extended (by porting the read function from the Linux kernel sources)
to support other recent Rockchip devices.
+config ROCKCHIP_OTP
+ bool "Rockchip OTP Support"
+ depends on MISC
+ help
+ Enable (read-only) access for the one-time-programmable memory block
+ found in Rockchip SoCs: accesses can either be made using byte
+ addressing and a length or through child-nodes that are generated
+ based on the e-fuse map retrieved from the DTS.
+
config VEXPRESS_CONFIG
bool "Enable support for Arm Versatile Express config bus"
depends on MISC
config SPL_CROS_EC
bool "Enable Chrome OS EC in SPL"
+ depends on SPL
help
Enable access to the Chrome OS EC in SPL. This is a separate
microcontroller typically available on a SPI bus on Chromebooks. It
config TPL_CROS_EC
bool "Enable Chrome OS EC in TPL"
+ depends on TPL
help
Enable access to the Chrome OS EC in TPL. This is a separate
microcontroller typically available on a SPI bus on Chromebooks. It
Security Monitor can be transitioned on any security failures,
like software violations or hardware security violations.
+config IRQ
+ bool "Intel Interrupt controller"
+ depends on X86 || SANDBOX
+ help
+ This enables support for Intel interrupt controllers, including ITSS.
+ Some devices have extra features, such as Apollo Lake. The
+ device has its own uclass since there are several operations
+ involved.
+
config JZ4780_EFUSE
bool "Ingenic JZ4780 eFUSE support"
depends on ARCH_JZ47XX
config MXC_OCOTP
bool "Enable MXC OCOTP Driver"
- depends on ARCH_IMX8M || ARCH_MX6 || ARCH_MX7 || ARCH_VF610
+ depends on ARCH_IMX8M || ARCH_MX6 || ARCH_MX7 || ARCH_MX7ULP || ARCH_VF610
default y
help
If you say Y here, you will get support for the One Time
disable the legacy UART, the watchdog or other devices
in the Nuvoton Super IO chips on X86 platforms.
+config P2SB
+ bool "Intel Primary-to-Sideband Bus"
+ depends on X86 || SANDBOX
+ help
+ This enables support for the Intel Primary-to-Sideband bus,
+ abbreviated to P2SB. The P2SB is used to access various peripherals
+ such as eSPI, GPIO, through memory-mapped I/O in a large chunk of PCI
+ space. The space is segmented into different channels and peripherals
+ are accessed by device-specific means within those channels. Devices
+ should be added in the device tree as subnodes of the P2SB. A
+ Peripheral Channel Register? (PCR) API is provided to access those
+ devices - see pcr_readl(), etc.
+
+config SPL_P2SB
+ bool "Intel Primary-to-Sideband Bus in SPL"
+ depends on SPL && (X86 || SANDBOX)
+ help
+ The Primary-to-Sideband bus is used to access various peripherals
+ through memory-mapped I/O in a large chunk of PCI space. The space is
+ segmented into different channels and peripherals are accessed by
+ device-specific means within those channels. Devices should be added
+ in the device tree as subnodes of the p2sb.
+
+config TPL_P2SB
+ bool "Intel Primary-to-Sideband Bus in TPL"
+ depends on TPL && (X86 || SANDBOX)
+ help
+ The Primary-to-Sideband bus is used to access various peripherals
+ through memory-mapped I/O in a large chunk of PCI space. The space is
+ segmented into different channels and peripherals are accessed by
+ device-specific means within those channels. Devices should be added
+ in the device tree as subnodes of the p2sb.
+
config PWRSEQ
bool "Enable power-sequencing drivers"
depends on DM
gdsys devices, which supply the majority of the functionality offered
by the devices. This driver supports both CON and CPU variants of the
devices, depending on the device tree entry.
+config ESM_K3
+ bool "Enable K3 ESM driver"
+ depends on ARCH_K3
+ help
+ Support ESM (Error Signaling Module) on TI K3 SoCs.
+
+config MICROCHIP_FLEXCOM
+ bool "Enable Microchip Flexcom driver"
+ depends on MISC
+ help
+ The Atmel Flexcom is just a wrapper which embeds a SPI controller,
+ an I2C controller and an USART.
+ Only one function can be used at a time and is chosen at boot time
+ according to the device tree.
+
+config K3_AVS0
+ depends on ARCH_K3 && SPL_DM_REGULATOR
+ bool "AVS class 0 support for K3 devices"
+ help
+ K3 devices have the optimized voltage values for the main voltage
+ domains stored in efuse within the VTM IP. This driver reads the
+ optimized voltage from the efuse, so that it can be programmed
+ to the PMIC on board.
+
+config ESM_PMIC
+ bool "Enable PMIC ESM driver"
+ depends on DM_PMIC
+ help
+ Support ESM (Error Signal Monitor) on PMIC devices. ESM is used
+ typically to reboot the board in error condition.
endmenu