* Author: Jason Jin<Jason.jin@freescale.com>
* Zhang Wei<wei.zhang@freescale.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*
* with the reference on libata and ahci drvier in kernel
- *
*/
#include <common.h>
#include <asm/io.h>
#include <malloc.h>
#include <scsi.h>
-#include <ata.h>
+#include <libata.h>
#include <linux/ctype.h>
#include <ahci.h>
+static int ata_io_flush(u8 port);
+
struct ahci_probe_ent *probe_ent = NULL;
-hd_driveid_t *ataid[AHCI_MAX_PORTS];
+u16 *ataid[AHCI_MAX_PORTS];
#define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0)
+/*
+ * Some controllers limit number of blocks they can read/write at once.
+ * Contemporary SSD devices work much faster if the read/write size is aligned
+ * to a power of 2. Let's set default to 128 and allowing to be overwritten if
+ * needed.
+ */
+#ifndef MAX_SATA_BLOCKS_READ_WRITE
+#define MAX_SATA_BLOCKS_READ_WRITE 0x80
+#endif
-static inline u32 ahci_port_base(u32 base, u32 port)
+/* Maximum timeouts for each event */
+#define WAIT_MS_SPINUP 20000
+#define WAIT_MS_DATAIO 10000
+#define WAIT_MS_FLUSH 5000
+#define WAIT_MS_LINKUP 200
+
+static inline void __iomem *ahci_port_base(void __iomem *base, u32 port)
{
return base + 0x100 + (port * 0x80);
}
-static void ahci_setup_port(struct ahci_ioports *port, unsigned long base,
+static void ahci_setup_port(struct ahci_ioports *port, void __iomem *base,
unsigned int port_idx)
{
base = ahci_port_base(base, port_idx);
#define msleep(a) udelay(a * 1000)
-#define ssleep(a) msleep(a * 1000)
-static int waiting_for_cmd_completed(volatile u8 *offset,
+static void ahci_dcache_flush_range(unsigned long begin, unsigned long len)
+{
+ const unsigned long start = begin;
+ const unsigned long end = start + len;
+
+ debug("%s: flush dcache: [%#lx, %#lx)\n", __func__, start, end);
+ flush_dcache_range(start, end);
+}
+
+/*
+ * SATA controller DMAs to physical RAM. Ensure data from the
+ * controller is invalidated from dcache; next access comes from
+ * physical RAM.
+ */
+static void ahci_dcache_invalidate_range(unsigned long begin, unsigned long len)
+{
+ const unsigned long start = begin;
+ const unsigned long end = start + len;
+
+ debug("%s: invalidate dcache: [%#lx, %#lx)\n", __func__, start, end);
+ invalidate_dcache_range(start, end);
+}
+
+/*
+ * Ensure data for SATA controller is flushed out of dcache and
+ * written to physical memory.
+ */
+static void ahci_dcache_flush_sata_cmd(struct ahci_ioports *pp)
+{
+ ahci_dcache_flush_range((unsigned long)pp->cmd_slot,
+ AHCI_PORT_PRIV_DMA_SZ);
+}
+
+static int waiting_for_cmd_completed(void __iomem *offset,
int timeout_msec,
u32 sign)
{
return (i < timeout_msec) ? 0 : -1;
}
+int __weak ahci_link_up(struct ahci_probe_ent *probe_ent, u8 port)
+{
+ u32 tmp;
+ int j = 0;
+ void __iomem *port_mmio = probe_ent->port[port].port_mmio;
-static int ahci_host_init(struct ahci_probe_ent *probe_ent)
+ /*
+ * Bring up SATA link.
+ * SATA link bringup time is usually less than 1 ms; only very
+ * rarely has it taken between 1-2 ms. Never seen it above 2 ms.
+ */
+ while (j < WAIT_MS_LINKUP) {
+ tmp = readl(port_mmio + PORT_SCR_STAT);
+ tmp &= PORT_SCR_STAT_DET_MASK;
+ if (tmp == PORT_SCR_STAT_DET_PHYRDY)
+ return 0;
+ udelay(1000);
+ j++;
+ }
+ return 1;
+}
+
+#ifdef CONFIG_SUNXI_AHCI
+/* The sunxi AHCI controller requires this undocumented setup */
+static void sunxi_dma_init(void __iomem *port_mmio)
{
- pci_dev_t pdev = probe_ent->dev;
- volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
- u32 tmp, cap_save;
- u16 tmp16;
- int i, j;
- volatile u8 *port_mmio;
- unsigned short vendor;
+ clrsetbits_le32(port_mmio + PORT_P0DMACR, 0x0000ff00, 0x00004400);
+}
+#endif
- cap_save = readl(mmio + HOST_CAP);
- cap_save &= ((1 << 28) | (1 << 17));
- cap_save |= (1 << 27);
+int ahci_reset(void __iomem *base)
+{
+ int i = 1000;
+ u32 __iomem *host_ctl_reg = base + HOST_CTL;
+ u32 tmp = readl(host_ctl_reg); /* global controller reset */
- /* global controller reset */
- tmp = readl(mmio + HOST_CTL);
if ((tmp & HOST_RESET) == 0)
- writel_with_flush(tmp | HOST_RESET, mmio + HOST_CTL);
+ writel_with_flush(tmp | HOST_RESET, host_ctl_reg);
- /* reset must complete within 1 second, or
+ /*
+ * reset must complete within 1 second, or
* the hardware should be considered fried.
*/
- ssleep(1);
-
- tmp = readl(mmio + HOST_CTL);
- if (tmp & HOST_RESET) {
- debug("controller reset failed (0x%x)\n", tmp);
+ do {
+ udelay(1000);
+ tmp = readl(host_ctl_reg);
+ i--;
+ } while ((i > 0) && (tmp & HOST_RESET));
+
+ if (i == 0) {
+ printf("controller reset failed (0x%x)\n", tmp);
return -1;
}
+ return 0;
+}
+
+static int ahci_host_init(struct ahci_probe_ent *probe_ent)
+{
+#ifndef CONFIG_SCSI_AHCI_PLAT
+ pci_dev_t pdev = probe_ent->dev;
+ u16 tmp16;
+ unsigned short vendor;
+#endif
+ void __iomem *mmio = probe_ent->mmio_base;
+ u32 tmp, cap_save, cmd;
+ int i, j, ret;
+ void __iomem *port_mmio;
+ u32 port_map;
+
+ debug("ahci_host_init: start\n");
+
+ cap_save = readl(mmio + HOST_CAP);
+ cap_save &= ((1 << 28) | (1 << 17));
+ cap_save |= (1 << 27); /* Staggered Spin-up. Not needed. */
+
+ ret = ahci_reset(probe_ent->mmio_base);
+ if (ret)
+ return ret;
+
writel_with_flush(HOST_AHCI_EN, mmio + HOST_CTL);
writel(cap_save, mmio + HOST_CAP);
writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
+#ifndef CONFIG_SCSI_AHCI_PLAT
pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
if (vendor == PCI_VENDOR_ID_INTEL) {
tmp16 |= 0xf;
pci_write_config_word(pdev, 0x92, tmp16);
}
-
+#endif
probe_ent->cap = readl(mmio + HOST_CAP);
probe_ent->port_map = readl(mmio + HOST_PORTS_IMPL);
+ port_map = probe_ent->port_map;
probe_ent->n_ports = (probe_ent->cap & 0x1f) + 1;
debug("cap 0x%x port_map 0x%x n_ports %d\n",
probe_ent->cap, probe_ent->port_map, probe_ent->n_ports);
+ if (probe_ent->n_ports > CONFIG_SYS_SCSI_MAX_SCSI_ID)
+ probe_ent->n_ports = CONFIG_SYS_SCSI_MAX_SCSI_ID;
+
for (i = 0; i < probe_ent->n_ports; i++) {
- probe_ent->port[i].port_mmio = ahci_port_base((u32) mmio, i);
+ if (!(port_map & (1 << i)))
+ continue;
+ probe_ent->port[i].port_mmio = ahci_port_base(mmio, i);
port_mmio = (u8 *) probe_ent->port[i].port_mmio;
- ahci_setup_port(&probe_ent->port[i], (unsigned long)mmio, i);
+ ahci_setup_port(&probe_ent->port[i], mmio, i);
/* make sure port is not active */
tmp = readl(port_mmio + PORT_CMD);
if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
PORT_CMD_FIS_RX | PORT_CMD_START)) {
+ debug("Port %d is active. Deactivating.\n", i);
tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
PORT_CMD_FIS_RX | PORT_CMD_START);
writel_with_flush(tmp, port_mmio + PORT_CMD);
msleep(500);
}
- writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD);
+#ifdef CONFIG_SUNXI_AHCI
+ sunxi_dma_init(port_mmio);
+#endif
+
+ /* Add the spinup command to whatever mode bits may
+ * already be on in the command register.
+ */
+ cmd = readl(port_mmio + PORT_CMD);
+ cmd |= PORT_CMD_SPIN_UP;
+ writel_with_flush(cmd, port_mmio + PORT_CMD);
+
+ /* Bring up SATA link. */
+ ret = ahci_link_up(probe_ent, i);
+ if (ret) {
+ printf("SATA link %d timeout.\n", i);
+ continue;
+ } else {
+ debug("SATA link ok.\n");
+ }
+
+ /* Clear error status */
+ tmp = readl(port_mmio + PORT_SCR_ERR);
+ if (tmp)
+ writel(tmp, port_mmio + PORT_SCR_ERR);
+
+ debug("Spinning up device on SATA port %d... ", i);
j = 0;
- while (j < 100) {
- msleep(10);
+ while (j < WAIT_MS_SPINUP) {
+ tmp = readl(port_mmio + PORT_TFDATA);
+ if (!(tmp & (ATA_BUSY | ATA_DRQ)))
+ break;
+ udelay(1000);
tmp = readl(port_mmio + PORT_SCR_STAT);
- if ((tmp & 0xf) == 0x3)
+ tmp &= PORT_SCR_STAT_DET_MASK;
+ if (tmp == PORT_SCR_STAT_DET_PHYRDY)
break;
j++;
}
+ tmp = readl(port_mmio + PORT_SCR_STAT) & PORT_SCR_STAT_DET_MASK;
+ if (tmp == PORT_SCR_STAT_DET_COMINIT) {
+ debug("SATA link %d down (COMINIT received), retrying...\n", i);
+ i--;
+ continue;
+ }
+
+ printf("Target spinup took %d ms.\n", j);
+ if (j == WAIT_MS_SPINUP)
+ debug("timeout.\n");
+ else
+ debug("ok.\n");
+
tmp = readl(port_mmio + PORT_SCR_ERR);
debug("PORT_SCR_ERR 0x%x\n", tmp);
writel(tmp, port_mmio + PORT_SCR_ERR);
writel(1 << i, mmio + HOST_IRQ_STAT);
- /* set irq mask (enables interrupts) */
- writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
-
- /*register linkup ports */
+ /* register linkup ports */
tmp = readl(port_mmio + PORT_SCR_STAT);
- debug("Port %d status: 0x%x\n", i, tmp);
- if ((tmp & 0xf) == 0x03)
+ debug("SATA port %d status: 0x%x\n", i, tmp);
+ if ((tmp & PORT_SCR_STAT_DET_MASK) == PORT_SCR_STAT_DET_PHYRDY)
probe_ent->link_port_map |= (0x01 << i);
}
writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
tmp = readl(mmio + HOST_CTL);
debug("HOST_CTL 0x%x\n", tmp);
-
+#ifndef CONFIG_SCSI_AHCI_PLAT
pci_read_config_word(pdev, PCI_COMMAND, &tmp16);
tmp |= PCI_COMMAND_MASTER;
pci_write_config_word(pdev, PCI_COMMAND, tmp16);
-
+#endif
return 0;
}
static void ahci_print_info(struct ahci_probe_ent *probe_ent)
{
+#ifndef CONFIG_SCSI_AHCI_PLAT
pci_dev_t pdev = probe_ent->dev;
- volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
- u32 vers, cap, impl, speed;
- const char *speed_s;
u16 cc;
+#endif
+ void __iomem *mmio = probe_ent->mmio_base;
+ u32 vers, cap, cap2, impl, speed;
+ const char *speed_s;
const char *scc_s;
vers = readl(mmio + HOST_VERSION);
cap = probe_ent->cap;
+ cap2 = readl(mmio + HOST_CAP2);
impl = probe_ent->port_map;
speed = (cap >> 20) & 0xf;
speed_s = "1.5";
else if (speed == 2)
speed_s = "3";
+ else if (speed == 3)
+ speed_s = "6";
else
speed_s = "?";
+#ifdef CONFIG_SCSI_AHCI_PLAT
+ scc_s = "SATA";
+#else
pci_read_config_word(pdev, 0x0a, &cc);
if (cc == 0x0101)
scc_s = "IDE";
scc_s = "RAID";
else
scc_s = "unknown";
-
+#endif
printf("AHCI %02x%02x.%02x%02x "
"%u slots %u ports %s Gbps 0x%x impl %s mode\n",
(vers >> 24) & 0xff,
((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s);
printf("flags: "
- "%s%s%s%s%s%s"
- "%s%s%s%s%s%s%s\n",
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s\n",
cap & (1 << 31) ? "64bit " : "",
cap & (1 << 30) ? "ncq " : "",
cap & (1 << 28) ? "ilck " : "",
cap & (1 << 19) ? "nz " : "",
cap & (1 << 18) ? "only " : "",
cap & (1 << 17) ? "pmp " : "",
+ cap & (1 << 16) ? "fbss " : "",
cap & (1 << 15) ? "pio " : "",
cap & (1 << 14) ? "slum " : "",
- cap & (1 << 13) ? "part " : "");
+ cap & (1 << 13) ? "part " : "",
+ cap & (1 << 7) ? "ccc " : "",
+ cap & (1 << 6) ? "ems " : "",
+ cap & (1 << 5) ? "sxs " : "",
+ cap2 & (1 << 2) ? "apst " : "",
+ cap2 & (1 << 1) ? "nvmp " : "",
+ cap2 & (1 << 0) ? "boh " : "");
}
+#ifndef CONFIG_SCSI_AHCI_PLAT
static int ahci_init_one(pci_dev_t pdev)
{
u16 vendor;
int rc;
- memset((void *)ataid, 0, sizeof(hd_driveid_t *) * AHCI_MAX_PORTS);
-
probe_ent = malloc(sizeof(struct ahci_probe_ent));
+ if (!probe_ent) {
+ printf("%s: No memory for probe_ent\n", __func__);
+ return -ENOMEM;
+ }
+
memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
probe_ent->dev = pdev;
probe_ent->pio_mask = 0x1f;
probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
- probe_ent->mmio_base = (u32)pci_map_bar(pdev, AHCI_PCI_BAR,
- PCI_REGION_MEM);
+ probe_ent->mmio_base = pci_map_bar(pdev, PCI_BASE_ADDRESS_5,
+ PCI_REGION_MEM);
+ debug("ahci mmio_base=0x%p\n", probe_ent->mmio_base);
/* Take from kernel:
* JMicron-specific fixup:
err_out:
return rc;
}
-
+#endif
#define MAX_DATA_BYTE_COUNT (4*1024*1024)
for (i = 0; i < sg_count; i++) {
ahci_sg->addr =
- cpu_to_le32((u32) buf + i * MAX_DATA_BYTE_COUNT);
+ cpu_to_le32((unsigned long) buf + i * MAX_DATA_BYTE_COUNT);
ahci_sg->addr_hi = 0;
ahci_sg->flags_size = cpu_to_le32(0x3fffff &
(buf_len < MAX_DATA_BYTE_COUNT
{
pp->cmd_slot->opts = cpu_to_le32(opts);
pp->cmd_slot->status = 0;
- pp->cmd_slot->tbl_addr = cpu_to_le32(pp->cmd_tbl & 0xffffffff);
- pp->cmd_slot->tbl_addr_hi = 0;
+ pp->cmd_slot->tbl_addr = cpu_to_le32((u32)pp->cmd_tbl & 0xffffffff);
+#ifdef CONFIG_PHYS_64BIT
+ pp->cmd_slot->tbl_addr_hi =
+ cpu_to_le32((u32)(((pp->cmd_tbl) >> 16) >> 16));
+#endif
}
+#ifdef CONFIG_AHCI_SETFEATURES_XFER
static void ahci_set_feature(u8 port)
{
struct ahci_ioports *pp = &(probe_ent->port[port]);
- volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
+ void __iomem *port_mmio = pp->port_mmio;
u32 cmd_fis_len = 5; /* five dwords */
u8 fis[20];
- /*set feature */
- memset(fis, 0, 20);
+ /* set feature */
+ memset(fis, 0, sizeof(fis));
fis[0] = 0x27;
fis[1] = 1 << 7;
- fis[2] = ATA_CMD_SETF;
+ fis[2] = ATA_CMD_SET_FEATURES;
fis[3] = SETFEATURES_XFER;
fis[12] = __ilog2(probe_ent->udma_mask + 1) + 0x40 - 0x01;
- memcpy((unsigned char *)pp->cmd_tbl, fis, 20);
+ memcpy((unsigned char *)pp->cmd_tbl, fis, sizeof(fis));
ahci_fill_cmd_slot(pp, cmd_fis_len);
+ ahci_dcache_flush_sata_cmd(pp);
writel(1, port_mmio + PORT_CMD_ISSUE);
readl(port_mmio + PORT_CMD_ISSUE);
- if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) {
- printf("set feature error!\n");
+ if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
+ WAIT_MS_DATAIO, 0x1)) {
+ printf("set feature error on port %d!\n", port);
}
}
+#endif
+
+static int wait_spinup(void __iomem *port_mmio)
+{
+ ulong start;
+ u32 tf_data;
+ start = get_timer(0);
+ do {
+ tf_data = readl(port_mmio + PORT_TFDATA);
+ if (!(tf_data & ATA_BUSY))
+ return 0;
+ } while (get_timer(start) < WAIT_MS_SPINUP);
+
+ return -ETIMEDOUT;
+}
static int ahci_port_start(u8 port)
{
struct ahci_ioports *pp = &(probe_ent->port[port]);
- volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
+ void __iomem *port_mmio = pp->port_mmio;
u32 port_status;
- u32 mem;
+ void __iomem *mem;
debug("Enter start port: %d\n", port);
port_status = readl(port_mmio + PORT_SCR_STAT);
return -1;
}
- mem = (u32) malloc(AHCI_PORT_PRIV_DMA_SZ + 2048);
+ mem = malloc(AHCI_PORT_PRIV_DMA_SZ + 2048);
if (!mem) {
free(pp);
- printf("No mem for table!\n");
+ printf("%s: No mem for table!\n", __func__);
return -ENOMEM;
}
- mem = (mem + 0x800) & (~0x7ff); /* Aligned to 2048-bytes */
- memset((u8 *) mem, 0, AHCI_PORT_PRIV_DMA_SZ);
+ /* Aligned to 2048-bytes */
+ mem = memalign(2048, AHCI_PORT_PRIV_DMA_SZ);
+ memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
/*
* First item in chunk of DMA memory: 32-slot command table,
* 32 bytes each in size
*/
- pp->cmd_slot = (struct ahci_cmd_hdr *)mem;
- debug("cmd_slot = 0x%x\n", pp->cmd_slot);
+ pp->cmd_slot =
+ (struct ahci_cmd_hdr *)(uintptr_t)virt_to_phys((void *)mem);
+ debug("cmd_slot = %p\n", pp->cmd_slot);
mem += (AHCI_CMD_SLOT_SZ + 224);
/*
* Second item: Received-FIS area
*/
- pp->rx_fis = mem;
+ pp->rx_fis = virt_to_phys((void *)mem);
mem += AHCI_RX_FIS_SZ;
/*
* Third item: data area for storing a single command
* and its scatter-gather table
*/
- pp->cmd_tbl = mem;
- debug("cmd_tbl_dma = 0x%x\n", pp->cmd_tbl);
+ pp->cmd_tbl = virt_to_phys((void *)mem);
+ debug("cmd_tbl_dma = %lx\n", pp->cmd_tbl);
mem += AHCI_CMD_TBL_HDR;
- pp->cmd_tbl_sg = (struct ahci_sg *)mem;
+ pp->cmd_tbl_sg =
+ (struct ahci_sg *)(uintptr_t)virt_to_phys((void *)mem);
- writel_with_flush((u32) pp->cmd_slot, port_mmio + PORT_LST_ADDR);
+ writel_with_flush((unsigned long)pp->cmd_slot,
+ port_mmio + PORT_LST_ADDR);
writel_with_flush(pp->rx_fis, port_mmio + PORT_FIS_ADDR);
+#ifdef CONFIG_SUNXI_AHCI
+ sunxi_dma_init(port_mmio);
+#endif
+
writel_with_flush(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
PORT_CMD_START, port_mmio + PORT_CMD);
debug("Exit start port %d\n", port);
- return 0;
+ /*
+ * Make sure interface is not busy based on error and status
+ * information from task file data register before proceeding
+ */
+ return wait_spinup(port_mmio);
}
-static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf,
- int buf_len)
+static int ahci_device_data_io(u8 port, u8 *fis, int fis_len, u8 *buf,
+ int buf_len, u8 is_write)
{
struct ahci_ioports *pp = &(probe_ent->port[port]);
- volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
+ void __iomem *port_mmio = pp->port_mmio;
u32 opts;
u32 port_status;
int sg_count;
- debug("Enter get_ahci_device_data: for port %d\n", port);
+ debug("Enter %s: for port %d\n", __func__, port);
if (port > probe_ent->n_ports) {
- printf("Invaild port number %d\n", port);
+ printf("Invalid port number %d\n", port);
return -1;
}
memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len);
sg_count = ahci_fill_sg(port, buf, buf_len);
- opts = (fis_len >> 2) | (sg_count << 16);
+ opts = (fis_len >> 2) | (sg_count << 16) | (is_write << 6);
ahci_fill_cmd_slot(pp, opts);
+ ahci_dcache_flush_sata_cmd(pp);
+ ahci_dcache_flush_range((unsigned long)buf, (unsigned long)buf_len);
+
writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
- if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) {
+ if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
+ WAIT_MS_DATAIO, 0x1)) {
printf("timeout exit!\n");
return -1;
}
- debug("get_ahci_device_data: %d byte transferred.\n",
- pp->cmd_slot->status);
+
+ ahci_dcache_invalidate_range((unsigned long)buf,
+ (unsigned long)buf_len);
+ debug("%s: %d byte transferred.\n", __func__, pp->cmd_slot->status);
return 0;
}
{
int i;
for (i = 0; i < len / 2; i++)
- target[i] = le16_to_cpu(src[i]);
+ target[i] = swab16(src[i]);
return (char *)target;
}
-
-static void dump_ataid(hd_driveid_t *ataid)
-{
- debug("(49)ataid->capability = 0x%x\n", ataid->capability);
- debug("(53)ataid->field_valid =0x%x\n", ataid->field_valid);
- debug("(63)ataid->dma_mword = 0x%x\n", ataid->dma_mword);
- debug("(64)ataid->eide_pio_modes = 0x%x\n", ataid->eide_pio_modes);
- debug("(75)ataid->queue_depth = 0x%x\n", ataid->queue_depth);
- debug("(80)ataid->major_rev_num = 0x%x\n", ataid->major_rev_num);
- debug("(81)ataid->minor_rev_num = 0x%x\n", ataid->minor_rev_num);
- debug("(82)ataid->command_set_1 = 0x%x\n", ataid->command_set_1);
- debug("(83)ataid->command_set_2 = 0x%x\n", ataid->command_set_2);
- debug("(84)ataid->cfsse = 0x%x\n", ataid->cfsse);
- debug("(85)ataid->cfs_enable_1 = 0x%x\n", ataid->cfs_enable_1);
- debug("(86)ataid->cfs_enable_2 = 0x%x\n", ataid->cfs_enable_2);
- debug("(87)ataid->csf_default = 0x%x\n", ataid->csf_default);
- debug("(88)ataid->dma_ultra = 0x%x\n", ataid->dma_ultra);
- debug("(93)ataid->hw_config = 0x%x\n", ataid->hw_config);
-}
-
-
/*
* SCSI INQUIRY command operation.
*/
static int ata_scsiop_inquiry(ccb *pccb)
{
- u8 hdr[] = {
+ static const u8 hdr[] = {
0,
0,
0x5, /* claim SPC-3 version compatibility */
95 - 4,
};
u8 fis[20];
- u8 *tmpid;
+ u16 *idbuf;
+ ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS);
u8 port;
/* Clean ccb data buffer */
if (pccb->datalen <= 35)
return 0;
- memset(fis, 0, 20);
+ memset(fis, 0, sizeof(fis));
/* Construct the FIS */
fis[0] = 0x27; /* Host to device FIS. */
fis[1] = 1 << 7; /* Command FIS. */
- fis[2] = ATA_CMD_IDENT; /* Command byte. */
+ fis[2] = ATA_CMD_ID_ATA; /* Command byte. */
/* Read id from sata */
port = pccb->target;
- if (!(tmpid = malloc(sizeof(hd_driveid_t))))
- return -ENOMEM;
- if (get_ahci_device_data(port, (u8 *) & fis, 20,
- tmpid, sizeof(hd_driveid_t))) {
+ if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), (u8 *)tmpid,
+ ATA_ID_WORDS * 2, 0)) {
debug("scsi_ahci: SCSI inquiry command failure.\n");
return -EIO;
}
- if (ataid[port])
- free(ataid[port]);
- ataid[port] = (hd_driveid_t *) tmpid;
+ if (!ataid[port]) {
+ ataid[port] = malloc(ATA_ID_WORDS * 2);
+ if (!ataid[port]) {
+ printf("%s: No memory for ataid[port]\n", __func__);
+ return -ENOMEM;
+ }
+ }
+
+ idbuf = ataid[port];
+
+ memcpy(idbuf, tmpid, ATA_ID_WORDS * 2);
+ ata_swap_buf_le16(idbuf, ATA_ID_WORDS);
memcpy(&pccb->pdata[8], "ATA ", 8);
- ata_id_strcpy((u16 *) &pccb->pdata[16], (u16 *)ataid[port]->model, 16);
- ata_id_strcpy((u16 *) &pccb->pdata[32], (u16 *)ataid[port]->fw_rev, 4);
+ ata_id_strcpy((u16 *)&pccb->pdata[16], &idbuf[ATA_ID_PROD], 16);
+ ata_id_strcpy((u16 *)&pccb->pdata[32], &idbuf[ATA_ID_FW_REV], 4);
- dump_ataid(ataid[port]);
+#ifdef DEBUG
+ ata_dump_id(idbuf);
+#endif
return 0;
}
/*
- * SCSI READ10 command operation.
+ * SCSI READ10/WRITE10 command operation.
*/
-static int ata_scsiop_read10(ccb * pccb)
+static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
{
- u64 lba = 0;
- u32 len = 0;
+ lbaint_t lba = 0;
+ u16 blocks = 0;
u8 fis[20];
+ u8 *user_buffer = pccb->pdata;
+ u32 user_buffer_size = pccb->datalen;
+
+ /* Retrieve the base LBA number from the ccb structure. */
+ if (pccb->cmd[0] == SCSI_READ16) {
+ memcpy(&lba, pccb->cmd + 2, 8);
+ lba = be64_to_cpu(lba);
+ } else {
+ u32 temp;
+ memcpy(&temp, pccb->cmd + 2, 4);
+ lba = be32_to_cpu(temp);
+ }
- lba = (((u64) pccb->cmd[2]) << 24) | (((u64) pccb->cmd[3]) << 16)
- | (((u64) pccb->cmd[4]) << 8) | ((u64) pccb->cmd[5]);
- len = (((u32) pccb->cmd[7]) << 8) | ((u32) pccb->cmd[8]);
-
- /* For 10-byte and 16-byte SCSI R/W commands, transfer
+ /*
+ * Retrieve the base LBA number and the block count from
+ * the ccb structure.
+ *
+ * For 10-byte and 16-byte SCSI R/W commands, transfer
* length 0 means transfer 0 block of data.
* However, for ATA R/W commands, sector count 0 means
* 256 or 65536 sectors, not 0 sectors as in SCSI.
*
* WARNING: one or two older ATA drives treat 0 as 0...
*/
- if (!len)
- return 0;
- memset(fis, 0, 20);
+ if (pccb->cmd[0] == SCSI_READ16)
+ blocks = (((u16)pccb->cmd[13]) << 8) | ((u16) pccb->cmd[14]);
+ else
+ blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]);
- /* Construct the FIS */
- fis[0] = 0x27; /* Host to device FIS. */
- fis[1] = 1 << 7; /* Command FIS. */
- fis[2] = ATA_CMD_RD_DMA; /* Command byte. */
-
- /* LBA address, only support LBA28 in this driver */
- fis[4] = pccb->cmd[5];
- fis[5] = pccb->cmd[4];
- fis[6] = pccb->cmd[3];
- fis[7] = (pccb->cmd[2] & 0x0f) | 0xe0;
-
- /* Sector Count */
- fis[12] = pccb->cmd[8];
- fis[13] = pccb->cmd[7];
-
- /* Read from ahci */
- if (get_ahci_device_data(pccb->target, (u8 *) & fis, 20,
- pccb->pdata, pccb->datalen)) {
- debug("scsi_ahci: SCSI READ10 command failure.\n");
- return -EIO;
+ debug("scsi_ahci: %s %u blocks starting from lba 0x" LBAFU "\n",
+ is_write ? "write" : "read", blocks, lba);
+
+ /* Preset the FIS */
+ memset(fis, 0, sizeof(fis));
+ fis[0] = 0x27; /* Host to device FIS. */
+ fis[1] = 1 << 7; /* Command FIS. */
+ /* Command byte (read/write). */
+ fis[2] = is_write ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT;
+
+ while (blocks) {
+ u16 now_blocks; /* number of blocks per iteration */
+ u32 transfer_size; /* number of bytes per iteration */
+
+ now_blocks = min((u16)MAX_SATA_BLOCKS_READ_WRITE, blocks);
+
+ transfer_size = ATA_SECT_SIZE * now_blocks;
+ if (transfer_size > user_buffer_size) {
+ printf("scsi_ahci: Error: buffer too small.\n");
+ return -EIO;
+ }
+
+ /*
+ * LBA48 SATA command but only use 32bit address range within
+ * that (unless we've enabled 64bit LBA support). The next
+ * smaller command range (28bit) is too small.
+ */
+ fis[4] = (lba >> 0) & 0xff;
+ fis[5] = (lba >> 8) & 0xff;
+ fis[6] = (lba >> 16) & 0xff;
+ fis[7] = 1 << 6; /* device reg: set LBA mode */
+ fis[8] = ((lba >> 24) & 0xff);
+#ifdef CONFIG_SYS_64BIT_LBA
+ if (pccb->cmd[0] == SCSI_READ16) {
+ fis[9] = ((lba >> 32) & 0xff);
+ fis[10] = ((lba >> 40) & 0xff);
+ }
+#endif
+
+ fis[3] = 0xe0; /* features */
+
+ /* Block (sector) count */
+ fis[12] = (now_blocks >> 0) & 0xff;
+ fis[13] = (now_blocks >> 8) & 0xff;
+
+ /* Read/Write from ahci */
+ if (ahci_device_data_io(pccb->target, (u8 *) &fis, sizeof(fis),
+ user_buffer, transfer_size,
+ is_write)) {
+ debug("scsi_ahci: SCSI %s10 command failure.\n",
+ is_write ? "WRITE" : "READ");
+ return -EIO;
+ }
+
+ /* If this transaction is a write, do a following flush.
+ * Writes in u-boot are so rare, and the logic to know when is
+ * the last write and do a flush only there is sufficiently
+ * difficult. Just do a flush after every write. This incurs,
+ * usually, one extra flush when the rare writes do happen.
+ */
+ if (is_write) {
+ if (-EIO == ata_io_flush(pccb->target))
+ return -EIO;
+ }
+ user_buffer += transfer_size;
+ user_buffer_size -= transfer_size;
+ blocks -= now_blocks;
+ lba += now_blocks;
}
return 0;
static int ata_scsiop_read_capacity10(ccb *pccb)
{
u32 cap;
+ u64 cap64;
+ u32 block_size;
if (!ataid[pccb->target]) {
printf("scsi_ahci: SCSI READ CAPACITY10 command failure. "
return -EPERM;
}
- cap = le32_to_cpu(ataid[pccb->target]->lba_capacity);
+ cap64 = ata_id_n_sectors(ataid[pccb->target]);
+ if (cap64 > 0x100000000ULL)
+ cap64 = 0xffffffff;
+
+ cap = cpu_to_be32(cap64);
+ memcpy(pccb->pdata, &cap, sizeof(cap));
+
+ block_size = cpu_to_be32((u32)512);
+ memcpy(&pccb->pdata[4], &block_size, 4);
+
+ return 0;
+}
+
+
+/*
+ * SCSI READ CAPACITY16 command operation.
+ */
+static int ata_scsiop_read_capacity16(ccb *pccb)
+{
+ u64 cap;
+ u64 block_size;
+
+ if (!ataid[pccb->target]) {
+ printf("scsi_ahci: SCSI READ CAPACITY16 command failure. "
+ "\tNo ATA info!\n"
+ "\tPlease run SCSI commmand INQUIRY firstly!\n");
+ return -EPERM;
+ }
+
+ cap = ata_id_n_sectors(ataid[pccb->target]);
+ cap = cpu_to_be64(cap);
memcpy(pccb->pdata, &cap, sizeof(cap));
- pccb->pdata[4] = pccb->pdata[5] = 0;
- pccb->pdata[6] = 512 >> 8;
- pccb->pdata[7] = 512 & 0xff;
+ block_size = cpu_to_be64((u64)512);
+ memcpy(&pccb->pdata[8], &block_size, 8);
return 0;
}
int ret;
switch (pccb->cmd[0]) {
+ case SCSI_READ16:
case SCSI_READ10:
- ret = ata_scsiop_read10(pccb);
+ ret = ata_scsiop_read_write(pccb, 0);
break;
- case SCSI_RD_CAPAC:
+ case SCSI_WRITE10:
+ ret = ata_scsiop_read_write(pccb, 1);
+ break;
+ case SCSI_RD_CAPAC10:
ret = ata_scsiop_read_capacity10(pccb);
break;
+ case SCSI_RD_CAPAC16:
+ ret = ata_scsiop_read_capacity16(pccb);
+ break;
case SCSI_TST_U_RDY:
ret = ata_scsiop_test_unit_ready(pccb);
break;
break;
default:
printf("Unsupport SCSI command 0x%02x\n", pccb->cmd[0]);
- return FALSE;
+ return false;
}
if (ret) {
debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0], ret);
- return FALSE;
+ return false;
}
- return TRUE;
+ return true;
}
int i;
u32 linkmap;
+#ifndef CONFIG_SCSI_AHCI_PLAT
ahci_init_one(busdevfunc);
+#endif
+
+ linkmap = probe_ent->link_port_map;
+
+ for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
+ if (((linkmap >> i) & 0x01)) {
+ if (ahci_port_start((u8) i)) {
+ printf("Can not start port %d\n", i);
+ continue;
+ }
+#ifdef CONFIG_AHCI_SETFEATURES_XFER
+ ahci_set_feature((u8) i);
+#endif
+ }
+ }
+}
+
+#ifdef CONFIG_SCSI_AHCI_PLAT
+int ahci_init(void __iomem *base)
+{
+ int i, rc = 0;
+ u32 linkmap;
+
+ probe_ent = malloc(sizeof(struct ahci_probe_ent));
+ if (!probe_ent) {
+ printf("%s: No memory for probe_ent\n", __func__);
+ return -ENOMEM;
+ }
+
+ memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
+
+ probe_ent->host_flags = ATA_FLAG_SATA
+ | ATA_FLAG_NO_LEGACY
+ | ATA_FLAG_MMIO
+ | ATA_FLAG_PIO_DMA
+ | ATA_FLAG_NO_ATAPI;
+ probe_ent->pio_mask = 0x1f;
+ probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
+
+ probe_ent->mmio_base = base;
+
+ /* initialize adapter */
+ rc = ahci_host_init(probe_ent);
+ if (rc)
+ goto err_out;
+
+ ahci_print_info(probe_ent);
linkmap = probe_ent->link_port_map;
printf("Can not start port %d\n", i);
continue;
}
+#ifdef CONFIG_AHCI_SETFEATURES_XFER
ahci_set_feature((u8) i);
+#endif
}
}
+err_out:
+ return rc;
}
+void __weak scsi_init(void)
+{
+}
-void scsi_bus_reset(void)
+#endif
+
+/*
+ * In the general case of generic rotating media it makes sense to have a
+ * flush capability. It probably even makes sense in the case of SSDs because
+ * one cannot always know for sure what kind of internal cache/flush mechanism
+ * is embodied therein. At first it was planned to invoke this after the last
+ * write to disk and before rebooting. In practice, knowing, a priori, which
+ * is the last write is difficult. Because writing to the disk in u-boot is
+ * very rare, this flush command will be invoked after every block write.
+ */
+static int ata_io_flush(u8 port)
{
- /*Not implement*/
+ u8 fis[20];
+ struct ahci_ioports *pp = &(probe_ent->port[port]);
+ void __iomem *port_mmio = pp->port_mmio;
+ u32 cmd_fis_len = 5; /* five dwords */
+
+ /* Preset the FIS */
+ memset(fis, 0, 20);
+ fis[0] = 0x27; /* Host to device FIS. */
+ fis[1] = 1 << 7; /* Command FIS. */
+ fis[2] = ATA_CMD_FLUSH_EXT;
+
+ memcpy((unsigned char *)pp->cmd_tbl, fis, 20);
+ ahci_fill_cmd_slot(pp, cmd_fis_len);
+ writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
+
+ if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
+ WAIT_MS_FLUSH, 0x1)) {
+ debug("scsi_ahci: flush command timeout on port %d.\n", port);
+ return -EIO;
+ }
+
+ return 0;
}
+__weak void scsi_bus_reset(void)
+{
+ /*Not implement*/
+}
+
void scsi_print_error(ccb * pccb)
{
/*The ahci error info can be read in the ahci driver*/