Building
========
-At present 12 RK3288 boards are supported:
+At present 11 RK3288 boards are supported:
- EVB RK3288 - use evb-rk3288 configuration
- - Fennec RK3288 - use fennec-rk3288 configuration
- Firefly RK3288 - use firefly-rk3288 configuration
- Hisense Chromebook - use chromebook_jerry configuration
- Asus C100P Chromebook - use chromebook_minnie configuration
- EVB RK3036 - use evb-rk3036 configuration
- Kylin - use kylin_rk3036 configuration
-One RK3328 board is supported:
+Two RK3328 board are supported:
- - EVB RK3328
+ - EVB RK3328 - use evb-rk3328_defconfig
+ - Pine64 Rock64 board - use rock64-rk3328_defconfig
Size RK3399 boards are supported (aarch64):
=> cd /path/to/u-boot
=> make nanopi-neo4-rk3399_defconfig
=> make
- => make u-boot.itb
- Get the rkbin
Option 2: Package the image with SPL:
- - We need the Python elftools.elf.elffile library for make_fit_atf.py to work
-
- => sudo apt-get install python-pyelftools
-
- Export cross compiler path for aarch64
- Compile ATF
=> cd arm-trusted-firmware
=> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
- (copy bl31.bin into U-Boot root dir)
- => cp build/rk3399/release/bl31/bl31.bin /path/to/u-boot/bl31-rk3399.bin
+ (export bl31.bin)
+ => export BL31=/path/to/arm-trusted-firmware/build/rk3399/release/bl31/bl31.bin
For rest of rk3399 boards.
=> make realclean
=> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
- (copy bl31.elf into U-Boot root dir)
- => cp build/rk3399/release/bl31/bl31.elf /path/to/u-boot
+ (export bl31.elf)
+ => export BL31=/path/to/arm-trusted-firmware/build/rk3399/release/bl31/bl31.elf
- Compile PMU M0 firmware
(export cross compiler path for Cortex-M0 PMU)
=> make CROSS_COMPILE=arm-cortex_m0-eabi-
- (copy rk3399m0.bin into U-Boot root dir)
- => cp rk3399m0.bin /path/to/u-boot
+ (export rk3399m0.bin)
+ => export PMUM0=/path/to/rk3399-cortex-m0/rk3399m0.bin
- Compile U-Boot
=> cd /path/to/u-boot
=> make orangepi-rk3399_defconfig
=> make
- => make u-boot.itb
(Get spl/u-boot-spl-dtb.bin, u-boot.itb images and some boards would get
- spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL)
+ spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL
+
+ If TPL enabled on the target, get tpl/u-boot-tpl-dtb.bin or tpl/u-boot-tpl.bin
+ if CONFIG_TPL_OF_CONTROL not enabled)
Writing to the board with USB
=============================
To write an image that boots from an SD card (assumed to be /dev/mmcblk0):
- ./tools/mkimage -n rk3288 -T rksd -d ./tpl/u-boot-tpl.bin out &&
- cat ./spl/u-boot-spl-dtb.bin >> out &&
- sudo dd if=out of=/dev/mmcblk0 seek=64 &&
+ sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64 &&
sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 seek=16384
Booting from an SD card on RK3188
truncate -s %2048 u-boot.bin
cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out
+Booting from an SD card on Pine64 Rock64 (RK3328)
+=================================================
+
+For Rock64 rk3328 board the following three parts are required:
+TPL, SPL, and the u-boot image tree blob.
+
+ - Write TPL/SPL image at 64 sector
+
+ => sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64
+
+ - Write u-boot image tree blob at 16384 sector
+
+ => sudo dd if=u-boot.itb of=/dev/mmcblk0 seek=16384
+
Booting from an SD card on RK3399
=================================
Hit any key to stop autoboot: 0
=>
+Option 3: Package the image with TPL:
+
+ - Write tpl+spl at 64th sector
+
+ => sudo dd if=idbloader.img of=/dev/sdc seek=64
+
+ - Write U-Boot proper at 16384 sector
+
+ => sudo dd if=u-boot.itb of=/dev/sdc seek=16384
+ => sync
+
+Put this SD (or micro-SD) card into your board and reset it. You should see
+something like:
+
+U-Boot TPL board init
+Trying to boot from BOOTROM
+Returning to boot ROM...
+
+U-Boot SPL board init
+Trying to boot from MMC1
+
+
+U-Boot 2019.07-rc1-00241-g5b3244767a (May 08 2019 - 10:51:06 +0530)
+
+Model: Orange Pi RK3399 Board
+DRAM: 2 GiB
+MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0
+Loading Environment from MMC... OK
+In: serial@ff1a0000
+Out: serial@ff1a0000
+Err: serial@ff1a0000
+Model: Orange Pi RK3399 Board
+Net: eth0: ethernet@fe300000
+Hit any key to stop autoboot: 0
+=>
+
Using fastboot on rk3288
========================
- Write GPT partition layout to mmc device which fastboot want to use it to
offset 128KB and the whole image is padded to 4MB which is the SPI flash size.
The position of U-Boot is controlled with this setting in U-Boot:
- #define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
+ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
If you have a Dediprog em100pro connected then you can write the image with: