Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblaze

[oweals/u-boot.git] / drivers / misc / Kconfig

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f1c15cb9fa4060eb62a1606930eb5f6794e63509..0e645f58be0e8b7735057461e01f0c56a14c3601 100644 (file)
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -41,6 +41,14 @@ config ROCKCHIP_EFUSE
          extended (by porting the read function from the Linux kernel sources)
          to support other recent Rockchip devices.
 
+config VEXPRESS_CONFIG
+       bool "Enable support for Arm Versatile Express config bus"
+       depends on MISC
+       help
+         If you say Y here, you will get support for accessing the
+         configuration bus on the Arm Versatile Express boards via
+         a sysreg driver.
+
 config CMD_CROS_EC
        bool "Enable crosec command"
        depends on CROS_EC
@@ -112,8 +120,16 @@ config FSL_SEC_MON
          Security Monitor can be transitioned on any security failures,
          like software violations or hardware security violations.
 
+config JZ4780_EFUSE
+       bool "Ingenic JZ4780 eFUSE support"
+       depends on ARCH_JZ47XX
+       help
+         This selects support for the eFUSE on Ingenic JZ4780 SoCs.
+
 config MXC_OCOTP
        bool "Enable MXC OCOTP Driver"
+       depends on ARCH_IMX8M || ARCH_MX6 || ARCH_MX7 || ARCH_VF610
+       default y
        help
          If you say Y here, you will get support for the One Time
          Programmable memory pages that are stored on the some
@@ -158,9 +174,18 @@ config PCA9551_I2C_ADDR
        help
          The I2C address of the PCA9551 LED controller.
 
+config STM32MP_FUSE
+       bool "Enable STM32MP fuse wrapper providing the fuse API"
+       depends on ARCH_STM32MP && MISC
+       default y if CMD_FUSE
+       help
+         If you say Y here, you will get support for the fuse API (OTP)
+         for STM32MP architecture.
+         This API is needed for CMD_FUSE.
+
 config STM32_RCC
        bool "Enable RCC driver for the STM32 SoC's family"
-       depends on STM32 && MISC
+       depends on (STM32 || ARCH_STM32MP) && MISC
        help
          Enable the STM32 RCC driver. The RCC block (Reset and Clock Control
          block) is responsible of the management of the clock and reset
@@ -186,6 +211,11 @@ config TEGRA186_BPMP
          can make requests to the BPMP. This driver is similar to an MFD
          driver in the Linux kernel.
 
+config TWL4030_LED
+       bool "Enable TWL4030 LED controller"
+       help
+         Enable this to add support for the TWL4030 LED controller.
+
 config WINBOND_W83627
        bool "Enable Winbond Super I/O driver"
        help
@@ -214,6 +244,13 @@ config SPL_I2C_EEPROM
          This option is an SPL-variant of the I2C_EEPROM option.
          See the help of I2C_EEPROM for details.
 
+config ZYNQ_GEM_I2C_MAC_OFFSET
+       hex "Set the I2C MAC offset"
+       default 0x0
+       depends on DM_I2C
+       help
+         Set the MAC offset for i2C.
+
 if I2C_EEPROM
 
 config SYS_I2C_EEPROM_ADDR
@@ -257,5 +294,48 @@ config SYS_I2C_EEPROM_ADDR_OVERFLOW
 
 endif
 
+config GDSYS_RXAUI_CTRL
+       bool "Enable gdsys RXAUI control driver"
+       depends on MISC
+       help
+         Support gdsys FPGA's RXAUI control.
+
+config GDSYS_IOEP
+       bool "Enable gdsys IOEP driver"
+       depends on MISC
+       help
+         Support gdsys FPGA's IO endpoint driver.
+
+config MPC83XX_SERDES
+       bool "Enable MPC83xx serdes driver"
+       depends on MISC
+       help
+         Support for serdes found on MPC83xx SoCs.
+
+config FS_LOADER
+       bool "Enable loader driver for file system"
+       help
+         This is file system generic loader which can be used to load
+         the file image from the storage into target such as memory.
+
+         The consumer driver would then use this loader to program whatever,
+         ie. the FPGA device.
+
+config GDSYS_SOC
+       bool "Enable gdsys SOC driver"
+       depends on MISC
+       help
+         Support for gdsys IHS SOC, a simple bus associated with each gdsys
+         IHS (Integrated Hardware Systems) FPGA, which holds all devices whose
+         register maps are contained within the FPGA's register map.
+
+config IHS_FPGA
+       bool "Enable IHS FPGA driver"
+       depends on MISC
+       help
+         Support IHS (Integrated Hardware Systems) FPGA, the main FPGAs on
+         gdsys devices, which supply the majority of the functionality offered
+         by the devices. This driver supports both CON and CPU variants of the
+         devices, depending on the device tree entry.
 
 endmenu