configs: rpi: set NR_DRAM_BANKS to four

[oweals/u-boot.git] / doc / README.serial_multi

diff --git a/doc/README.serial_multi b/doc/README.serial_multi
index 1d73376b2c7af6ee05018b534093cb6f327595ab..c9049fd01d667af497967af665b6fc8f54da790e 100644 (file)
--- a/doc/README.serial_multi
+++ b/doc/README.serial_multi
@@ -2,6 +2,8 @@ The support for multiple serial interfaces as implemented is mainly
 intended to allow for modem dial-in / dial-out while still being able
 to use a serial console on a (different) serial port.
 
+MPC8XX Specific
+===============
 At the moment, the ports must be split on a SMC and a SCC port  on  a
 8xx processor; other configurations are not (yet) supported.
 
@@ -33,5 +35,20 @@ just after switching the console:
        setenv sout serial_scc; setenv baudrate 38400
 
 After that press 'enter' at the SCC console. Note that baudrates <38400
-are not allowed on LWMON with watchdog enabled (see CFG_BAUDRATE_TABLE in
+are not allowed on LWMON with watchdog enabled (see CONFIG_SYS_BAUDRATE_TABLE in
 include/configs/lwmon.h).
+
+
+PPC4XX Specific
+===============
+*) The default console is UART0
+
+*) The console can be switched to UART1 by any of the following commands:
+       setenv stdout serial1
+       setenv stderr serial1
+       setenv stdin serial1
+
+*) The console can be switched to UART0 by any of the following commands:
+       setenv stdout serial0
+       setenv stderr serial0
+       setenv stdin serial0