Merge git://git.denx.de/u-boot-fsl-qoriq
[oweals/u-boot.git] / drivers / gpio / Kconfig
index 15135e538dc6201b20a9d6c2a6eaa8c0930d59bd..6240c395395e505f479f55ba27ec6f5fb4f4f8b5 100644 (file)
@@ -67,6 +67,12 @@ config INTEL_BROADWELL_GPIO
          driver from the common Intel ICH6 driver. It supports a total of
          95 GPIOs which can be configured from the device tree.
 
+config INTEL_ICH6_GPIO
+       bool "Intel ICH6 compatible legacy GPIO driver"
+       depends on DM_GPIO
+       help
+         Say yes here to select Intel ICH6 compatible legacy GPIO driver.
+
 config IMX_RGPIO2P
        bool "i.MX7ULP RGPIO2P driver"
        depends on DM
@@ -103,6 +109,15 @@ config OMAP_GPIO
          Support GPIO controllers on the TI OMAP3/4/5 and related (such as
          AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.
 
+config CMD_PCA953X
+       bool "Enable the pca953x command"
+       help
+         Deprecated: This should be converted to driver model.
+
+         This command provides access to a pca953x GPIO device using the
+         legacy GPIO interface. Several subcommands are provided which mirror
+         the standard 'gpio' command. It should use that instead.
+
 config PM8916_GPIO
        bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
        depends on DM_GPIO && PMIC_PM8916
@@ -120,6 +135,12 @@ config PCF8575_GPIO
         Support for PCF8575 I2C 16-bit GPIO expander. Most of these
         chips are from NXP and TI.
 
+config RCAR_GPIO
+       bool "Renesas RCar GPIO driver"
+       depends on DM_GPIO && ARCH_RMOBILE
+       help
+         This driver supports the GPIO banks on Renesas RCar SoCs.
+
 config ROCKCHIP_GPIO
        bool "Rockchip GPIO driver"
        depends on DM_GPIO
@@ -150,6 +171,15 @@ config SANDBOX_GPIO_COUNT
          of 'anonymous' GPIOs that do not belong to any device or bank.
          Select a suitable value depending on your needs.
 
+config CMD_TCA642X
+       bool "tca642x - Command to access tca642x state"
+       help
+         DEPRECATED - This needs conversion to driver model
+
+         This provides a way to looking at the pin state of this device.
+         This mirrors the 'gpio' command and that should be used in preference
+         to custom code.
+
 config TEGRA_GPIO
        bool "Tegra20..210 GPIO driver"
        depends on DM_GPIO