#include <fsl_immap.h>
#include <asm/io.h>
-unsigned int picos_to_mclk(unsigned int picos);
-
/*
* Determine Rtt value.
*
* 16 for <= 2933MT/s
* 18 for higher
*/
-static inline unsigned int compute_cas_write_latency(void)
+static inline unsigned int compute_cas_write_latency(
+ const unsigned int ctrl_num)
{
unsigned int cwl;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
if (mclk_ps >= 1250)
cwl = 9;
else if (mclk_ps >= 1070)
* 11 if 0.935ns > tCK >= 0.833ns
* 12 if 0.833ns > tCK >= 0.75ns
*/
-static inline unsigned int compute_cas_write_latency(void)
+static inline unsigned int compute_cas_write_latency(
+ const unsigned int ctrl_num)
{
unsigned int cwl;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
if (mclk_ps >= 2500)
cwl = 5;
/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
#if !defined(CONFIG_SYS_FSL_DDR1)
+/*
+ * Check DIMM configuration, return 2 if quad-rank or two dual-rank
+ * Return 1 if other two slots configuration. Return 0 if single slot.
+ */
static inline int avoid_odt_overlap(const dimm_params_t *dimm_params)
{
#if CONFIG_DIMM_SLOTS_PER_CTLR == 1
if (dimm_params[0].n_ranks == 4)
- return 1;
+ return 2;
#endif
#if CONFIG_DIMM_SLOTS_PER_CTLR == 2
if ((dimm_params[0].n_ranks == 2) &&
(dimm_params[1].n_ranks == 2))
- return 1;
+ return 2;
#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
if (dimm_params[0].n_ranks == 4)
- return 1;
+ return 2;
#endif
+
+ if ((dimm_params[0].n_ranks != 0) &&
+ (dimm_params[2].n_ranks != 0))
+ return 1;
#endif
return 0;
}
* Avoid writing for DDR I. The new PQ38 DDR controller
* dreams up non-zero default values to be backwards compatible.
*/
-static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
+static void set_timing_cfg_0(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const dimm_params_t *dimm_params)
{
unsigned char taxpd_mclk = 0;
/* Mode register set cycle time (tMRD). */
unsigned char tmrd_mclk;
+#if defined(CONFIG_SYS_FSL_DDR4) || defined(CONFIG_SYS_FSL_DDR3)
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
+#endif
#ifdef CONFIG_SYS_FSL_DDR4
/* tXP=max(4nCK, 6ns) */
- int txp = max((get_memory_clk_period_ps() * 4), 6000); /* unit=ps */
- trwt_mclk = 2;
- twrt_mclk = 1;
- act_pd_exit_mclk = picos_to_mclk(txp);
+ int txp = max((int)mclk_ps * 4, 6000); /* unit=ps */
+ unsigned int data_rate = get_ddr_freq(ctrl_num);
+
+ /* for faster clock, need more time for data setup */
+ trwt_mclk = (data_rate/1000000 > 1900) ? 3 : 2;
+
+ /*
+ * for single quad-rank DIMM and two-slot DIMMs
+ * to avoid ODT overlap
+ */
+ switch (avoid_odt_overlap(dimm_params)) {
+ case 2:
+ twrt_mclk = 2;
+ twwt_mclk = 2;
+ trrt_mclk = 2;
+ break;
+ default:
+ twrt_mclk = 1;
+ twwt_mclk = 1;
+ trrt_mclk = 0;
+ break;
+ }
+
+ act_pd_exit_mclk = picos_to_mclk(ctrl_num, txp);
pre_pd_exit_mclk = act_pd_exit_mclk;
/*
* MRS_CYC = max(tMRD, tMOD)
* tMRD = 8nCK, tMOD = max(24nCK, 15ns)
*/
- tmrd_mclk = max(24, picos_to_mclk(15000));
+ tmrd_mclk = max(24U, picos_to_mclk(ctrl_num, 15000));
#elif defined(CONFIG_SYS_FSL_DDR3)
+ unsigned int data_rate = get_ddr_freq(ctrl_num);
+ int txp;
+ unsigned int ip_rev;
+ int odt_overlap;
/*
* (tXARD and tXARDS). Empirical?
* The DDR3 spec has not tXARD,
* we use the tXP instead of it.
- * tXP=max(3nCK, 7.5ns) for DDR3.
+ * tXP=max(3nCK, 7.5ns) for DDR3-800, 1066
+ * max(3nCK, 6ns) for DDR3-1333, 1600, 1866, 2133
* spec has not the tAXPD, we use
* tAXPD=1, need design to confirm.
*/
- int txp = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */
- unsigned int data_rate = get_ddr_freq(0);
- tmrd_mclk = 4;
+ txp = max((int)mclk_ps * 3, (mclk_ps > 1540 ? 7500 : 6000));
+
+ ip_rev = fsl_ddr_get_version(ctrl_num);
+ if (ip_rev >= 0x40700) {
+ /*
+ * MRS_CYC = max(tMRD, tMOD)
+ * tMRD = 4nCK (8nCK for RDIMM)
+ * tMOD = max(12nCK, 15ns)
+ */
+ tmrd_mclk = max((unsigned int)12,
+ picos_to_mclk(ctrl_num, 15000));
+ } else {
+ /*
+ * MRS_CYC = tMRD
+ * tMRD = 4nCK (8nCK for RDIMM)
+ */
+ if (popts->registered_dimm_en)
+ tmrd_mclk = 8;
+ else
+ tmrd_mclk = 4;
+ }
+
/* set the turnaround time */
/*
- * for single quad-rank DIMM and two dual-rank DIMMs
+ * for single quad-rank DIMM and two-slot DIMMs
* to avoid ODT overlap
*/
- if (avoid_odt_overlap(dimm_params)) {
+ odt_overlap = avoid_odt_overlap(dimm_params);
+ switch (odt_overlap) {
+ case 2:
twwt_mclk = 2;
trrt_mclk = 1;
+ break;
+ case 1:
+ twwt_mclk = 1;
+ trrt_mclk = 0;
+ break;
+ default:
+ break;
}
+
/* for faster clock, need more time for data setup */
trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1;
taxpd_mclk = 1;
} else {
/* act_pd_exit_mclk = tXARD, see above */
- act_pd_exit_mclk = picos_to_mclk(txp);
+ act_pd_exit_mclk = picos_to_mclk(ctrl_num, txp);
/* Mode register MR0[A12] is '1' - fast exit */
pre_pd_exit_mclk = act_pd_exit_mclk;
taxpd_mclk = 1;
);
debug("FSLDDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
}
-#endif /* defined(CONFIG_SYS_FSL_DDR2) */
+#endif /* !defined(CONFIG_SYS_FSL_DDR1) */
/* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */
-static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency,
- unsigned int additive_latency)
+static void set_timing_cfg_3(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency,
+ unsigned int additive_latency)
{
/* Extended precharge to activate interval (tRP) */
unsigned int ext_pretoact = 0;
/* Control Adjust */
unsigned int cntl_adj = 0;
- ext_pretoact = picos_to_mclk(common_dimm->trp_ps) >> 4;
- ext_acttopre = picos_to_mclk(common_dimm->tras_ps) >> 4;
- ext_acttorw = picos_to_mclk(common_dimm->trcd_ps) >> 4;
+ ext_pretoact = picos_to_mclk(ctrl_num, common_dimm->trp_ps) >> 4;
+ ext_acttopre = picos_to_mclk(ctrl_num, common_dimm->tras_ps) >> 4;
+ ext_acttorw = picos_to_mclk(ctrl_num, common_dimm->trcd_ps) >> 4;
ext_caslat = (2 * cas_latency - 1) >> 4;
ext_add_lat = additive_latency >> 4;
#ifdef CONFIG_SYS_FSL_DDR4
- ext_refrec = (picos_to_mclk(common_dimm->trfc1_ps) - 8) >> 4;
+ ext_refrec = (picos_to_mclk(ctrl_num, common_dimm->trfc1_ps) - 8) >> 4;
#else
- ext_refrec = (picos_to_mclk(common_dimm->trfc_ps) - 8) >> 4;
+ ext_refrec = (picos_to_mclk(ctrl_num, common_dimm->trfc_ps) - 8) >> 4;
/* ext_wrrec only deals with 16 clock and above, or 14 with OTF */
#endif
- ext_wrrec = (picos_to_mclk(common_dimm->twr_ps) +
+ ext_wrrec = (picos_to_mclk(ctrl_num, common_dimm->twr_ps) +
(popts->otf_burst_chop_en ? 2 : 0)) >> 4;
ddr->timing_cfg_3 = (0
}
/* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */
-static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency)
+static void set_timing_cfg_1(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency)
{
/* Precharge-to-activate interval (tRP) */
unsigned char pretoact_mclk;
1, 2, 3, 4, 5, 6, 7, 8, 10, 10, 12, 12, 14, 14, 0, 0};
#endif
- pretoact_mclk = picos_to_mclk(common_dimm->trp_ps);
- acttopre_mclk = picos_to_mclk(common_dimm->tras_ps);
- acttorw_mclk = picos_to_mclk(common_dimm->trcd_ps);
+ pretoact_mclk = picos_to_mclk(ctrl_num, common_dimm->trp_ps);
+ acttopre_mclk = picos_to_mclk(ctrl_num, common_dimm->tras_ps);
+ acttorw_mclk = picos_to_mclk(ctrl_num, common_dimm->trcd_ps);
/*
* Translate CAS Latency to a DDR controller field value:
* we need set extend bit for it at
* TIMING_CFG_3[EXT_CASLAT]
*/
- if (fsl_ddr_get_version() <= 0x40400)
+ if (fsl_ddr_get_version(ctrl_num) <= 0x40400)
caslat_ctrl = 2 * cas_latency - 1;
else
caslat_ctrl = (cas_latency - 1) << 1;
#endif
#ifdef CONFIG_SYS_FSL_DDR4
- refrec_ctrl = picos_to_mclk(common_dimm->trfc1_ps) - 8;
- wrrec_mclk = picos_to_mclk(common_dimm->twr_ps);
- acttoact_mclk = max(picos_to_mclk(common_dimm->trrds_ps), 4);
- wrtord_mclk = max(2, picos_to_mclk(2500));
+ refrec_ctrl = picos_to_mclk(ctrl_num, common_dimm->trfc1_ps) - 8;
+ wrrec_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps);
+ acttoact_mclk = max(picos_to_mclk(ctrl_num, common_dimm->trrds_ps), 4U);
+ wrtord_mclk = max(2U, picos_to_mclk(ctrl_num, 2500));
if ((wrrec_mclk < 1) || (wrrec_mclk > 24))
printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk);
else
wrrec_mclk = wrrec_table[wrrec_mclk - 1];
#else
- refrec_ctrl = picos_to_mclk(common_dimm->trfc_ps) - 8;
- wrrec_mclk = picos_to_mclk(common_dimm->twr_ps);
- acttoact_mclk = picos_to_mclk(common_dimm->trrd_ps);
- wrtord_mclk = picos_to_mclk(common_dimm->twtr_ps);
+ refrec_ctrl = picos_to_mclk(ctrl_num, common_dimm->trfc_ps) - 8;
+ wrrec_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps);
+ acttoact_mclk = picos_to_mclk(ctrl_num, common_dimm->trrd_ps);
+ wrtord_mclk = picos_to_mclk(ctrl_num, common_dimm->twtr_ps);
if ((wrrec_mclk < 1) || (wrrec_mclk > 16))
printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk);
else
}
/* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */
-static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency,
- unsigned int additive_latency)
+static void set_timing_cfg_2(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency,
+ unsigned int additive_latency)
{
/* Additive latency */
unsigned char add_lat_mclk;
unsigned char cke_pls;
/* Window for four activates (tFAW) */
unsigned short four_act;
+#ifdef CONFIG_SYS_FSL_DDR3
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
+#endif
/* FIXME add check that this must be less than acttorw_mclk */
add_lat_mclk = additive_latency;
#elif defined(CONFIG_SYS_FSL_DDR2)
wr_lat = cas_latency - 1;
#else
- wr_lat = compute_cas_write_latency();
+ wr_lat = compute_cas_write_latency(ctrl_num);
#endif
#ifdef CONFIG_SYS_FSL_DDR4
- rd_to_pre = picos_to_mclk(7500);
+ rd_to_pre = picos_to_mclk(ctrl_num, 7500);
#else
- rd_to_pre = picos_to_mclk(common_dimm->trtp_ps);
+ rd_to_pre = picos_to_mclk(ctrl_num, common_dimm->trtp_ps);
#endif
/*
* JEDEC has some min requirements for tRTP
wr_data_delay = popts->write_data_delay;
#ifdef CONFIG_SYS_FSL_DDR4
cpo = 0;
- cke_pls = max(3, picos_to_mclk(5000));
+ cke_pls = max(3U, picos_to_mclk(ctrl_num, 5000));
+#elif defined(CONFIG_SYS_FSL_DDR3)
+ /*
+ * cke pulse = max(3nCK, 7.5ns) for DDR3-800
+ * max(3nCK, 5.625ns) for DDR3-1066, 1333
+ * max(3nCK, 5ns) for DDR3-1600, 1866, 2133
+ */
+ cke_pls = max(3U, picos_to_mclk(ctrl_num, mclk_ps > 1870 ? 7500 :
+ (mclk_ps > 1245 ? 5625 : 5000)));
#else
- cke_pls = picos_to_mclk(popts->tcke_clock_pulse_width_ps);
+ cke_pls = FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR;
#endif
-
- four_act = picos_to_mclk(popts->tfaw_window_four_activates_ps);
+ four_act = picos_to_mclk(ctrl_num,
+ popts->tfaw_window_four_activates_ps);
ddr->timing_cfg_2 = (0
| ((add_lat_mclk & 0xf) << 28)
}
/* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */
-static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_cfg_2(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const unsigned int unq_mrs_en)
{
break;
}
}
-
+ sr_ie = popts->self_refresh_interrupt_en;
num_pr = 1; /* Make this configurable */
/*
#endif
#if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7)
- slow = get_ddr_freq(0) < 1249000000;
+ slow = get_ddr_freq(ctrl_num) < 1249000000;
#endif
- if (popts->registered_dimm_en) {
+ if (popts->registered_dimm_en)
rcw_en = 1;
- ap_en = popts->ap_en;
- } else {
+
+ /* DDR4 can have address parity for UDIMM and discrete */
+ if ((CONFIG_FSL_SDRAM_TYPE != SDRAM_TYPE_DDR4) &&
+ (!popts->registered_dimm_en)) {
ap_en = 0;
+ } else {
+ ap_en = popts->ap_en;
}
x4_en = popts->x4_en ? 1 : 0;
#ifdef CONFIG_SYS_FSL_DDR4
/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
-static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode_2(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
const unsigned int unq_mrs_en)
unsigned int wr_crc = 0; /* Disable */
unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */
unsigned int srt = 0; /* self-refresh temerature, normal range */
- unsigned int cwl = compute_cas_write_latency() - 9;
+ unsigned int cwl = compute_cas_write_latency(ctrl_num) - 9;
unsigned int mpr = 0; /* serial */
unsigned int wc_lat;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
if (popts->rtt_override)
rtt_wr = popts->rtt_wr_override_value;
}
#elif defined(CONFIG_SYS_FSL_DDR3)
/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
-static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode_2(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
const unsigned int unq_mrs_en)
unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */
unsigned int srt = 0; /* self-refresh temerature, normal range */
unsigned int asr = 0; /* auto self-refresh disable */
- unsigned int cwl = compute_cas_write_latency() - 5;
+ unsigned int cwl = compute_cas_write_latency(ctrl_num) - 5;
unsigned int pasr = 0; /* partial array self refresh disable */
if (popts->rtt_override)
#else /* for DDR2 and DDR1 */
/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
-static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode_2(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
const unsigned int unq_mrs_en)
int i;
unsigned short esdmode4 = 0; /* Extended SDRAM mode 4 */
unsigned short esdmode5; /* Extended SDRAM mode 5 */
+ int rtt_park = 0;
+ bool four_cs = false;
+ const unsigned int mclk_ps = get_memory_clk_period_ps(0);
+
+#if CONFIG_CHIP_SELECTS_PER_CTRL == 4
+ if ((ddr->cs[0].config & SDRAM_CS_CONFIG_EN) &&
+ (ddr->cs[1].config & SDRAM_CS_CONFIG_EN) &&
+ (ddr->cs[2].config & SDRAM_CS_CONFIG_EN) &&
+ (ddr->cs[3].config & SDRAM_CS_CONFIG_EN))
+ four_cs = true;
+#endif
+ if (ddr->cs[0].config & SDRAM_CS_CONFIG_EN) {
+ esdmode5 = 0x00000500; /* Data mask enable, RTT_PARK CS0 */
+ rtt_park = four_cs ? 0 : 1;
+ } else {
+ esdmode5 = 0x00000400; /* Data mask enabled */
+ }
- esdmode5 = 0x00000400; /* Data mask enabled */
+ /* set command/address parity latency */
+ if (ddr->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) {
+ if (mclk_ps >= 935) {
+ /* for DDR4-1600/1866/2133 */
+ esdmode5 |= DDR_MR5_CA_PARITY_LAT_4_CLK;
+ } else if (mclk_ps >= 833) {
+ /* for DDR4-2400 */
+ esdmode5 |= DDR_MR5_CA_PARITY_LAT_5_CLK;
+ } else {
+ printf("parity: mclk_ps = %d not supported\n", mclk_ps);
+ }
+ }
ddr->ddr_sdram_mode_9 = (0
| ((esdmode4 & 0xffff) << 16)
| ((esdmode5 & 0xffff) << 0)
);
+
+ /* Normally only the first enabled CS use 0x500, others use 0x400
+ * But when four chip-selects are all enabled, all mode registers
+ * need 0x500 to park.
+ */
+
debug("FSLDDR: ddr_sdram_mode_9) = 0x%08x\n", ddr->ddr_sdram_mode_9);
if (unq_mrs_en) { /* unique mode registers are supported */
for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (!rtt_park &&
+ (ddr->cs[i].config & SDRAM_CS_CONFIG_EN)) {
+ esdmode5 |= 0x00000500; /* RTT_PARK */
+ rtt_park = four_cs ? 0 : 1;
+ } else {
+ esdmode5 = 0x00000400;
+ }
+
+ if (ddr->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) {
+ if (mclk_ps >= 935) {
+ /* for DDR4-1600/1866/2133 */
+ esdmode5 |= DDR_MR5_CA_PARITY_LAT_4_CLK;
+ } else if (mclk_ps >= 833) {
+ /* for DDR4-2400 */
+ esdmode5 |= DDR_MR5_CA_PARITY_LAT_5_CLK;
+ } else {
+ printf("parity: mclk_ps = %d not supported\n",
+ mclk_ps);
+ }
+ }
+
switch (i) {
case 1:
ddr->ddr_sdram_mode_11 = (0
}
/* DDR SDRAM Mode configuration 10 (DDR_SDRAM_MODE_10) */
-static void set_ddr_sdram_mode_10(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode_10(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
const unsigned int unq_mrs_en)
int i;
unsigned short esdmode6 = 0; /* Extended SDRAM mode 6 */
unsigned short esdmode7 = 0; /* Extended SDRAM mode 7 */
- unsigned int tccdl_min = picos_to_mclk(common_dimm->tccdl_ps);
+ unsigned int tccdl_min = picos_to_mclk(ctrl_num, common_dimm->tccdl_ps);
esdmode6 = ((tccdl_min - 4) & 0x7) << 10;
+ if (popts->ddr_cdr2 & DDR_CDR2_VREF_RANGE_2)
+ esdmode6 |= 1 << 6; /* Range 2 */
+
ddr->ddr_sdram_mode_10 = (0
| ((esdmode6 & 0xffff) << 16)
| ((esdmode7 & 0xffff) << 0)
#endif
/* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */
-static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm)
+static void set_ddr_sdram_interval(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm)
{
unsigned int refint; /* Refresh interval */
unsigned int bstopre; /* Precharge interval */
- refint = picos_to_mclk(common_dimm->refresh_rate_ps);
+ refint = picos_to_mclk(ctrl_num, common_dimm->refresh_rate_ps);
bstopre = popts->bstopre;
#ifdef CONFIG_SYS_FSL_DDR4
/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
-static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
unsigned int cas_latency,
* 1=fast exit DLL on (tXP)
*/
- wr_mclk = picos_to_mclk(common_dimm->twr_ps);
+ wr_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps);
if (wr_mclk <= 24) {
wr = wr_table[wr_mclk - 10];
} else {
#elif defined(CONFIG_SYS_FSL_DDR3)
/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
-static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
unsigned int cas_latency,
*/
dll_on = 1;
- wr_mclk = picos_to_mclk(common_dimm->twr_ps);
+ wr_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps);
if (wr_mclk <= 16) {
wr = wr_table[wr_mclk - 5];
} else {
#else /* !CONFIG_SYS_FSL_DDR3 */
/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
-static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
+static void set_ddr_sdram_mode(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
unsigned int cas_latency,
#if defined(CONFIG_SYS_FSL_DDR1)
wr = 0; /* Historical */
#elif defined(CONFIG_SYS_FSL_DDR2)
- wr = picos_to_mclk(common_dimm->twr_ps);
+ wr = picos_to_mclk(ctrl_num, common_dimm->twr_ps);
#endif
dll_res = 0;
mode = 0;
const memctl_options_t *popts)
{
unsigned int clk_adjust; /* Clock adjust */
+ unsigned int ss_en = 0; /* Source synchronous enable */
+#if defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+ /* Per FSL Application Note: AN2805 */
+ ss_en = 1;
+#endif
clk_adjust = popts->clk_adjust;
- ddr->ddr_sdram_clk_cntl = (clk_adjust & 0xF) << 23;
+ ddr->ddr_sdram_clk_cntl = (0
+ | ((ss_en & 0x1) << 31)
+ | ((clk_adjust & 0xF) << 23)
+ );
debug("FSLDDR: clk_cntl = 0x%08x\n", ddr->ddr_sdram_clk_cntl);
}
unsigned int wrt = 0; /* Write-to-read turnaround for same CS */
unsigned int rrt = 0; /* Read-to-read turnaround for same CS */
unsigned int wwt = 0; /* Write-to-write turnaround for same CS */
+ unsigned int trwt_mclk = 0; /* ext_rwt */
unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */
#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
wwt = 2; /* BL/2 + 2 clocks */
}
#endif
-
#ifdef CONFIG_SYS_FSL_DDR4
dll_lock = 2; /* tDLLK = 1024 clocks */
#elif defined(CONFIG_SYS_FSL_DDR3)
dll_lock = 1; /* tDLLK = 512 clocks from spec */
#endif
+
+ if (popts->trwt_override)
+ trwt_mclk = popts->trwt;
+
ddr->timing_cfg_4 = (0
| ((rwt & 0xf) << 28)
| ((wrt & 0xf) << 24)
| ((rrt & 0xf) << 20)
| ((wwt & 0xf) << 16)
+ | ((trwt_mclk & 0xc) << 12)
| (dll_lock & 0x3)
);
debug("FSLDDR: timing_cfg_4 = 0x%08x\n", ddr->timing_cfg_4);
debug("FSLDDR: timing_cfg_6 = 0x%08x\n", ddr->timing_cfg_6);
}
-static void set_timing_cfg_7(fsl_ddr_cfg_regs_t *ddr,
- const common_timing_params_t *common_dimm)
+static void set_timing_cfg_7(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
+ const common_timing_params_t *common_dimm)
{
unsigned int txpr, tcksre, tcksrx;
- unsigned int cke_rst, cksre, cksrx, par_lat, cs_to_cmd;
+ unsigned int cke_rst, cksre, cksrx, par_lat = 0, cs_to_cmd;
+ const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
+
+ txpr = max(5U, picos_to_mclk(ctrl_num, common_dimm->trfc1_ps + 10000));
+ tcksre = max(5U, picos_to_mclk(ctrl_num, 10000));
+ tcksrx = max(5U, picos_to_mclk(ctrl_num, 10000));
+
+ if (ddr->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) {
+ if (mclk_ps >= 935) {
+ /* parity latency 4 clocks in case of 1600/1866/2133 */
+ par_lat = 4;
+ } else if (mclk_ps >= 833) {
+ /* parity latency 5 clocks for DDR4-2400 */
+ par_lat = 5;
+ } else {
+ printf("parity: mclk_ps = %d not supported\n", mclk_ps);
+ }
+ }
- txpr = max(5, picos_to_mclk(common_dimm->trfc1_ps + 10000));
- tcksre = max(5, picos_to_mclk(10000));
- tcksrx = max(5, picos_to_mclk(10000));
- par_lat = 0;
cs_to_cmd = 0;
if (txpr <= 200)
debug("FSLDDR: timing_cfg_7 = 0x%08x\n", ddr->timing_cfg_7);
}
-static void set_timing_cfg_8(fsl_ddr_cfg_regs_t *ddr,
+static void set_timing_cfg_8(const unsigned int ctrl_num,
+ fsl_ddr_cfg_regs_t *ddr,
const memctl_options_t *popts,
const common_timing_params_t *common_dimm,
unsigned int cas_latency)
{
unsigned int rwt_bg, wrt_bg, rrt_bg, wwt_bg;
unsigned int acttoact_bg, wrtord_bg, pre_all_rec;
- unsigned int tccdl = picos_to_mclk(common_dimm->tccdl_ps);
+ unsigned int tccdl = picos_to_mclk(ctrl_num, common_dimm->tccdl_ps);
unsigned int wr_lat = ((ddr->timing_cfg_2 & 0x00780000) >> 19) +
((ddr->timing_cfg_2 & 0x00040000) >> 14);
wwt_bg = tccdl - 4;
} else {
rrt_bg = tccdl - 2;
- wwt_bg = tccdl - 4;
+ wwt_bg = tccdl - 2;
}
- acttoact_bg = picos_to_mclk(common_dimm->trrdl_ps);
- wrtord_bg = max(4, picos_to_mclk(7500));
+ acttoact_bg = picos_to_mclk(ctrl_num, common_dimm->trrdl_ps);
+ wrtord_bg = max(4U, picos_to_mclk(ctrl_num, 7500));
if (popts->otf_burst_chop_en)
wrtord_bg += 2;
debug("FSLDDR: timing_cfg_9 = 0x%08x\n", ddr->timing_cfg_9);
}
+/* This function needs to be called after set_ddr_sdram_cfg() is called */
static void set_ddr_dq_mapping(fsl_ddr_cfg_regs_t *ddr,
const dimm_params_t *dimm_params)
{
- ddr->dq_map_0 = ((dimm_params->dq_mapping[0] & 0x3F) << 26) |
- ((dimm_params->dq_mapping[1] & 0x3F) << 20) |
- ((dimm_params->dq_mapping[2] & 0x3F) << 14) |
- ((dimm_params->dq_mapping[3] & 0x3F) << 8) |
- ((dimm_params->dq_mapping[4] & 0x3F) << 2);
-
- ddr->dq_map_1 = ((dimm_params->dq_mapping[5] & 0x3F) << 26) |
- ((dimm_params->dq_mapping[6] & 0x3F) << 20) |
- ((dimm_params->dq_mapping[7] & 0x3F) << 14) |
- ((dimm_params->dq_mapping[10] & 0x3F) << 8) |
- ((dimm_params->dq_mapping[11] & 0x3F) << 2);
-
- ddr->dq_map_2 = ((dimm_params->dq_mapping[12] & 0x3F) << 26) |
- ((dimm_params->dq_mapping[13] & 0x3F) << 20) |
- ((dimm_params->dq_mapping[14] & 0x3F) << 14) |
- ((dimm_params->dq_mapping[15] & 0x3F) << 8) |
- ((dimm_params->dq_mapping[16] & 0x3F) << 2);
-
- ddr->dq_map_3 = ((dimm_params->dq_mapping[17] & 0x3F) << 26) |
- ((dimm_params->dq_mapping[8] & 0x3F) << 20) |
- ((dimm_params->dq_mapping[9] & 0x3F) << 14) |
- dimm_params->dq_mapping_ors;
+ unsigned int acc_ecc_en = (ddr->ddr_sdram_cfg >> 2) & 0x1;
+ int i;
+
+ for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+ if (dimm_params[i].n_ranks)
+ break;
+ }
+ if (i >= CONFIG_DIMM_SLOTS_PER_CTLR) {
+ puts("DDR error: no DIMM found!\n");
+ return;
+ }
+
+ ddr->dq_map_0 = ((dimm_params[i].dq_mapping[0] & 0x3F) << 26) |
+ ((dimm_params[i].dq_mapping[1] & 0x3F) << 20) |
+ ((dimm_params[i].dq_mapping[2] & 0x3F) << 14) |
+ ((dimm_params[i].dq_mapping[3] & 0x3F) << 8) |
+ ((dimm_params[i].dq_mapping[4] & 0x3F) << 2);
+
+ ddr->dq_map_1 = ((dimm_params[i].dq_mapping[5] & 0x3F) << 26) |
+ ((dimm_params[i].dq_mapping[6] & 0x3F) << 20) |
+ ((dimm_params[i].dq_mapping[7] & 0x3F) << 14) |
+ ((dimm_params[i].dq_mapping[10] & 0x3F) << 8) |
+ ((dimm_params[i].dq_mapping[11] & 0x3F) << 2);
+
+ ddr->dq_map_2 = ((dimm_params[i].dq_mapping[12] & 0x3F) << 26) |
+ ((dimm_params[i].dq_mapping[13] & 0x3F) << 20) |
+ ((dimm_params[i].dq_mapping[14] & 0x3F) << 14) |
+ ((dimm_params[i].dq_mapping[15] & 0x3F) << 8) |
+ ((dimm_params[i].dq_mapping[16] & 0x3F) << 2);
+
+ /* dq_map for ECC[4:7] is set to 0 if accumulated ECC is enabled */
+ ddr->dq_map_3 = ((dimm_params[i].dq_mapping[17] & 0x3F) << 26) |
+ ((dimm_params[i].dq_mapping[8] & 0x3F) << 20) |
+ (acc_ecc_en ? 0 :
+ (dimm_params[i].dq_mapping[9] & 0x3F) << 14) |
+ dimm_params[i].dq_mapping_ors;
debug("FSLDDR: dq_map_0 = 0x%08x\n", ddr->dq_map_0);
debug("FSLDDR: dq_map_1 = 0x%08x\n", ddr->dq_map_1);
}
unsigned int
-compute_fsl_memctl_config_regs(const memctl_options_t *popts,
+compute_fsl_memctl_config_regs(const unsigned int ctrl_num,
+ const memctl_options_t *popts,
fsl_ddr_cfg_regs_t *ddr,
const common_timing_params_t *common_dimm,
const dimm_params_t *dimm_params,
set_ddr_eor(ddr, popts);
#if !defined(CONFIG_SYS_FSL_DDR1)
- set_timing_cfg_0(ddr, popts, dimm_params);
+ set_timing_cfg_0(ctrl_num, ddr, popts, dimm_params);
#endif
- set_timing_cfg_3(ddr, popts, common_dimm, cas_latency,
+ set_timing_cfg_3(ctrl_num, ddr, popts, common_dimm, cas_latency,
additive_latency);
- set_timing_cfg_1(ddr, popts, common_dimm, cas_latency);
- set_timing_cfg_2(ddr, popts, common_dimm,
- cas_latency, additive_latency);
+ set_timing_cfg_1(ctrl_num, ddr, popts, common_dimm, cas_latency);
+ set_timing_cfg_2(ctrl_num, ddr, popts, common_dimm,
+ cas_latency, additive_latency);
set_ddr_cdr1(ddr, popts);
set_ddr_cdr2(ddr, popts);
set_ddr_sdram_cfg(ddr, popts, common_dimm);
- ip_rev = fsl_ddr_get_version();
+ ip_rev = fsl_ddr_get_version(ctrl_num);
if (ip_rev > 0x40400)
unq_mrs_en = 1;
- if (ip_rev > 0x40700)
+ if ((ip_rev > 0x40700) && (popts->cswl_override != 0))
ddr->debug[18] = popts->cswl_override;
- set_ddr_sdram_cfg_2(ddr, popts, unq_mrs_en);
- set_ddr_sdram_mode(ddr, popts, common_dimm,
- cas_latency, additive_latency, unq_mrs_en);
- set_ddr_sdram_mode_2(ddr, popts, common_dimm, unq_mrs_en);
+ set_ddr_sdram_cfg_2(ctrl_num, ddr, popts, unq_mrs_en);
+ set_ddr_sdram_mode(ctrl_num, ddr, popts, common_dimm,
+ cas_latency, additive_latency, unq_mrs_en);
+ set_ddr_sdram_mode_2(ctrl_num, ddr, popts, common_dimm, unq_mrs_en);
#ifdef CONFIG_SYS_FSL_DDR4
set_ddr_sdram_mode_9(ddr, popts, common_dimm, unq_mrs_en);
- set_ddr_sdram_mode_10(ddr, popts, common_dimm, unq_mrs_en);
+ set_ddr_sdram_mode_10(ctrl_num, ddr, popts, common_dimm, unq_mrs_en);
#endif
- set_ddr_sdram_interval(ddr, popts, common_dimm);
+ set_ddr_sdram_interval(ctrl_num, ddr, popts, common_dimm);
set_ddr_data_init(ddr);
set_ddr_sdram_clk_cntl(ddr, popts);
set_ddr_init_addr(ddr);
#ifdef CONFIG_SYS_FSL_DDR4
set_ddr_sdram_cfg_3(ddr, popts);
set_timing_cfg_6(ddr);
- set_timing_cfg_7(ddr, common_dimm);
- set_timing_cfg_8(ddr, popts, common_dimm, cas_latency);
+ set_timing_cfg_7(ctrl_num, ddr, common_dimm);
+ set_timing_cfg_8(ctrl_num, ddr, popts, common_dimm, cas_latency);
set_timing_cfg_9(ddr);
set_ddr_dq_mapping(ddr, dimm_params);
#endif
#ifdef CONFIG_SYS_FSL_DDR_EMU
/* disble DDR training for emulator */
ddr->debug[2] = 0x00000400;
- ddr->debug[4] = 0xff800000;
+ ddr->debug[4] = 0xff800800;
+ ddr->debug[5] = 0x08000800;
+ ddr->debug[6] = 0x08000800;
+ ddr->debug[7] = 0x08000800;
+ ddr->debug[8] = 0x08000800;
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A004508
if ((ip_rev >= 0x40000) && (ip_rev < 0x40400))
projects / oweals / u-boot.git / blobdiff