arm64: xilinx: Move firmware functions from platform to driver

[oweals/u-boot.git] / drivers / dma / apbh_dma.c

diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c
index 0c1cd831e01df689ef1c4a7ac421b55f5a299fa4..ac589feeb7d8bd7bb3446ade1820b1ae254782b6 100644 (file)
--- a/drivers/dma/apbh_dma.c
+++ b/drivers/dma/apbh_dma.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Freescale i.MX28 APBH DMA driver
  *
@@ -6,32 +7,19 @@
  *
  * Based on code from LTIB:
  * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  */
 
 #include <linux/list.h>
 
 #include <common.h>
 #include <malloc.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch/dma.h>
+#include <asm/mach-imx/dma.h>
+#include <asm/mach-imx/regs-apbh.h>
 
 static struct mxs_dma_chan mxs_dma_channels[MXS_MAX_DMA_CHANNELS];
 
@@ -93,7 +81,7 @@ static int mxs_dma_read_semaphore(int channel)
        return tmp;
 }
 
-#ifndef        CONFIG_SYS_DCACHE_OFF
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
 void mxs_dma_flush_desc(struct mxs_dma_desc *desc)
 {
        uint32_t addr;
@@ -226,7 +214,7 @@ static int mxs_dma_reset(int channel)
 #if defined(CONFIG_MX23)
        uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_ctrl0_set);
        uint32_t offset = APBH_CTRL0_RESET_CHANNEL_OFFSET;
-#elif defined(CONFIG_MX28)
+#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7))
        uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_channel_ctrl_set);
        uint32_t offset = APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET;
 #endif
@@ -555,6 +543,28 @@ int mxs_dma_go(int chan)
        return ret;
 }
 
+/*
+ * Execute a continuously running circular DMA descriptor.
+ * NOTE: This is not intended for general use, but rather
+ *      for the LCD driver in Smart-LCD mode. It allows
+ *      continuous triggering of the RUN bit there.
+ */
+void mxs_dma_circ_start(int chan, struct mxs_dma_desc *pdesc)
+{
+       struct mxs_apbh_regs *apbh_regs =
+               (struct mxs_apbh_regs *)MXS_APBH_BASE;
+
+       mxs_dma_flush_desc(pdesc);
+
+       mxs_dma_enable_irq(chan, 1);
+
+       writel(mxs_dma_cmd_address(pdesc),
+               &apbh_regs->ch[chan].hw_apbh_ch_nxtcmdar);
+       writel(1, &apbh_regs->ch[chan].hw_apbh_ch_sema);
+       writel(1 << (chan + APBH_CTRL0_CLKGATE_CHANNEL_OFFSET),
+               &apbh_regs->hw_apbh_ctrl0_clr);
+}
+
 /*
  * Initialize the DMA hardware
  */