+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2012 The Chromium OS Authors.
- * SPDX-License-Identifier: GPL-2.0+
*/
/*
*/
#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <pch.h>
#include <pci.h>
+#include <asm/cpu.h>
#include <asm/gpio.h>
#include <asm/io.h>
+#include <asm/pci.h>
-/* Where in config space is the register that points to the GPIO registers? */
-#define PCI_CFG_GPIOBASE 0x48
+DECLARE_GLOBAL_DATA_PTR;
-#define NUM_BANKS 3
+#define GPIO_PER_BANK 32
-/* Within the I/O space, where are the registers to control the GPIOs? */
-static struct {
- u8 use_sel;
- u8 io_sel;
- u8 lvl;
-} gpio_bank[NUM_BANKS] = {
- { 0x00, 0x04, 0x0c }, /* Bank 0 */
- { 0x30, 0x34, 0x38 }, /* Bank 1 */
- { 0x40, 0x44, 0x48 } /* Bank 2 */
+struct ich6_bank_priv {
+ /* These are I/O addresses */
+ uint16_t use_sel;
+ uint16_t io_sel;
+ uint16_t lvl;
+ u32 lvl_write_cache;
+ bool use_lvl_write_cache;
};
-static pci_dev_t dev; /* handle for 0:1f:0 */
-static u32 gpiobase; /* offset into I/O space */
-static int found_it_once; /* valid GPIO device? */
-static u32 lock[NUM_BANKS]; /* "lock" for access to pins */
+#define GPIO_USESEL_OFFSET(x) (x)
+#define GPIO_IOSEL_OFFSET(x) (x + 4)
+#define GPIO_LVL_OFFSET(x) (x + 8)
-static int bad_arg(int num, int *bank, int *bitnum)
+static int _ich6_gpio_set_value(struct ich6_bank_priv *bank, unsigned offset,
+ int value)
{
- int i = num / 32;
- int j = num % 32;
+ u32 val;
+
+ if (bank->use_lvl_write_cache)
+ val = bank->lvl_write_cache;
+ else
+ val = inl(bank->lvl);
+
+ if (value)
+ val |= (1UL << offset);
+ else
+ val &= ~(1UL << offset);
+ outl(val, bank->lvl);
+ if (bank->use_lvl_write_cache)
+ bank->lvl_write_cache = val;
- if (num < 0 || i > NUM_BANKS) {
- debug("%s: bogus gpio num: %d\n", __func__, num);
- return -1;
- }
- *bank = i;
- *bitnum = j;
return 0;
}
-static int mark_gpio(int bank, int bitnum)
+static int _ich6_gpio_set_direction(uint16_t base, unsigned offset, int dir)
{
- if (lock[bank] & (1UL << bitnum)) {
- debug("%s: %d.%d already marked\n", __func__, bank, bitnum);
- return -1;
+ u32 val;
+
+ if (!dir) {
+ val = inl(base);
+ val |= (1UL << offset);
+ outl(val, base);
+ } else {
+ val = inl(base);
+ val &= ~(1UL << offset);
+ outl(val, base);
}
- lock[bank] |= (1 << bitnum);
+
return 0;
}
-static void clear_gpio(int bank, int bitnum)
+static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
{
- lock[bank] &= ~(1 << bitnum);
-}
+ struct ich6_bank_platdata *plat = dev_get_platdata(dev);
+ u32 gpiobase;
+ int offset;
+ int ret;
+
+ ret = pch_get_gpio_base(dev->parent, &gpiobase);
+ if (ret)
+ return ret;
+
+ offset = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "reg", -1);
+ if (offset == -1) {
+ debug("%s: Invalid register offset %d\n", __func__, offset);
+ return -EINVAL;
+ }
+ plat->offset = offset;
+ plat->base_addr = gpiobase + offset;
+ plat->bank_name = fdt_getprop(gd->fdt_blob, dev_of_offset(dev),
+ "bank-name", NULL);
-static int notmine(int num, int *bank, int *bitnum)
-{
- if (bad_arg(num, bank, bitnum))
- return -1;
- return !(lock[*bank] & (1UL << *bitnum));
+ return 0;
}
-static int gpio_init(void)
+static int ich6_gpio_probe(struct udevice *dev)
{
- u8 tmpbyte;
- u16 tmpword;
- u32 tmplong;
-
- /* Have we already done this? */
- if (found_it_once)
- return 0;
-
- /* Where should it be? */
- dev = PCI_BDF(0, 0x1f, 0);
-
- /* Is the device present? */
- pci_read_config_word(dev, PCI_VENDOR_ID, &tmpword);
- if (tmpword != PCI_VENDOR_ID_INTEL) {
- debug("%s: wrong VendorID\n", __func__);
- return -1;
- }
-
- pci_read_config_word(dev, PCI_DEVICE_ID, &tmpword);
- debug("Found %04x:%04x\n", PCI_VENDOR_ID_INTEL, tmpword);
- /*
- * We'd like to validate the Device ID too, but pretty much any
- * value is either a) correct with slight differences, or b)
- * correct but undocumented. We'll have to check a bunch of other
- * things instead...
- */
-
- /* I/O should already be enabled (it's a RO bit). */
- pci_read_config_word(dev, PCI_COMMAND, &tmpword);
- if (!(tmpword & PCI_COMMAND_IO)) {
- debug("%s: device IO not enabled\n", __func__);
- return -1;
- }
-
- /* Header Type must be normal (bits 6-0 only; see spec.) */
- pci_read_config_byte(dev, PCI_HEADER_TYPE, &tmpbyte);
- if ((tmpbyte & 0x7f) != PCI_HEADER_TYPE_NORMAL) {
- debug("%s: invalid Header type\n", __func__);
- return -1;
- }
-
- /* Base Class must be a bridge device */
- pci_read_config_byte(dev, PCI_CLASS_CODE, &tmpbyte);
- if (tmpbyte != PCI_CLASS_CODE_BRIDGE) {
- debug("%s: invalid class\n", __func__);
- return -1;
- }
- /* Sub Class must be ISA */
- pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &tmpbyte);
- if (tmpbyte != PCI_CLASS_SUB_CODE_BRIDGE_ISA) {
- debug("%s: invalid subclass\n", __func__);
- return -1;
- }
-
- /* Programming Interface must be 0x00 (no others exist) */
- pci_read_config_byte(dev, PCI_CLASS_PROG, &tmpbyte);
- if (tmpbyte != 0x00) {
- debug("%s: invalid interface type\n", __func__);
- return -1;
- }
-
- /*
- * GPIOBASE moved to its current offset with ICH6, but prior to
- * that it was unused (or undocumented). Check that it looks
- * okay: not all ones or zeros, and mapped to I/O space (bit 0).
- */
- pci_read_config_dword(dev, PCI_CFG_GPIOBASE, &tmplong);
- if (tmplong == 0x00000000 || tmplong == 0xffffffff ||
- !(tmplong & 0x00000001)) {
- debug("%s: unexpected GPIOBASE value\n", __func__);
- return -1;
- }
-
- /*
- * Okay, I guess we're looking at the right device. The actual
- * GPIO registers are in the PCI device's I/O space, starting
- * at the offset that we just read. Bit 0 indicates that it's
- * an I/O address, not a memory address, so mask that off.
- */
- gpiobase = tmplong & 0xfffffffe;
+ struct ich6_bank_platdata *plat = dev_get_platdata(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct ich6_bank_priv *bank = dev_get_priv(dev);
+ const void *prop;
+
+ uc_priv->gpio_count = GPIO_PER_BANK;
+ uc_priv->bank_name = plat->bank_name;
+ bank->use_sel = plat->base_addr;
+ bank->io_sel = plat->base_addr + 4;
+ bank->lvl = plat->base_addr + 8;
+
+ prop = fdt_getprop(gd->fdt_blob, dev_of_offset(dev),
+ "use-lvl-write-cache", NULL);
+ if (prop)
+ bank->use_lvl_write_cache = true;
+ else
+ bank->use_lvl_write_cache = false;
+ bank->lvl_write_cache = 0;
- /* Finally. These are the droids we're looking for. */
- found_it_once = 1;
return 0;
}
-int gpio_request(unsigned num, const char *label /* UNUSED */)
+static int ich6_gpio_request(struct udevice *dev, unsigned offset,
+ const char *label)
{
+ struct ich6_bank_priv *bank = dev_get_priv(dev);
u32 tmplong;
- int i = 0, j = 0;
-
- /* Is the hardware ready? */
- if (gpio_init())
- return -1;
-
- if (bad_arg(num, &i, &j))
- return -1;
/*
* Make sure that the GPIO pin we want isn't already in use for some
* built-in hardware function. We have to check this for every
* requested pin.
*/
- tmplong = inl(gpiobase + gpio_bank[i].use_sel);
- if (!(tmplong & (1UL << j))) {
+ tmplong = inl(bank->use_sel);
+ if (!(tmplong & (1UL << offset))) {
debug("%s: gpio %d is reserved for internal use\n", __func__,
- num);
- return -1;
+ offset);
+ return -EPERM;
}
- return mark_gpio(i, j);
-}
-
-int gpio_free(unsigned num)
-{
- int i = 0, j = 0;
-
- if (notmine(num, &i, &j))
- return -1;
-
- clear_gpio(i, j);
return 0;
}
-int gpio_direction_input(unsigned num)
+static int ich6_gpio_direction_input(struct udevice *dev, unsigned offset)
{
- u32 tmplong;
- int i = 0, j = 0;
-
- if (notmine(num, &i, &j))
- return -1;
+ struct ich6_bank_priv *bank = dev_get_priv(dev);
- tmplong = inl(gpiobase + gpio_bank[i].io_sel);
- tmplong |= (1UL << j);
- outl(gpiobase + gpio_bank[i].io_sel, tmplong);
- return 0;
+ return _ich6_gpio_set_direction(bank->io_sel, offset, 0);
}
-int gpio_direction_output(unsigned num, int value)
+static int ich6_gpio_direction_output(struct udevice *dev, unsigned offset,
+ int value)
{
- u32 tmplong;
- int i = 0, j = 0;
+ int ret;
+ struct ich6_bank_priv *bank = dev_get_priv(dev);
- if (notmine(num, &i, &j))
- return -1;
+ ret = _ich6_gpio_set_direction(bank->io_sel, offset, 1);
+ if (ret)
+ return ret;
- tmplong = inl(gpiobase + gpio_bank[i].io_sel);
- tmplong &= ~(1UL << j);
- outl(gpiobase + gpio_bank[i].io_sel, tmplong);
- return 0;
+ return _ich6_gpio_set_value(bank, offset, value);
}
-int gpio_get_value(unsigned num)
+static int ich6_gpio_get_value(struct udevice *dev, unsigned offset)
{
+ struct ich6_bank_priv *bank = dev_get_priv(dev);
u32 tmplong;
- int i = 0, j = 0;
int r;
- if (notmine(num, &i, &j))
- return -1;
-
- tmplong = inl(gpiobase + gpio_bank[i].lvl);
- r = (tmplong & (1UL << j)) ? 1 : 0;
+ tmplong = inl(bank->lvl);
+ if (bank->use_lvl_write_cache)
+ tmplong |= bank->lvl_write_cache;
+ r = (tmplong & (1UL << offset)) ? 1 : 0;
return r;
}
-int gpio_set_value(unsigned num, int value)
+static int ich6_gpio_set_value(struct udevice *dev, unsigned offset,
+ int value)
{
- u32 tmplong;
- int i = 0, j = 0;
+ struct ich6_bank_priv *bank = dev_get_priv(dev);
+ return _ich6_gpio_set_value(bank, offset, value);
+}
- if (notmine(num, &i, &j))
- return -1;
+static int ich6_gpio_get_function(struct udevice *dev, unsigned offset)
+{
+ struct ich6_bank_priv *bank = dev_get_priv(dev);
+ u32 mask = 1UL << offset;
- tmplong = inl(gpiobase + gpio_bank[i].lvl);
- if (value)
- tmplong |= (1UL << j);
+ if (!(inl(bank->use_sel) & mask))
+ return GPIOF_FUNC;
+ if (inl(bank->io_sel) & mask)
+ return GPIOF_INPUT;
else
- tmplong &= ~(1UL << j);
- outl(gpiobase + gpio_bank[i].lvl, tmplong);
- return 0;
+ return GPIOF_OUTPUT;
}
+
+static const struct dm_gpio_ops gpio_ich6_ops = {
+ .request = ich6_gpio_request,
+ .direction_input = ich6_gpio_direction_input,
+ .direction_output = ich6_gpio_direction_output,
+ .get_value = ich6_gpio_get_value,
+ .set_value = ich6_gpio_set_value,
+ .get_function = ich6_gpio_get_function,
+};
+
+static const struct udevice_id intel_ich6_gpio_ids[] = {
+ { .compatible = "intel,ich6-gpio" },
+ { }
+};
+
+U_BOOT_DRIVER(gpio_ich6) = {
+ .name = "gpio_ich6",
+ .id = UCLASS_GPIO,
+ .of_match = intel_ich6_gpio_ids,
+ .ops = &gpio_ich6_ops,
+ .ofdata_to_platdata = gpio_ich6_ofdata_to_platdata,
+ .probe = ich6_gpio_probe,
+ .priv_auto_alloc_size = sizeof(struct ich6_bank_priv),
+ .platdata_auto_alloc_size = sizeof(struct ich6_bank_platdata),
+};