/****************************************************************************
*
-* Video BOOT Graphics Card POST Module
+* Video BOOT Graphics Card POST Module
*
* ========================================================================
-* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+* Copyright (C) 2007 Freescale Semiconductor, Inc.
* Jason Jin <Jason.jin@freescale.com>
*
* Copyright (C) 1991-2004 SciTech Software, Inc. All rights reserved.
*
* ========================================================================
*
-* Language: ANSI C
-* Environment: Linux Kernel
-* Developer: Kendall Bennett
+* Language: ANSI C
+* Environment: Linux Kernel
+* Developer: Kendall Bennett
*
-* Description: Module to implement booting PCI/AGP controllers on the
-* bus. We use the x86 real mode emulator to run the BIOS on
-* graphics controllers to bring the cards up.
+* Description: Module to implement booting PCI/AGP controllers on the
+* bus. We use the x86 real mode emulator to run the BIOS on
+* graphics controllers to bring the cards up.
*
-* Note that at present this module does *not* support
-* multiple controllers.
+* Note that at present this module does *not* support
+* multiple controllers.
*
-* The orignal name of this file is warmboot.c.
-* Jason ported this file to u-boot to run the ATI video card
-* BIOS in u-boot.
+* The orignal name of this file is warmboot.c.
+* Jason ported this file to u-boot to run the ATI video card
+* BIOS in u-boot.
****************************************************************************/
#include <common.h>
-
-#ifdef CONFIG_BIOSEMU
-
-#include "biosemui.h"
+#include <bios_emul.h>
+#include <errno.h>
#include <malloc.h>
+#include <vbe.h>
+#include "biosemui.h"
/* Length of the BIOS image */
-#define MAX_BIOSLEN (128 * 1024L)
-
-/* Define some useful types and macros */
-#define true 1
-#define false 0
+#define MAX_BIOSLEN (128 * 1024L)
/* Place to save PCI BAR's that we change and later restore */
static u32 saveROMBaseAddress;
static u32 saveBaseAddress18;
static u32 saveBaseAddress20;
+/* Addres im memory of VBE region */
+const int vbe_offset = 0x2000;
+
+#ifdef CONFIG_FRAMEBUFFER_SET_VESA_MODE
+static const void *bios_ptr(const void *buf, BE_VGAInfo *vga_info,
+ u32 x86_dword_ptr)
+{
+ u32 seg_ofs, flat;
+
+ seg_ofs = le32_to_cpu(x86_dword_ptr);
+ flat = ((seg_ofs & 0xffff0000) >> 12) | (seg_ofs & 0xffff);
+ if (flat >= 0xc0000)
+ return vga_info->BIOSImage + flat - 0xc0000;
+ else
+ return buf + (flat - vbe_offset);
+}
+
+static int atibios_debug_mode(BE_VGAInfo *vga_info, RMREGS *regs,
+ int vesa_mode, struct vbe_mode_info *mode_info)
+{
+ void *buffer = (void *)(M.mem_base + vbe_offset);
+ u16 buffer_seg = (((unsigned long)vbe_offset) >> 4) & 0xff00;
+ u16 buffer_adr = ((unsigned long)vbe_offset) & 0xffff;
+ struct vesa_mode_info *vm;
+ struct vbe_info *info;
+ const u16 *modes_bios, *ptr;
+ u16 *modes;
+ int size;
+
+ debug("VBE: Getting information\n");
+ regs->e.eax = VESA_GET_INFO;
+ regs->e.esi = buffer_seg;
+ regs->e.edi = buffer_adr;
+ info = buffer;
+ memset(info, '\0', sizeof(*info));
+ strcpy(info->signature, "VBE2");
+ BE_int86(0x10, regs, regs);
+ if (regs->e.eax != 0x4f) {
+ debug("VESA_GET_INFO: error %x\n", regs->e.eax);
+ return -ENOSYS;
+ }
+ debug("version %x\n", le16_to_cpu(info->version));
+ debug("oem '%s'\n", (char *)bios_ptr(buffer, vga_info,
+ info->oem_string_ptr));
+ debug("vendor '%s'\n", (char *)bios_ptr(buffer, vga_info,
+ info->vendor_name_ptr));
+ debug("product '%s'\n", (char *)bios_ptr(buffer, vga_info,
+ info->product_name_ptr));
+ debug("rev '%s'\n", (char *)bios_ptr(buffer, vga_info,
+ info->product_rev_ptr));
+ modes_bios = bios_ptr(buffer, vga_info, info->modes_ptr);
+ debug("Modes: ");
+ for (ptr = modes_bios; *ptr != 0xffff; ptr++)
+ debug("%x ", le16_to_cpu(*ptr));
+ debug("\nmemory %dMB\n", le16_to_cpu(info->total_memory) >> 4);
+ size = (ptr - modes_bios) * sizeof(u16) + 2;
+ modes = malloc(size);
+ if (!modes)
+ return -ENOMEM;
+ memcpy(modes, modes_bios, size);
+
+ regs->e.eax = VESA_GET_CUR_MODE;
+ BE_int86(0x10, regs, regs);
+ if (regs->e.eax != 0x4f) {
+ debug("VESA_GET_CUR_MODE: error %x\n", regs->e.eax);
+ return -ENOSYS;
+ }
+ debug("Current mode %x\n", regs->e.ebx);
+
+ for (ptr = modes; *ptr != 0xffff; ptr++) {
+ int mode = le16_to_cpu(*ptr);
+ bool linear_ok;
+ int attr;
+
+ debug("Mode %x: ", mode);
+ memset(buffer, '\0', sizeof(struct vbe_mode_info));
+ regs->e.eax = VESA_GET_MODE_INFO;
+ regs->e.ebx = 0;
+ regs->e.ecx = mode;
+ regs->e.edx = 0;
+ regs->e.esi = buffer_seg;
+ regs->e.edi = buffer_adr;
+ BE_int86(0x10, regs, regs);
+ if (regs->e.eax != 0x4f) {
+ debug("VESA_GET_MODE_INFO: error %x\n", regs->e.eax);
+ continue;
+ }
+ memcpy(mode_info->mode_info_block, buffer,
+ sizeof(struct vesa_mode_info));
+ mode_info->valid = true;
+ vm = &mode_info->vesa;
+ attr = le16_to_cpu(vm->mode_attributes);
+ linear_ok = attr & 0x80;
+ debug("res %d x %d, %d bpp, mm %d, (Linear %s, attr %02x)\n",
+ le16_to_cpu(vm->x_resolution),
+ le16_to_cpu(vm->y_resolution),
+ vm->bits_per_pixel, vm->memory_model,
+ linear_ok ? "OK" : "not available",
+ attr);
+ debug("\tRGB pos=%d,%d,%d, size=%d,%d,%d\n",
+ vm->red_mask_pos, vm->green_mask_pos, vm->blue_mask_pos,
+ vm->red_mask_size, vm->green_mask_size,
+ vm->blue_mask_size);
+ }
+
+ return 0;
+}
+
+static int atibios_set_vesa_mode(RMREGS *regs, int vesa_mode,
+ struct vbe_mode_info *mode_info)
+{
+ void *buffer = (void *)(M.mem_base + vbe_offset);
+ u16 buffer_seg = (((unsigned long)vbe_offset) >> 4) & 0xff00;
+ u16 buffer_adr = ((unsigned long)vbe_offset) & 0xffff;
+ struct vesa_mode_info *vm;
+
+ debug("VBE: Setting VESA mode %#04x\n", vesa_mode);
+ regs->e.eax = VESA_SET_MODE;
+ regs->e.ebx = vesa_mode;
+ /* request linear framebuffer mode and don't clear display */
+ regs->e.ebx |= (1 << 14) | (1 << 15);
+ BE_int86(0x10, regs, regs);
+ if (regs->e.eax != 0x4f) {
+ debug("VESA_SET_MODE: error %x\n", regs->e.eax);
+ return -ENOSYS;
+ }
+
+ memset(buffer, '\0', sizeof(struct vbe_mode_info));
+ debug("VBE: Geting info for VESA mode %#04x\n", vesa_mode);
+ regs->e.eax = VESA_GET_MODE_INFO;
+ regs->e.ecx = vesa_mode;
+ regs->e.esi = buffer_seg;
+ regs->e.edi = buffer_adr;
+ BE_int86(0x10, regs, regs);
+ if (regs->e.eax != 0x4f) {
+ debug("VESA_GET_MODE_INFO: error %x\n", regs->e.eax);
+ return -ENOSYS;
+ }
+
+ memcpy(mode_info->mode_info_block, buffer,
+ sizeof(struct vesa_mode_info));
+ mode_info->valid = true;
+ mode_info->video_mode = vesa_mode;
+ vm = &mode_info->vesa;
+ vm->x_resolution = le16_to_cpu(vm->x_resolution);
+ vm->y_resolution = le16_to_cpu(vm->y_resolution);
+ vm->bytes_per_scanline = le16_to_cpu(vm->bytes_per_scanline);
+ vm->phys_base_ptr = le32_to_cpu(vm->phys_base_ptr);
+ vm->mode_attributes = le16_to_cpu(vm->mode_attributes);
+ debug("VBE: Init complete\n");
+
+ return 0;
+}
+#endif /* CONFIG_FRAMEBUFFER_SET_VESA_MODE */
+
/****************************************************************************
PARAMETERS:
-pcidev - PCI device info for the video card on the bus to boot
-VGAInfo - BIOS emulator VGA info structure
+pcidev - PCI device info for the video card on the bus to boot
+vga_info - BIOS emulator VGA info structure
REMARKS:
This function executes the BIOS POST code on the controller. We assume that
at this stage the controller has its I/O and memory space enabled and
that all other controllers are in a disabled state.
****************************************************************************/
-static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo * VGAInfo)
+#ifdef CONFIG_DM_PCI
+static void PCI_doBIOSPOST(struct udevice *pcidev, BE_VGAInfo *vga_info,
+ int vesa_mode, struct vbe_mode_info *mode_info)
+#else
+static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo *vga_info,
+ int vesa_mode, struct vbe_mode_info *mode_info)
+#endif
{
RMREGS regs;
RMSREGS sregs;
+#ifdef CONFIG_DM_PCI
+ pci_dev_t bdf;
+#endif
/* Determine the value to store in AX for BIOS POST. Per the PCI specs,
AH must contain the bus and AL must contain the devfn, encoded as
*/
memset(®s, 0, sizeof(regs));
memset(&sregs, 0, sizeof(sregs));
+#ifdef CONFIG_DM_PCI
+ bdf = dm_pci_get_bdf(pcidev);
+ regs.x.ax = (int)PCI_BUS(bdf) << 8 |
+ (int)PCI_DEV(bdf) << 3 | (int)PCI_FUNC(bdf);
+#else
regs.x.ax = ((int)PCI_BUS(pcidev) << 8) |
((int)PCI_DEV(pcidev) << 3) | (int)PCI_FUNC(pcidev);
-
+#endif
/*Setup the X86 emulator for the VGA BIOS*/
- BE_setVGA(VGAInfo);
+ BE_setVGA(vga_info);
/*Execute the BIOS POST code*/
BE_callRealMode(0xC000, 0x0003, ®s, &sregs);
/*Cleanup and exit*/
- BE_getVGA(VGAInfo);
+ BE_getVGA(vga_info);
+
+#ifdef CONFIG_FRAMEBUFFER_SET_VESA_MODE
+ /* Useful for debugging */
+ if (0)
+ atibios_debug_mode(vga_info, ®s, vesa_mode, mode_info);
+ if (vesa_mode != -1)
+ atibios_set_vesa_mode(®s, vesa_mode, mode_info);
+#endif
}
/****************************************************************************
PARAMETERS:
-pcidev - PCI device info for the video card on the bus
-bar - Place to return the base address register offset to use
+pcidev - PCI device info for the video card on the bus
+bar - Place to return the base address register offset to use
RETURNS:
The address to use to map the secondary BIOS (AGP devices)
it programmed to all 1's. It must be restored to the correct value
later.
****************************************************************************/
+#ifdef CONFIG_DM_PCI
+static u32 PCI_findBIOSAddr(struct udevice *pcidev, int *bar)
+#else
static u32 PCI_findBIOSAddr(pci_dev_t pcidev, int *bar)
+#endif
{
u32 base, size;
for (*bar = 0x10; *bar <= 0x14; (*bar) += 4) {
+#ifdef CONFIG_DM_PCI
+ dm_pci_read_config32(pcidev, *bar, &base);
+#else
pci_read_config_dword(pcidev, *bar, &base);
+#endif
if (!(base & 0x1)) {
+#ifdef CONFIG_DM_PCI
+ dm_pci_write_config32(pcidev, *bar, 0xFFFFFFFF);
+ dm_pci_read_config32(pcidev, *bar, &size);
+#else
pci_write_config_dword(pcidev, *bar, 0xFFFFFFFF);
pci_read_config_dword(pcidev, *bar, &size);
+#endif
size = ~(size & ~0xFF) + 1;
if (size >= MAX_BIOSLEN)
return base & ~0xFF;
Anyway to fix this we change all I/O mapped base registers and
chop off the top bits.
****************************************************************************/
+#ifdef CONFIG_DM_PCI
+static void PCI_fixupIObase(struct udevice *pcidev, int reg, u32 *base)
+#else
static void PCI_fixupIObase(pci_dev_t pcidev, int reg, u32 * base)
+#endif
{
if ((*base & 0x1) && (*base > 0xFFFE)) {
*base &= 0xFFFF;
+#ifdef CONFIG_DM_PCI
+ dm_pci_write_config32(pcidev, reg, *base);
+#else
pci_write_config_dword(pcidev, reg, *base);
+#endif
}
}
/****************************************************************************
PARAMETERS:
-pcidev - PCI device info for the video card on the bus
+pcidev - PCI device info for the video card on the bus
RETURNS:
Pointers to the mapped BIOS image
REMARKS:
Maps a pointer to the BIOS image on the graphics card on the PCI bus.
****************************************************************************/
+#ifdef CONFIG_DM_PCI
+void *PCI_mapBIOSImage(struct udevice *pcidev)
+#else
void *PCI_mapBIOSImage(pci_dev_t pcidev)
+#endif
{
- u32 BIOSImagePhys;
+ u32 BIOSImageBus;
int BIOSImageBAR;
u8 *BIOSImage;
/*Save PCI BAR registers that might get changed*/
+#ifdef CONFIG_DM_PCI
+ dm_pci_read_config32(pcidev, PCI_ROM_ADDRESS, &saveROMBaseAddress);
+ dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_0, &saveBaseAddress10);
+ dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14);
+ dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_2, &saveBaseAddress18);
+ dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20);
+#else
pci_read_config_dword(pcidev, PCI_ROM_ADDRESS, &saveROMBaseAddress);
pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &saveBaseAddress10);
pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14);
pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_2, &saveBaseAddress18);
pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20);
+#endif
/*Fix up I/O base registers to less than 64K */
if(saveBaseAddress14 != 0)
/* Some cards have problems that stop us from being able to read the
BIOS image from the ROM BAR. To fix this we have to do some chipset
specific programming for different cards to solve this problem.
- */
+ */
- if ((BIOSImagePhys = PCI_findBIOSAddr(pcidev, &BIOSImageBAR)) == 0) {
+ BIOSImageBus = PCI_findBIOSAddr(pcidev, &BIOSImageBAR);
+ if (BIOSImageBus == 0) {
printf("Find bios addr error\n");
return NULL;
}
- BIOSImage = (u8 *) BIOSImagePhys;
+#ifdef CONFIG_DM_PCI
+ BIOSImage = dm_pci_bus_to_virt(pcidev, BIOSImageBus,
+ PCI_REGION_MEM, 0, MAP_NOCACHE);
/*Change the PCI BAR registers to map it onto the bus.*/
- pci_write_config_dword(pcidev, BIOSImageBAR, 0);
- pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, BIOSImagePhys | 0x1);
+ dm_pci_write_config32(pcidev, BIOSImageBAR, 0);
+ dm_pci_write_config32(pcidev, PCI_ROM_ADDRESS, BIOSImageBus | 0x1);
+#else
+ BIOSImage = pci_bus_to_virt(pcidev, BIOSImageBus,
+ PCI_REGION_MEM, 0, MAP_NOCACHE);
+ /*Change the PCI BAR registers to map it onto the bus.*/
+ pci_write_config_dword(pcidev, BIOSImageBAR, 0);
+ pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, BIOSImageBus | 0x1);
+#endif
udelay(1);
/*Check that the BIOS image is valid. If not fail, or return the
/****************************************************************************
PARAMETERS:
-pcidev - PCI device info for the video card on the bus
+pcidev - PCI device info for the video card on the bus
REMARKS:
Unmaps the BIOS image for the device and restores framebuffer mappings
****************************************************************************/
+#ifdef CONFIG_DM_PCI
+void PCI_unmapBIOSImage(struct udevice *pcidev, void *BIOSImage)
+{
+ dm_pci_write_config32(pcidev, PCI_ROM_ADDRESS, saveROMBaseAddress);
+ dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_0, saveBaseAddress10);
+ dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_1, saveBaseAddress14);
+ dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_2, saveBaseAddress18);
+ dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_4, saveBaseAddress20);
+}
+#else
void PCI_unmapBIOSImage(pci_dev_t pcidev, void *BIOSImage)
{
pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, saveROMBaseAddress);
pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_2, saveBaseAddress18);
pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_4, saveBaseAddress20);
}
+#endif
/****************************************************************************
PARAMETERS:
-pcidev - PCI device info for the video card on the bus to boot
+pcidev - PCI device info for the video card on the bus to boot
VGAInfo - BIOS emulator VGA info structure
RETURNS:
-True if successfully initialised, false if not.
+true if successfully initialised, false if not.
REMARKS:
Loads and POST's the display controllers BIOS, directly from the BIOS
image we can extract over the PCI bus.
****************************************************************************/
-static int PCI_postController(pci_dev_t pcidev, BE_VGAInfo * VGAInfo)
+#ifdef CONFIG_DM_PCI
+static int PCI_postController(struct udevice *pcidev, uchar *bios_rom,
+ int bios_len, BE_VGAInfo *vga_info,
+ int vesa_mode, struct vbe_mode_info *mode_info)
+#else
+static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
+ BE_VGAInfo *vga_info, int vesa_mode,
+ struct vbe_mode_info *mode_info)
+#endif
{
- u32 BIOSImageLen;
- uchar *mappedBIOS;
- uchar *copyOfBIOS;
+ u32 bios_image_len;
+ uchar *mapped_bios;
+ uchar *copy_of_bios;
+#ifdef CONFIG_DM_PCI
+ pci_dev_t bdf;
+#endif
- /*Allocate memory to store copy of BIOS from display controller*/
- if ((mappedBIOS = PCI_mapBIOSImage(pcidev)) == NULL) {
- printf("videoboot: Video ROM failed to map!\n");
- return false;
- }
+ if (bios_rom) {
+ copy_of_bios = bios_rom;
+ bios_image_len = bios_len;
+ } else {
+ /*
+ * Allocate memory to store copy of BIOS from display
+ * controller
+ */
+ mapped_bios = PCI_mapBIOSImage(pcidev);
+ if (mapped_bios == NULL) {
+ printf("videoboot: Video ROM failed to map!\n");
+ return false;
+ }
- BIOSImageLen = mappedBIOS[2] * 512;
+ bios_image_len = mapped_bios[2] * 512;
- if ((copyOfBIOS = malloc(BIOSImageLen)) == NULL) {
- printf("videoboot: Out of memory!\n");
- return false;
+ copy_of_bios = malloc(bios_image_len);
+ if (copy_of_bios == NULL) {
+ printf("videoboot: Out of memory!\n");
+ return false;
+ }
+ memcpy(copy_of_bios, mapped_bios, bios_image_len);
+ PCI_unmapBIOSImage(pcidev, mapped_bios);
}
- memcpy(copyOfBIOS, mappedBIOS, BIOSImageLen);
-
- PCI_unmapBIOSImage(pcidev, mappedBIOS);
- /*Save information in VGAInfo structure*/
- VGAInfo->function = PCI_FUNC(pcidev);
- VGAInfo->device = PCI_DEV(pcidev);
- VGAInfo->bus = PCI_BUS(pcidev);
- VGAInfo->pcidev = pcidev;
- VGAInfo->BIOSImage = copyOfBIOS;
- VGAInfo->BIOSImageLen = BIOSImageLen;
+ /*Save information in vga_info structure*/
+#ifdef CONFIG_DM_PCI
+ bdf = dm_pci_get_bdf(pcidev);
+ vga_info->function = PCI_FUNC(bdf);
+ vga_info->device = PCI_DEV(bdf);
+ vga_info->bus = PCI_BUS(bdf);
+#else
+ vga_info->function = PCI_FUNC(pcidev);
+ vga_info->device = PCI_DEV(pcidev);
+ vga_info->bus = PCI_BUS(pcidev);
+#endif
+ vga_info->pcidev = pcidev;
+ vga_info->BIOSImage = copy_of_bios;
+ vga_info->BIOSImageLen = bios_image_len;
/*Now execute the BIOS POST for the device*/
- if (copyOfBIOS[0] != 0x55 || copyOfBIOS[1] != 0xAA) {
+ if (copy_of_bios[0] != 0x55 || copy_of_bios[1] != 0xAA) {
printf("videoboot: Video ROM image is invalid!\n");
return false;
}
- PCI_doBIOSPOST(pcidev, VGAInfo);
+ PCI_doBIOSPOST(pcidev, vga_info, vesa_mode, mode_info);
/*Reset the size of the BIOS image to the final size*/
- VGAInfo->BIOSImageLen = copyOfBIOS[2] * 512;
+ vga_info->BIOSImageLen = copy_of_bios[2] * 512;
return true;
}
-/****************************************************************************
-PARAMETERS:
-pcidev - PCI device info for the video card on the bus to boot
-pVGAInfo - Place to return VGA info structure is requested
-cleanUp - True to clean up on exit, false to leave emulator active
-
-REMARKS:
-Boots the PCI/AGP video card on the bus using the Video ROM BIOS image
-and the X86 BIOS emulator module.
-****************************************************************************/
-int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp)
+#ifdef CONFIG_DM_PCI
+int biosemu_setup(struct udevice *pcidev, BE_VGAInfo **vga_infop)
+#else
+int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **vga_infop)
+#endif
{
BE_VGAInfo *VGAInfo;
+#ifdef CONFIG_DM_PCI
+ pci_dev_t bdf = dm_pci_get_bdf(pcidev);
printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n",
- PCI_BUS(pcidev), PCI_FUNC(pcidev), PCI_DEV(pcidev));
-
+ PCI_BUS(bdf), PCI_FUNC(bdf), PCI_DEV(bdf));
+#else
+ printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n",
+ PCI_BUS(pcidev), PCI_FUNC(pcidev), PCI_DEV(pcidev));
+#endif
/*Initialise the x86 BIOS emulator*/
if ((VGAInfo = malloc(sizeof(*VGAInfo))) == NULL) {
printf("videoboot: Out of memory!\n");
- return false;
+ return -ENOMEM;
}
memset(VGAInfo, 0, sizeof(*VGAInfo));
BE_init(0, 65536, VGAInfo, 0);
+ *vga_infop = VGAInfo;
- /*Post all the display controller BIOS'es*/
- PCI_postController(pcidev, VGAInfo);
+ return 0;
+}
+
+void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void))
+{
+ X86EMU_setupIntrFunc(intnum, (X86EMU_intrFuncs)int_func);
+}
- /*Cleanup and exit the emulator if requested. If the BIOS emulator
- is needed after booting the card, we will not call BE_exit and
- leave it enabled for further use (ie: VESA driver etc).
+#ifdef CONFIG_DM_PCI
+int biosemu_run(struct udevice *pcidev, uchar *bios_rom, int bios_len,
+ BE_VGAInfo *vga_info, int clean_up, int vesa_mode,
+ struct vbe_mode_info *mode_info)
+#else
+int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
+ BE_VGAInfo *vga_info, int clean_up, int vesa_mode,
+ struct vbe_mode_info *mode_info)
+#endif
+{
+ /*Post all the display controller BIOS'es*/
+ if (!PCI_postController(pcidev, bios_rom, bios_len, vga_info,
+ vesa_mode, mode_info))
+ return -EINVAL;
+
+ /*
+ * Cleanup and exit the emulator if requested. If the BIOS emulator
+ * is needed after booting the card, we will not call BE_exit and
+ * leave it enabled for further use (ie: VESA driver etc).
*/
- if (cleanUp) {
+ if (clean_up) {
BE_exit();
- if (VGAInfo->BIOSImage)
- free(VGAInfo->BIOSImage);
- free(VGAInfo);
- VGAInfo = NULL;
+ if (vga_info->BIOSImage &&
+ (ulong)(vga_info->BIOSImage) != 0xc0000)
+ free(vga_info->BIOSImage);
+ free(vga_info);
}
- /*Return VGA info pointer if the caller requested it*/
+
+ return 0;
+}
+
+/****************************************************************************
+PARAMETERS:
+pcidev - PCI device info for the video card on the bus to boot
+pVGAInfo - Place to return VGA info structure is requested
+cleanUp - true to clean up on exit, false to leave emulator active
+
+REMARKS:
+Boots the PCI/AGP video card on the bus using the Video ROM BIOS image
+and the X86 BIOS emulator module.
+****************************************************************************/
+#ifdef CONFIG_DM_PCI
+int BootVideoCardBIOS(struct udevice *pcidev, BE_VGAInfo **pVGAInfo,
+ int clean_up)
+#else
+int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int clean_up)
+#endif
+{
+ BE_VGAInfo *VGAInfo;
+ int ret;
+
+ ret = biosemu_setup(pcidev, &VGAInfo);
+ if (ret)
+ return false;
+ ret = biosemu_run(pcidev, NULL, 0, VGAInfo, clean_up, -1, NULL);
+ if (ret)
+ return false;
+
+ /* Return VGA info pointer if the caller requested it*/
if (pVGAInfo)
*pVGAInfo = VGAInfo;
+
return true;
}
-
-#endif
projects / oweals / u-boot.git / blobdiff