return speed;
}
+unsigned int get_i2c_clock(int bus)
+{
+ if (bus)
+ return gd->i2c2_clk; /* I2C2 clock */
+ else
+ return gd->i2c1_clk; /* I2C1 clock */
+}
+
void
i2c_init(int speed, int slaveadd)
{
- struct fsl_i2c *dev;
+ const struct fsl_i2c *dev;
unsigned int temp;
+ int bus_num, i;
#ifdef CONFIG_SYS_I2C_INIT_BOARD
/* Call board specific i2c bus reset routine before accessing the
*/
i2c_init_board();
#endif
- dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
-
- writeb(0, &dev->cr); /* stop I2C controller */
- udelay(5); /* let it shutdown in peace */
- temp = set_i2c_bus_speed(dev, gd->i2c1_clk, speed);
- if (gd->flags & GD_FLG_RELOC)
- i2c_bus_speed[0] = temp;
- writeb(slaveadd << 1, &dev->adr); /* write slave address */
- writeb(0x0, &dev->sr); /* clear status register */
- writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */
-
-#ifdef CONFIG_SYS_I2C2_OFFSET
- dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET);
-
- writeb(0, &dev->cr); /* stop I2C controller */
- udelay(5); /* let it shutdown in peace */
- temp = set_i2c_bus_speed(dev, gd->i2c2_clk, speed);
- if (gd->flags & GD_FLG_RELOC)
- i2c_bus_speed[1] = temp;
- writeb(slaveadd << 1, &dev->adr); /* write slave address */
- writeb(0x0, &dev->sr); /* clear status register */
- writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */
+#ifdef CONFIG_SYS_I2C2_OFFSET
+ bus_num = 2;
+#else
+ bus_num = 1;
#endif
+ for (i = 0; i < bus_num; i++) {
+ dev = i2c_dev[i];
+
+ writeb(0, &dev->cr); /* stop I2C controller */
+ udelay(5); /* let it shutdown in peace */
+ temp = set_i2c_bus_speed(dev, get_i2c_clock(i), speed);
+ if (gd->flags & GD_FLG_RELOC)
+ i2c_bus_speed[i] = temp;
+ writeb(slaveadd << 1, &dev->adr);/* write slave address */
+ writeb(0x0, &dev->sr); /* clear status register */
+ writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */
+ }
#ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT
/* Call board specific i2c bus reset routine AFTER the bus has been