Merge branch 'master' of git://git.denx.de/u-boot-i2c
[oweals/u-boot.git] / drivers / i2c / mxc_i2c.c
index 3c2a9cf180cfaf9b841437ae48ef4bd867f8bf18..8e10fbb21ca96b207dce0b3660a0e415b2e85a38 100644 (file)
@@ -24,7 +24,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_HARD_I2C) && defined(CONFIG_I2C_MXC)
+#if defined(CONFIG_HARD_I2C)
 
 #include <asm/arch/mx31.h>
 #include <asm/arch/mx31-regs.h>
 #define I2SR_IIF       (1 << 1)
 #define I2SR_RX_NO_AK  (1 << 0)
 
-#ifdef CFG_I2C_MX31_PORT1
+#ifdef CONFIG_SYS_I2C_MX31_PORT1
 #define I2C_BASE       0x43f80000
-#elif defined(CFG_I2C_MX31_PORT2)
+#define I2C_CLK_OFFSET 26
+#elif defined (CONFIG_SYS_I2C_MX31_PORT2)
 #define I2C_BASE       0x43f98000
-#elif defined(CFG_I2C_MX31_PORT3)
+#define I2C_CLK_OFFSET 28
+#elif defined (CONFIG_SYS_I2C_MX31_PORT3)
 #define I2C_BASE       0x43f84000
+#define I2C_CLK_OFFSET 30
 #else
-#error "define CFG_I2C_MX31_PORTx to use the mx31 I2C driver"
+#error "define CONFIG_SYS_I2C_MX31_PORTx to use the mx31 I2C driver"
 #endif
 
 #ifdef DEBUG
 #endif
 
 static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144,
-                       160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960,
-                       1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840};
+                    160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960,
+                    1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840};
 
 void i2c_init(int speed, int unused)
 {
        int freq = mx31_get_ipg_clk();
        int i;
 
+       /* start the required I2C clock */
+       __REG(CCM_CGR0) = __REG(CCM_CGR0) | (3 << I2C_CLK_OFFSET);
+
        for (i = 0; i < 0x1f; i++)
                if (freq / div[i] <= speed)
                        break;
 
-       DPRINTF("%s: speed: %d\n", __FUNCTION__, speed);
+       DPRINTF("%s: speed: %d\n",__FUNCTION__, speed);
 
        __REG16(I2C_BASE + I2CR) = 0; /* Reset module */
        __REG16(I2C_BASE + IFDR) = i;
@@ -145,22 +151,19 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
        int timeout = 10000;
        int ret;
 
-       DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: +%d\n", \
-                               __FUNCTION__, chip, addr, alen, len);
+       DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",__FUNCTION__, chip, addr, alen, len);
 
        if (i2c_addr(chip, addr, alen)) {
                printf("i2c_addr failed\n");
                return -1;
        }
 
-       __REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA |      \
-                                       I2CR_MTX | I2CR_RSTA;
+       __REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | I2CR_MTX | I2CR_RSTA;
 
        if (tx_byte(chip << 1 | 1))
                return -1;
 
-       __REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | ((len == 1)  \
-                                                       ? I2CR_TX_NO_AK : 0);
+       __REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | ((len == 1) ? I2CR_TX_NO_AK : 0);
 
        ret = __REG16(I2C_BASE + I2DR);
 
@@ -169,8 +172,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
                        return -1;
                *buf++ = ret;
                if (len <= 1)
-                       __REG16(I2C_BASE + I2CR) = I2CR_IEN |   \
-                                       I2CR_MSTA | I2CR_TX_NO_AK;
+                       __REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | I2CR_TX_NO_AK;
        }
 
        wait_busy();
@@ -186,8 +188,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
 int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
 {
        int timeout = 10000;
-       DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",      \
-                                       __FUNCTION__, chip, addr, alen, len);
+       DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",__FUNCTION__, chip, addr, alen, len);
 
        if (i2c_addr(chip, addr, alen))
                return -1;