mmc: send CMD0 before CMD1 for some MMC cards

[oweals/u-boot.git] / drivers / ddr / fsl / ddr4_dimm_params.c

diff --git a/drivers/ddr/fsl/ddr4_dimm_params.c b/drivers/ddr/fsl/ddr4_dimm_params.c
index 2418dca6ab9468c729ecd3bcccf81d1d69f05a31..42834ca7b21ed507f4b373bb4b714cff5cc46773 100644 (file)
--- a/drivers/ddr/fsl/ddr4_dimm_params.c
+++ b/drivers/ddr/fsl/ddr4_dimm_params.c
@@ -119,17 +119,24 @@ compute_ranksize(const struct ddr4_spd_eeprom_s *spd)
  * Writes the results to the dimm_params_t structure pointed by pdimm.
  *
  */
-unsigned int
-ddr_compute_dimm_parameters(const generic_spd_eeprom_t *spd,
-                           dimm_params_t *pdimm,
-                           unsigned int dimm_number)
+unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num,
+                                        const generic_spd_eeprom_t *spd,
+                                        dimm_params_t *pdimm,
+                                        unsigned int dimm_number)
 {
        unsigned int retval;
        int i;
+       const u8 udimm_rc_e_dq[18] = {
+               0x0c, 0x2c, 0x15, 0x35, 0x15, 0x35, 0x0b, 0x2c, 0x15,
+               0x35, 0x0b, 0x35, 0x0b, 0x2c, 0x0b, 0x35, 0x15, 0x36
+       };
+       int spd_error = 0;
+       u8 *ptr;
 
        if (spd->mem_type) {
                if (spd->mem_type != SPD_MEMTYPE_DDR4) {
-                       printf("DIMM %u: is not a DDR4 SPD.\n", dimm_number);
+                       printf("Ctrl %u DIMM %u: is not a DDR4 SPD.\n",
+                              ctrl_num, dimm_number);
                        return 1;
                }
        } else {
@@ -179,6 +186,22 @@ ddr_compute_dimm_parameters(const generic_spd_eeprom_t *spd,
                /* Unbuffered DIMMs */
                if (spd->mod_section.unbuffered.addr_mapping & 0x1)
                        pdimm->mirrored_dimm = 1;
+               if ((spd->mod_section.unbuffered.mod_height & 0xe0) == 0 &&
+                   (spd->mod_section.unbuffered.ref_raw_card == 0x04)) {
+                       /* Fix SPD error found on DIMMs with raw card E0 */
+                       for (i = 0; i < 18; i++) {
+                               if (spd->mapping[i] == udimm_rc_e_dq[i])
+                                       continue;
+                               spd_error = 1;
+                               debug("SPD byte %d: 0x%x, should be 0x%x\n",
+                                     60 + i, spd->mapping[i],
+                                     udimm_rc_e_dq[i]);
+                               ptr = (u8 *)&spd->mapping[i];
+                               *ptr = udimm_rc_e_dq[i];
+                       }
+                       if (spd_error)
+                               puts("SPD DQ mapping error fixed\n");
+               }
                break;
 
        default: