Atmel AT91 Evaluation kits
+Index
+ - I. Board mapping & boot media
+ - II. NAND partition table
+ - III. watchdog support
+
I. Board mapping & boot media
------------------------------------------------------------------------------
AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK
You can choose your storage location at config step (here for at91sam9rlek) :
make at91sam9rlek_nandflash_config - use nand flash
-II. Watchdog support
+
+------------------------------------------------------------------------------
+AT91SAM9N12EK, AT91SAM9X5EK
+------------------------------------------------------------------------------
+
+Memory map
+ 0x20000000 - 27FFFFFF SDRAM (128 MB)
+
+Environment variables
+
+ U-Boot environment variables can be stored at different places:
+ - Nand flash.
+ - SD/MMC card
+ - Serialflash/Dataflash on SPI chip select 0
+
+ You can choose your storage location at config step (here for at91sam9x5ek) :
+ make at91sam9x5ek_dataflash_config - use data flash
+ make at91sam9x5ek_mmc_config - use sd/mmc card
+ make at91sam9x5ek_nandflash_config - use nand flash
+ make at91sam9x5ek_spiflash_config - use serial flash
+
+
+------------------------------------------------------------------------------
+SAMA5D3XEK
+------------------------------------------------------------------------------
+
+Memory map
+ 0x20000000 - 3FFFFFFF SDRAM (512 MB)
+
+Environment variables
+
+ U-Boot environment variables can be stored at different places:
+ - Nand flash.
+ - SD/MMC card
+ - Serialflash on SPI chip select 0
+
+ You can choose your storage location at config step (here for sama5d3xek) :
+ make sama5d3xek_mmc_config - use SD/MMC card
+ make sama5d3xek_nandflash_config - use nand flash
+ make sama5d3xek_serialflash_config - use serial flash
+
+
+II. NAND partition table
+
+ All the board support boot from NAND flash will use the following NAND
+ partition table
+
+ 0x00000000 - 0x0003FFFF bootstrap (256 KiB)
+ 0x00040000 - 0x000BFFFF u-boot (512 KiB)
+ 0x000C0000 - 0x000FFFFF env (256 KiB)
+ 0x00100000 - 0x0013FFFF env_redundant (256 KiB)
+ 0x00140000 - 0x0017FFFF spare (256 KiB)
+ 0x00180000 - 0x001FFFFF dtb (512 KiB)
+ 0x00200000 - 0x007FFFFF kernel (6 MiB)
+ 0x00800000 - 0xxxxxxxxx rootfs (All left)
+
+III. Watchdog support
For security reasons, the at91 watchdog is running at boot time and,
if deactivated, cannot be used anymore.
your code (make sure not to disable it in AT91Bootstrap for instance).
In the U-Boot configuration, the AT91 watchdog support is enabled using
- the CONFIG_AT91SAM9_WATCHDOG and CONFIG_HW_WATCHDOG options.
+ the CONFIG_WDT and CONFIG_WDT_AT91 options.