* The ECC Code is licensed pursuant to the OpenSSL open source
* license provided below.
*
- * In addition, Sun covenants to all licensees who provide a reciprocal
- * covenant with respect to their own patents if any, not to sue under
- * current and future patent claims necessarily infringed by the making,
- * using, practicing, selling, offering for sale and/or otherwise
- * disposing of the ECC Code as delivered hereunder (or portions thereof),
- * provided that such covenant shall not apply:
- * 1) for code that a licensee deletes from the ECC Code;
- * 2) separates from the ECC Code; or
- * 3) for infringements caused by:
- * i) the modification of the ECC Code or
- * ii) the combination of the ECC Code with other software or
- * devices where such combination causes the infringement.
- *
* The software is originally written by Sheueling Chang Shantz and
* Douglas Stebila of Sun Microsystems Laboratories.
*
*/
/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved.
+ * Copyright (c) 1998-2003 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* coordinates.
* Uses algorithm Mdouble in appendix of
* Lopez, J. and Dahab, R. "Fast multiplication on elliptic curves over
- * GF(2^m) without precomputation".
+ * GF(2^m) without precomputation" (CHES '99, LNCS 1717).
* modified to not require precomputation of c=b^{2^{m-1}}.
*/
-static int Mdouble(const EC_GROUP *group, BIGNUM *x, BIGNUM *z, BN_CTX *ctx)
+static int gf2m_Mdouble(const EC_GROUP *group, BIGNUM *x, BIGNUM *z, BN_CTX *ctx)
{
BIGNUM *t1;
int ret = 0;
/* Compute the x-coordinate x1/z1 for the point (x1/z1)+(x2/x2) in Montgomery
* projective coordinates.
* Uses algorithm Madd in appendix of
- * Lopex, J. and Dahab, R. "Fast multiplication on elliptic curves over
- * GF(2^m) without precomputation".
+ * Lopez, J. and Dahab, R. "Fast multiplication on elliptic curves over
+ * GF(2^m) without precomputation" (CHES '99, LNCS 1717).
*/
-static int Madd(const EC_GROUP *group, const BIGNUM *x, BIGNUM *x1, BIGNUM *z1,
+static int gf2m_Madd(const EC_GROUP *group, const BIGNUM *x, BIGNUM *x1, BIGNUM *z1,
const BIGNUM *x2, const BIGNUM *z2, BN_CTX *ctx)
{
BIGNUM *t1, *t2;
return ret;
}
-/* Compute the affine coordinates x2, y2=z2 for the point (x1/z1) and (x2/x2) in
- * Montgomery projective coordinates.
- * Uses algorithm Mxy in appendix of
- * Lopex, J. and Dahab, R. "Fast multiplication on elliptic curves over
- * GF(2^m) without precomputation".
+/* Compute the x, y affine coordinates from the point (x1, z1) (x2, z2)
+ * using Montgomery point multiplication algorithm Mxy() in appendix of
+ * Lopez, J. and Dahab, R. "Fast multiplication on elliptic curves over
+ * GF(2^m) without precomputation" (CHES '99, LNCS 1717).
* Returns:
* 0 on error
* 1 if return value should be the point at infinity
* 2 otherwise
*/
-static int Mxy(const EC_GROUP *group, const BIGNUM *x, const BIGNUM *y, BIGNUM *x1,
+static int gf2m_Mxy(const EC_GROUP *group, const BIGNUM *x, const BIGNUM *y, BIGNUM *x1,
BIGNUM *z1, BIGNUM *x2, BIGNUM *z2, BN_CTX *ctx)
{
BIGNUM *t3, *t4, *t5;
if (BN_is_zero(z1))
{
- if (!BN_zero(x2)) return 0;
- if (!BN_zero(z2)) return 0;
+ BN_zero(x2);
+ BN_zero(z2);
return 1;
}
/* Computes scalar*point and stores the result in r.
* point can not equal r.
* Uses algorithm 2P of
- * Lopex, J. and Dahab, R. "Fast multiplication on elliptic curves over
- * GF(2^m) without precomputation".
+ * Lopez, J. and Dahab, R. "Fast multiplication on elliptic curves over
+ * GF(2^m) without precomputation" (CHES '99, LNCS 1717).
*/
-static int point_multiply(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
+static int ec_GF2m_montgomery_point_multiply(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
const EC_POINT *point, BN_CTX *ctx)
{
BIGNUM *x1, *x2, *z1, *z2;
- int ret = 0, i, j;
- BN_ULONG mask;
+ int ret = 0, i;
+ BN_ULONG mask,word;
if (r == point)
{
- ECerr(EC_F_EC_POINT_MUL, EC_R_INVALID_ARGUMENT);
+ ECerr(EC_F_EC_GF2M_MONTGOMERY_POINT_MULTIPLY, EC_R_INVALID_ARGUMENT);
return 0;
}
if (!BN_GF2m_add(x2, x2, &group->b)) goto err; /* x2 = x^4 + b */
/* find top most bit and go one past it */
- i = scalar->top - 1; j = BN_BITS2 - 1;
+ i = scalar->top - 1;
mask = BN_TBIT;
- while (!(scalar->d[i] & mask)) { mask >>= 1; j--; }
- mask >>= 1; j--;
+ word = scalar->d[i];
+ while (!(word & mask)) mask >>= 1;
+ mask >>= 1;
/* if top most bit was at word break, go to next word */
if (!mask)
{
- i--; j = BN_BITS2 - 1;
+ i--;
mask = BN_TBIT;
}
for (; i >= 0; i--)
{
- for (; j >= 0; j--)
+ word = scalar->d[i];
+ while (mask)
{
- if (scalar->d[i] & mask)
+ if (word & mask)
{
- if (!Madd(group, &point->X, x1, z1, x2, z2, ctx)) goto err;
- if (!Mdouble(group, x2, z2, ctx)) goto err;
+ if (!gf2m_Madd(group, &point->X, x1, z1, x2, z2, ctx)) goto err;
+ if (!gf2m_Mdouble(group, x2, z2, ctx)) goto err;
}
else
{
- if (!Madd(group, &point->X, x2, z2, x1, z1, ctx)) goto err;
- if (!Mdouble(group, x1, z1, ctx)) goto err;
+ if (!gf2m_Madd(group, &point->X, x2, z2, x1, z1, ctx)) goto err;
+ if (!gf2m_Mdouble(group, x1, z1, ctx)) goto err;
}
mask >>= 1;
}
- j = BN_BITS2 - 1;
mask = BN_TBIT;
}
/* convert out of "projective" coordinates */
- i = Mxy(group, &point->X, &point->Y, x1, z1, x2, z2, ctx);
+ i = gf2m_Mxy(group, &point->X, &point->Y, x1, z1, x2, z2, ctx);
if (i == 0) goto err;
else if (i == 1)
{
}
/* GF(2^m) field elements should always have BIGNUM::neg = 0 */
- r->X.neg = 0;
- r->Y.neg = 0;
+ BN_set_negative(&r->X, 0);
+ BN_set_negative(&r->Y, 0);
ret = 1;
* scalar*group->generator + scalars[0]*points[0] + ... + scalars[num-1]*points[num-1]
* gracefully ignoring NULL scalar values.
*/
-int ec_GF2m_mont_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
+int ec_GF2m_simple_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
size_t num, const EC_POINT *points[], const BIGNUM *scalars[], BN_CTX *ctx)
{
BN_CTX *new_ctx = NULL;
- int ret = 0, i;
+ int ret = 0;
+ size_t i;
EC_POINT *p=NULL;
if (ctx == NULL)
}
/* This implementation is more efficient than the wNAF implementation for 2
- * or fewer points. Use the ec_wNAF_mul implementation for 3 or more points.
+ * or fewer points. Use the ec_wNAF_mul implementation for 3 or more points,
+ * or if we can perform a fast multiplication based on precomputation.
*/
- if ((scalar && (num > 1)) || (num > 2))
+ if ((scalar && (num > 1)) || (num > 2) || (num == 0 && EC_GROUP_have_precompute_mult(group)))
{
ret = ec_wNAF_mul(group, r, scalar, num, points, scalars, ctx);
goto err;
if (scalar)
{
- if (!point_multiply(group, p, scalar, group->generator, ctx)) goto err;
- if (scalar->neg) if (!group->meth->invert(group, p, ctx)) goto err;
+ if (!ec_GF2m_montgomery_point_multiply(group, p, scalar, group->generator, ctx)) goto err;
+ if (BN_is_negative(scalar))
+ if (!group->meth->invert(group, p, ctx)) goto err;
if (!group->meth->add(group, r, r, p, ctx)) goto err;
}
for (i = 0; i < num; i++)
{
- if (!point_multiply(group, p, scalars[i], points[i], ctx)) goto err;
- if (scalars[i]->neg) if (!group->meth->invert(group, p, ctx)) goto err;
+ if (!ec_GF2m_montgomery_point_multiply(group, p, scalars[i], points[i], ctx)) goto err;
+ if (BN_is_negative(scalars[i]))
+ if (!group->meth->invert(group, p, ctx)) goto err;
if (!group->meth->add(group, r, r, p, ctx)) goto err;
}
}
-/* Precomputation for point multiplication. */
-int ec_GF2m_mont_precompute_mult(EC_GROUP *group, BN_CTX *ctx)
+/* Precomputation for point multiplication: fall back to wNAF methods
+ * because ec_GF2m_simple_mul() uses ec_wNAF_mul() if appropriate */
+
+int ec_GF2m_precompute_mult(EC_GROUP *group, BN_CTX *ctx)
{
- /* There is no precomputation to do for Montgomery scalar multiplication but
- * since this implementation falls back to the wNAF multiplication for more than
- * two points, call the wNAF implementation's precompute.
- */
return ec_wNAF_precompute_mult(group, ctx);
- }
+ }
+
+int ec_GF2m_have_precompute_mult(const EC_GROUP *group)
+ {
+ return ec_wNAF_have_precompute_mult(group);
+ }