* Make Ethernet autonegotiation on INCA-IP work for all clock rates;

[oweals/u-boot.git] / doc / README-i386

diff --git a/doc/README-i386 b/doc/README-i386
index 99b3e198c4f10ce7669bcaec56d7e25ba242e6fa..02b753cbd7f48db79a9663ba8e86abb14d3cd7cb 100644 (file)
--- a/doc/README-i386
+++ b/doc/README-i386
@@ -1,26 +1,26 @@
-This is my attempt to port PPCBoot to the i386 platform. This
+This is my attempt to port U-Boot to the i386 platform. This
 work was sponsored by my emplyer, Omicron Ceti AB. http://www.omicron.se
 
 It is currently capable of booting a linux bzImage from flash on
 the AMD SC520 CDP platform.
 
-It was originally based on PPCBoot taken from the CVS October 28 2002.  
+It was originally based on PPCBoot taken from the CVS October 28 2002.
 
 To compile:
 
 1) Unpack the source tree, either from the complete tarball or
    from the virgin snapshot + the patch
-   
+
 2) Configure the source
    $ make sc520_cdp_comfig
    $ make
-   
+
 To use this code on the CDP:
 1) Make a suitable kernel, I used 2.4.19 with the mtd-support updated
    from the MTD CVS and a patch to allow root=/dev/mtdblock1 which I
-   included at the end of this file. 
+   included at the end of this file.
    The following options in the MTD section might be useful:
-   
+
    CONFIG_MTD_PHYSMAP=y
    CONFIG_MTD_PHYSMAP_START=38100000
    CONFIG_MTD_PHYSMAP_LEN=7a0000
@@ -28,33 +28,32 @@ To use this code on the CDP:
 
 
 2) Program it in to the CDP flashbank with remon
-   ppcboot.bin should be programmed att offset 0x7e000 and the kernel at
-   offset 0. If you want to use a jffs2 root file system (not included here), 
+   u-boot.bin should be programmed att offset 0x7e000 and the kernel at
+   offset 0. If you want to use a jffs2 root file system (not included here),
    it should be  programmed to offset 0x100000.
-   
+
    remon> z
    remon> yi
-   remon> ns ppcboot.bin 7e0000
+   remon> ns u-boot.bin 7e0000
    remon> ns bzImage 0
    remon> ns image.jffs2 100000
 
 3) Connect a terminal to the 25pin serial port at 9600bps, and start the CDP.
-   
+
    remon> z
    remon> g
 
-4) PPCboot should output some message and a prompt on the terminal, to
+4) U-Boot should output some message and a prompt on the terminal, to
    start the kernel issue the following command:
-   
+
    BOOT> bootm
-   
+
 5) The kernel should boot, and mount the root filesystem if present.
 
 We hope you find this stuff useful
 Daniel Engström, Omicron Ceti AB, daniel@omicron.se
 
 
-
 --- linux-2.4.19-orig/init/do_mounts.c Sat Aug  3 02:39:46 2002
 +++ linux-2.4.19/init/do_mounts.c      Mon Sep 23 16:21:33 2002
 @@ -224,6 +224,14 @@
@@ -71,4 +70,5 @@ Daniel Engstr
 +      { "mtdblock7", 0x1f07 },
        { NULL, 0 }
  };
- 
+
+-------------------