size + write_len,
+ r, sizeof(*r) + read_len);
+ if (rv < 0)
+ return rv;
+
+ /* Parse response */
+ if (r->i2c_status & EC_I2C_STATUS_ERROR) {
+ printf("Transfer failed with status=0x%x\n", r->i2c_status);
+ return -1;
+ }
+
+ if (rv < sizeof(*r) + read_len) {
+ puts("Truncated read response\n");
+ return -1;
+ }
+
+ if (read_len)
+ memcpy(buffer, r->data, read_len);
+
+ return 0;
+}
+
#ifdef CONFIG_CMD_CROS_EC
/**
return 0;
}
+/**
+ * get_alen() - Small parser helper function to get address length
+ *
+ * Returns the address length.
+ */
+static uint get_alen(char *arg)
+{
+ int j;
+ int alen;
+
+ alen = 1;
+ for (j = 0; j < 8; j++) {
+ if (arg[j] == '.') {
+ alen = arg[j+1] - '0';
+ break;
+ } else if (arg[j] == '\0') {
+ break;
+ }
+ }
+ return alen;
+}
+
+#define DISP_LINE_LEN 16
+
+/*
+ * TODO(sjg@chromium.org): This code copied almost verbatim from cmd_i2c.c
+ * so we can remove it later.
+ */
+static int cros_ec_i2c_md(struct cros_ec_dev *dev, int flag, int argc,
+ char * const argv[])
+{
+ u_char chip;
+ uint addr, alen, length = 0x10;
+ int j, nbytes, linebytes;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ if (1 || (flag & CMD_FLAG_REPEAT) == 0) {
+ /*
+ * New command specified.
+ */
+
+ /*
+ * I2C chip address
+ */
+ chip = simple_strtoul(argv[0], NULL, 16);
+
+ /*
+ * I2C data address within the chip. This can be 1 or
+ * 2 bytes long. Some day it might be 3 bytes long :-).
+ */
+ addr = simple_strtoul(argv[1], NULL, 16);
+ alen = get_alen(argv[1]);
+ if (alen > 3)
+ return CMD_RET_USAGE;
+
+ /*
+ * If another parameter, it is the length to display.
+ * Length is the number of objects, not number of bytes.
+ */
+ if (argc > 2)
+ length = simple_strtoul(argv[2], NULL, 16);
+ }
+
+ /*
+ * Print the lines.
+ *
+ * We buffer all read data, so we can make sure data is read only
+ * once.
+ */
+ nbytes = length;
+ do {
+ unsigned char linebuf[DISP_LINE_LEN];
+ unsigned char *cp;
+
+ linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
+
+ if (cros_ec_i2c_xfer(dev, chip, addr, alen, linebuf, linebytes,
+ 1))
+ puts("Error reading the chip.\n");
+ else {
+ printf("%04x:", addr);
+ cp = linebuf;
+ for (j = 0; j < linebytes; j++) {
+ printf(" %02x", *cp++);
+ addr++;
+ }
+ puts(" ");
+ cp = linebuf;
+ for (j = 0; j < linebytes; j++) {
+ if ((*cp < 0x20) || (*cp > 0x7e))
+ puts(".");
+ else
+ printf("%c", *cp);
+ cp++;
+ }
+ putc('\n');
+ }
+ nbytes -= linebytes;
+ } while (nbytes > 0);
+
+ return 0;
+}
+
+static int cros_ec_i2c_mw(struct cros_ec_dev *dev, int flag, int argc,
+ char * const argv[])
+{
+ uchar chip;
+ ulong addr;
+ uint alen;
+ uchar byte;
+ int count;
+
+ if ((argc < 3) || (argc > 4))
+ return CMD_RET_USAGE;
+
+ /*
+ * Chip is always specified.
+ */
+ chip = simple_strtoul(argv[0], NULL, 16);
+
+ /*
+ * Address is always specified.
+ */
+ addr = simple_strtoul(argv[1], NULL, 16);
+ alen = get_alen(argv[1]);
+ if (alen > 3)
+ return CMD_RET_USAGE;
+
+ /*
+ * Value to write is always specified.
+ */
+ byte = simple_strtoul(argv[2], NULL, 16);
+
+ /*
+ * Optional count
+ */
+ if (argc == 4)
+ count = simple_strtoul(argv[3], NULL, 16);
+ else
+ count = 1;
+
+ while (count-- > 0) {
+ if (cros_ec_i2c_xfer(dev, chip, addr++, alen, &byte, 1, 0))
+ puts("Error writing the chip.\n");
+ /*
+ * Wait for the write to complete. The write can take
+ * up to 10mSec (we allow a little more time).
+ */
+/*
+ * No write delay with FRAM devices.
+ */
+#if !defined(CONFIG_SYS_I2C_FRAM)
+ udelay(11000);
+#endif
+ }
+
+ return 0;
+}
+
+/* Temporary code until we have driver model and can use the i2c command */
+static int cros_ec_i2c_passthrough(struct cros_ec_dev *dev, int flag,
+ int argc, char * const argv[])
+{
+ const char *cmd;
+
+ if (argc < 1)
+ return CMD_RET_USAGE;
+ cmd = *argv++;
+ argc--;
+ if (0 == strcmp("md", cmd))
+ cros_ec_i2c_md(dev, flag, argc, argv);
+ else if (0 == strcmp("mw", cmd))
+ cros_ec_i2c_mw(dev, flag, argc, argv);
+ else
+ return CMD_RET_USAGE;
+
+ return 0;
+}
+
static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- struct cros_ec_dev *dev = last_dev;
+ struct cros_ec_dev *dev;
+#ifdef CONFIG_DM_CROS_EC
+ struct udevice *udev;
+#endif
const char *cmd;
int ret = 0;
cmd = argv[1];
if (0 == strcmp("init", cmd)) {
+#ifndef CONFIG_DM_CROS_EC
ret = cros_ec_init(gd->fdt_blob, &dev);
if (ret) {
printf("Could not init cros_ec device (err %d)\n", ret);
return 1;
}
+#endif
return 0;
}
+#ifdef CONFIG_DM_CROS_EC
+ ret = uclass_get_device(UCLASS_CROS_EC, 0, &udev);
+ if (ret) {
+ printf("Cannot get cros-ec device (err=%d)\n", ret);
+ return 1;
+ }
+ dev = udev->uclass_priv;
+#else
/* Just use the last allocated device; there should be only one */
if (!last_dev) {
printf("No CROS-EC device available\n");
return 1;
}
+ dev = last_dev;
+#endif
if (0 == strcmp("id", cmd)) {
char id[MSG_BYTES];
debug("%s: Could not access LDO%d\n", __func__, index);
return ret;
}
+ } else if (0 == strcmp("i2c", cmd)) {
+ ret = cros_ec_i2c_passthrough(dev, flag, argc - 2, argv + 2);
} else {
return CMD_RET_USAGE;
}
}
U_BOOT_CMD(
- crosec, 5, 1, do_cros_ec,
+ crosec, 6, 1, do_cros_ec,
"CROS-EC utility command",
"init Re-init CROS-EC (done on startup automatically)\n"
"crosec id Read CROS-EC ID\n"
"crosec vbnvcontext [hexstring] Read [write] VbNvContext from EC\n"
"crosec ldo <idx> [<state>] Switch/Read LDO state\n"
"crosec test run tests on cros_ec\n"
- "crosec version Read CROS-EC version"
+ "crosec version Read CROS-EC version\n"
+ "crosec i2c md chip address[.0, .1, .2] [# of objects] - read from I2C passthru\n"
+ "crosec i2c mw chip address[.0, .1, .2] value [count] - write to I2C passthru (fill)"
);
#endif
+
+#ifdef CONFIG_DM_CROS_EC
+UCLASS_DRIVER(cros_ec) = {
+ .id = UCLASS_CROS_EC,
+ .name = "cros_ec",
+ .per_device_auto_alloc_size = sizeof(struct cros_ec_dev),
+};
+#endif
projects / oweals / u-boot.git / blobdiff