[B<-encrypt>]
[B<-decrypt>]
[B<-sign>]
+[B<-resign>]
[B<-verify>]
[B<-pk7out>]
-[B<-des>]
-[B<-des3>]
-[B<-rc2-40>]
-[B<-rc2-64>]
-[B<-rc2-128>]
+[B<-[cipher]>]
[B<-in file>]
+[B<-CAfile file>]
+[B<-CApath dir>]
+[B<-attime timestamp>]
+[B<-check_ss_sig>]
+[B<-crl_check>]
+[B<-crl_check_all>]
+[B<-explicit_policy>]
+[B<-extended_crl>]
+[B<-ignore_critical>]
+[B<-inhibit_any>]
+[B<-inhibit_map>]
+[B<-issuer_checks>]
+[B<-partial_chain>]
+[B<-policy arg>]
+[B<-policy_check>]
+[B<-policy_print>]
+[B<-purpose purpose>]
+[B<-suiteB_128>]
+[B<-suiteB_128_only>]
+[B<-suiteB_192>]
+[B<-trusted_first>]
+[B<-use_deltas>]
+[B<-verify_depth num>]
+[B<-verify_email email>]
+[B<-verify_hostname hostname>]
+[B<-verify_ip ip>]
+[B<-verify_name name>]
+[B<-x509_strict>]
[B<-certfile file>]
[B<-signer file>]
[B<-recip file>]
-[B<-in file>]
+[B<-inform SMIME|PEM|DER>]
+[B<-passin arg>]
[B<-inkey file>]
[B<-out file>]
+[B<-outform SMIME|PEM|DER>]
+[B<-content file>]
[B<-to addr>]
[B<-from ad>]
[B<-subject s>]
[B<-text>]
+[B<-indef>]
+[B<-noindef>]
+[B<-stream>]
[B<-rand file(s)>]
+[B<-md digest>]
[cert.pem]...
=head1 DESCRIPTION
=head1 COMMAND OPTIONS
-There are five operation options that set the type of operation to be performed.
+There are six operation options that set the type of operation to be performed.
The meaning of the other options varies according to the operation type.
=over 4
takes an input message and writes out a PEM encoded PKCS#7 structure.
+=item B<-resign>
+
+resign a message: take an existing message and one or more new signers.
+
=item B<-in filename>
the input message to be encrypted or signed or the MIME message to
be decrypted or verified.
+=item B<-inform SMIME|PEM|DER>
+
+this specifies the input format for the PKCS#7 structure. The default
+is B<SMIME> which reads an S/MIME format message. B<PEM> and B<DER>
+format change this to expect PEM and DER format PKCS#7 structures
+instead. This currently only affects the input format of the PKCS#7
+structure, if no PKCS#7 structure is being input (for example with
+B<-encrypt> or B<-sign>) this option has no effect.
+
=item B<-out filename>
the message text that has been decrypted or verified or the output MIME
format message that has been signed or verified.
+=item B<-outform SMIME|PEM|DER>
+
+this specifies the output format for the PKCS#7 structure. The default
+is B<SMIME> which write an S/MIME format message. B<PEM> and B<DER>
+format change this to write PEM and DER format PKCS#7 structures
+instead. This currently only affects the output format of the PKCS#7
+structure, if no PKCS#7 structure is being output (for example with
+B<-verify> or B<-decrypt>) this option has no effect.
+
+=item B<-stream -indef -noindef>
+
+the B<-stream> and B<-indef> options are equivalent and enable streaming I/O
+for encoding operations. This permits single pass processing of data without
+the need to hold the entire contents in memory, potentially supporting very
+large files. Streaming is automatically set for S/MIME signing with detached
+data if the output format is B<SMIME> it is currently off by default for all
+other operations.
+
+=item B<-noindef>
+
+disable streaming I/O where it would produce and indefinite length constructed
+encoding. This option currently has no effect. In future streaming will be
+enabled by default on all relevant operations and this option will disable it.
+
+=item B<-content filename>
+
+This specifies a file containing the detached content, this is only
+useful with the B<-verify> command. This is only usable if the PKCS#7
+structure is using the detached signature form where the content is
+not included. This option will override any content if the input format
+is S/MIME and it uses the multipart/signed MIME content type.
+
=item B<-text>
this option adds plain text (text/plain) MIME headers to the supplied
is a hash of each subject name (using B<x509 -hash>) should be linked
to each certificate.
-=item B<-des -des3 -rc2-40 -rc2-64 -rc2-128>
+=item B<-md digest>
+
+digest algorithm to use when signing or resigning. If not present then the
+default digest algorithm for the signing key will be used (usually SHA1).
+
+=item B<-[cipher]>
-the encryption algorithm to use. DES (56 bits), triple DES (168 bits)
-or 40, 64 or 128 bit RC2 respectively if not specified 40 bit RC2 is
-used. Only used with B<-encrypt>.
+the encryption algorithm to use. For example DES (56 bits) - B<-des>,
+triple DES (168 bits) - B<-des3>,
+EVP_get_cipherbyname() function) can also be used preceded by a dash, for
+example B<-aes_128_cbc>. See L<B<enc>|enc(1)> for list of ciphers
+supported by your version of OpenSSL.
+
+If not specified triple DES is used. Only used with B<-encrypt>.
=item B<-nointern>
=item B<-signer file>
-the signers certificate when signing a message. If a message is
-being verified then the signers certificates will be written to this
-file if the verification was successful.
+a signing certificate when signing or resigning a message, this option can be
+used multiple times if more than one signer is required. If a message is being
+verified then the signers certificates will be written to this file if the
+verification was successful.
=item B<-recip file>
the private key to use when signing or decrypting. This must match the
corresponding certificate. If this option is not specified then the
private key must be included in the certificate file specified with
-the B<-recip> or B<-signer> file.
+the B<-recip> or B<-signer> file. When signing this option can be used
+multiple times to specify successive keys.
+
+=item B<-passin arg>
+
+the private key password source. For more information about the format of B<arg>
+see the B<PASS PHRASE ARGUMENTS> section in L<openssl(1)|openssl(1)>.
=item B<-rand file(s)>
then many S/MIME mail clients check the signers certificate's email
address matches that specified in the From: address.
+=item B<-attime>, B<-check_ss_sig>, B<-crl_check>, B<-crl_check_all>,
+B<explicit_policy>, B<-extended_crl>, B<-ignore_critical>, B<-inhibit_any>,
+B<-inhibit_map>, B<-issuer_checks>, B<-partial_chain>, B<-policy>,
+B<-policy_check>, B<-policy_print>, B<-purpose>, B<-suiteB_128>,
+B<-suiteB_128_only>, B<-suiteB_192>, B<-trusted_first>, B<-use_deltas>,
+B<-verify_depth>, B<-verify_email>, B<-verify_hostname>, B<-verify_ip>,
+B<-verify_name>, B<-x509_strict>
+
+Set various options of certificate chain verification. See
+L<B<verify>|verify(1)> manual page for details.
+
=back
=head1 NOTES
achieve the correct format.
The supplied message to be signed or encrypted must include the
-necessary MIME headers: or many S/MIME clients wont display it
+necessary MIME headers or many S/MIME clients wont display it
properly (if at all). You can use the B<-text> option to automatically
add plain text headers.
clients. Strictly speaking these process PKCS#7 enveloped data: PKCS#7
encrypted data is used for other purposes.
+The B<-resign> option uses an existing message digest when adding a new
+signer. This means that attributes must be present in at least one existing
+signer using the same message digest or this operation will fail.
+
+The B<-stream> and B<-indef> options enable experimental streaming I/O support.
+As a result the encoding is BER using indefinite length constructed encoding
+and no longer DER. Streaming is supported for the B<-encrypt> operation and the
+B<-sign> operation if the content is not detached.
+
+Streaming is always used for the B<-sign> operation with detached data but
+since the content is no longer part of the PKCS#7 structure the encoding
+remains DER.
+
=head1 EXIT CODES
=over 4
-=item 0
+=item Z<>0
the operation was completely successfully.
-=item 1
+=item Z<>1
an error occurred parsing the command options.
-=item 2
+=item Z<>2
one of the input files could not be read.
-=item 3
+=item Z<>3
an error occurred creating the PKCS#7 file or when reading the MIME
message.
-=item 4
+=item Z<>4
an error occurred decrypting or verifying the message.
-=item 5
+=item Z<>5
the message was verified correctly but an error occurred writing out
the signers certificates.
openssl smime -sign -in message.txt -text -out mail.msg \
-signer mycert.pem
-Create and opaque signed message
+Create an opaque signed message:
openssl smime -sign -in message.txt -text -out mail.msg -nodetach \
-signer mycert.pem
openssl smime -sign -in in.txt -text -out mail.msg \
-signer mycert.pem -inkey mykey.pem -certfile mycerts.pem
+Create a signed message with two signers:
+
+ openssl smime -sign -in message.txt -text -out mail.msg \
+ -signer mycert.pem -signer othercert.pem
+
Send a signed message under Unix directly to sendmail, including headers:
openssl smime -sign -in in.txt -text -signer mycert.pem \
Sign and encrypt mail:
openssl smime -sign -in ml.txt -signer my.pem -text \
- | openssl -encrypt -out mail.msg \
+ | openssl smime -encrypt -out mail.msg \
-from steve@openssl.org -to someone@somewhere \
-subject "Signed and Encrypted message" -des3 user.pem
-Note: the encryption command does not include the B<-text> option because the message
-being encrypted already has MIME headers.
+Note: the encryption command does not include the B<-text> option because the
+message being encrypted already has MIME headers.
Decrypt mail:
openssl smime -decrypt -in mail.msg -recip mycert.pem -inkey key.pem
+The output from Netscape form signing is a PKCS#7 structure with the
+detached signature format. You can use this program to verify the
+signature by line wrapping the base64 encoded structure and surrounding
+it with:
+
+ -----BEGIN PKCS7-----
+ -----END PKCS7-----
+
+and using the command:
+
+ openssl smime -verify -inform PEM -in signature.pem -content content.txt
+
+Alternatively you can base64 decode the signature and use:
+
+ openssl smime -verify -inform DER -in signature.der -content content.txt
+
+Create an encrypted message using 128 bit Camellia:
+
+ openssl smime -encrypt -in plain.txt -camellia128 -out mail.msg cert.pem
+
+Add a signer to an existing message:
+
+ openssl smime -resign -in mail.msg -signer newsign.pem -out mail2.msg
+
=head1 BUGS
-The MIME parser isn't very clever: it seems to handle most messages that I've thrown
-at it but it may choke on others.
+The MIME parser isn't very clever: it seems to handle most messages that I've
+thrown at it but it may choke on others.
-The code currently will only write out the signer's certificate to a file: if the
-signer has a separate encryption certificate this must be manually extracted. There
-should be some heuristic that determines the correct encryption certificate.
+The code currently will only write out the signer's certificate to a file: if
+the signer has a separate encryption certificate this must be manually
+extracted. There should be some heuristic that determines the correct
+encryption certificate.
-Ideally a database should be maintained of a certificates for each email address.
+Ideally a database should be maintained of a certificates for each email
+address.
The code doesn't currently take note of the permitted symmetric encryption
-algorithms as supplied in the SMIMECapabilities signed attribute. this means the
+algorithms as supplied in the SMIMECapabilities signed attribute. This means the
user has to manually include the correct encryption algorithm. It should store
the list of permitted ciphers in a database and only use those.
The current code can only handle S/MIME v2 messages, the more complex S/MIME v3
structures may cause parsing errors.
+=head1 HISTORY
+
+The use of multiple B<-signer> options and the B<-resign> command were first
+added in OpenSSL 1.0.0
+
+
=cut