-/* crypto/ct/ct_locl.h */
/*
- * Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL project
- * 2015.
- */
-/* ====================================================================
- * Copyright (c) 2015 The OpenSSL Project. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- * software must display the following acknowledgment:
- * "This product includes software developed by the OpenSSL Project
- * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- * endorse or promote products derived from this software without
- * prior written permission. For written permission, please contact
- * licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- * nor may "OpenSSL" appear in their names without prior written
- * permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- * acknowledgment:
- * "This product includes software developed by the OpenSSL Project
- * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
+ * Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
*
+ * Licensed under the Apache License 2.0 (the "License"). You may not use
+ * this file except in compliance with the License. You can obtain a copy
+ * in the file LICENSE in the source distribution or at
+ * https://www.openssl.org/source/license.html
*/
-#ifndef HEADER_CT_LOCL_H
-# define HEADER_CT_LOCL_H
-
-# ifdef __cplusplus
-extern "C" {
-# endif
-# ifndef OPENSSL_NO_CT
-
-/* All hashes are currently SHA256 */
-# define SCT_V1_HASHLEN 32
-/* Minimum RSA key size, from RFC6962 */
-# define SCT_MIN_RSA_BITS 2048
+#include <stddef.h>
+#include <openssl/ct.h>
+#include <openssl/evp.h>
+#include <openssl/x509.h>
+#include <openssl/x509v3.h>
+#include <openssl/safestack.h>
/*
* From RFC6962: opaque SerializedSCT<1..2^16-1>; struct { SerializedSCT
* sct_list <1..2^16-1>; } SignedCertificateTimestampList;
*/
+# define MAX_SCT_SIZE 65535
+# define MAX_SCT_LIST_SIZE MAX_SCT_SIZE
+
+/*
+ * Macros to read and write integers in network-byte order.
+ */
+
+#define n2s(c,s) ((s=(((unsigned int)((c)[0]))<< 8)| \
+ (((unsigned int)((c)[1])) )),c+=2)
+
+#define s2n(s,c) ((c[0]=(unsigned char)(((s)>> 8)&0xff), \
+ c[1]=(unsigned char)(((s) )&0xff)),c+=2)
-# define MAX_SCT_SIZE 65535
-# define MAX_SCT_LIST_SIZE MAX_SCT_SIZE
+#define l2n3(l,c) ((c[0]=(unsigned char)(((l)>>16)&0xff), \
+ c[1]=(unsigned char)(((l)>> 8)&0xff), \
+ c[2]=(unsigned char)(((l) )&0xff)),c+=3)
-typedef enum {
- UNSET_ENTRY = -1,
- X509_ENTRY = 0,
- PRECERT_ENTRY = 1
-} log_entry_type_t;
+#define n2l8(c,l) (l =((uint64_t)(*((c)++)))<<56, \
+ l|=((uint64_t)(*((c)++)))<<48, \
+ l|=((uint64_t)(*((c)++)))<<40, \
+ l|=((uint64_t)(*((c)++)))<<32, \
+ l|=((uint64_t)(*((c)++)))<<24, \
+ l|=((uint64_t)(*((c)++)))<<16, \
+ l|=((uint64_t)(*((c)++)))<< 8, \
+ l|=((uint64_t)(*((c)++))))
-typedef enum {
- UNSET_VERSION = -1,
- SCT_V1 = 0
-} sct_version_t;
+#define l2n8(l,c) (*((c)++)=(unsigned char)(((l)>>56)&0xff), \
+ *((c)++)=(unsigned char)(((l)>>48)&0xff), \
+ *((c)++)=(unsigned char)(((l)>>40)&0xff), \
+ *((c)++)=(unsigned char)(((l)>>32)&0xff), \
+ *((c)++)=(unsigned char)(((l)>>24)&0xff), \
+ *((c)++)=(unsigned char)(((l)>>16)&0xff), \
+ *((c)++)=(unsigned char)(((l)>> 8)&0xff), \
+ *((c)++)=(unsigned char)(((l) )&0xff))
-typedef struct {
+/* Signed Certificate Timestamp */
+struct sct_st {
sct_version_t version;
- /* If version is not SCT_V1 this contains the encoded SCT */
+ /* If version is not SCT_VERSION_V1, this contains the encoded SCT */
unsigned char *sct;
size_t sct_len;
- /*
- * If version is SCT_V1 fields below contain components of the SCT. "logid",
- * "ext" and "sig" point to buffers allocated with OPENSSL_malloc().
- */
+ /* If version is SCT_VERSION_V1, fields below contain components of the SCT */
unsigned char *log_id;
size_t log_id_len;
-
/*
- * Note, we cannot distinguish between an unset timestamp, and one
- * that is set to 0. However since CT didn't exist in 1970, no real
- * SCT should ever be set as such.
- */
+ * Note, we cannot distinguish between an unset timestamp, and one
+ * that is set to 0. However since CT didn't exist in 1970, no real
+ * SCT should ever be set as such.
+ */
uint64_t timestamp;
unsigned char *ext;
size_t ext_len;
unsigned char *sig;
size_t sig_len;
/* Log entry type */
- log_entry_type_t entry_type;
-} SCT;
+ ct_log_entry_type_t entry_type;
+ /* Where this SCT was found, e.g. certificate, OCSP response, etc. */
+ sct_source_t source;
+ /* The result of the last attempt to validate this SCT. */
+ sct_validation_status_t validation_status;
+};
-DECLARE_STACK_OF(SCT)
+/* Miscellaneous data that is useful when verifying an SCT */
+struct sct_ctx_st {
+ /* Public key */
+ EVP_PKEY *pkey;
+ /* Hash of public key */
+ unsigned char *pkeyhash;
+ size_t pkeyhashlen;
+ /* For pre-certificate: issuer public key hash */
+ unsigned char *ihash;
+ size_t ihashlen;
+ /* certificate encoding */
+ unsigned char *certder;
+ size_t certderlen;
+ /* pre-certificate encoding */
+ unsigned char *preder;
+ size_t prederlen;
+ /* milliseconds since epoch (to check that the SCT isn't from the future) */
+ uint64_t epoch_time_in_ms;
+};
-/*
- * Allocate new SCT.
- * Caller is responsible for calling SCT_free when done.
- */
-SCT *SCT_new(void);
+/* Context when evaluating whether a Certificate Transparency policy is met */
+struct ct_policy_eval_ctx_st {
+ X509 *cert;
+ X509 *issuer;
+ CTLOG_STORE *log_store;
+ /* milliseconds since epoch (to check that SCTs aren't from the future) */
+ uint64_t epoch_time_in_ms;
+};
/*
- * Free SCT and underlying datastructures.
+ * Creates a new context for verifying an SCT.
*/
-void SCT_free(SCT *sct);
-
+SCT_CTX *SCT_CTX_new(void);
/*
- * Set the version of an SCT.
- * Returns 1 on success, 0 if the version is unrecognized.
+ * Deletes an SCT verification context.
*/
-int SCT_set_version(SCT *sct, sct_version_t version);
+void SCT_CTX_free(SCT_CTX *sctx);
/*
- * Set the log entry type of an SCT.
- * Returns 1 on success.
+ * Sets the certificate that the SCT was created for.
+ * If *cert does not have a poison extension, presigner must be NULL.
+ * If *cert does not have a poison extension, it may have a single SCT
+ * (NID_ct_precert_scts) extension.
+ * If either *cert or *presigner have an AKID (NID_authority_key_identifier)
+ * extension, both must have one.
+ * Returns 1 on success, 0 on failure.
*/
-int SCT_set_log_entry_type(SCT *sct, log_entry_type_t entry_type);
+__owur int SCT_CTX_set1_cert(SCT_CTX *sctx, X509 *cert, X509 *presigner);
/*
- * Set the log id of an SCT to point directly to the *logid specified.
- * The SCT takes ownership of the specified pointer.
- * Returns 1 on success.
+ * Sets the issuer of the certificate that the SCT was created for.
+ * This is just a convenience method to save extracting the public key and
+ * calling SCT_CTX_set1_issuer_pubkey().
+ * Issuer must not be NULL.
+ * Returns 1 on success, 0 on failure.
*/
-int SCT_set0_log_id(SCT *sct, unsigned char *log_id, size_t log_id_len);
+__owur int SCT_CTX_set1_issuer(SCT_CTX *sctx, const X509 *issuer);
/*
- * Set the timestamp of an SCT.
+ * Sets the public key of the issuer of the certificate that the SCT was created
+ * for.
+ * The public key must not be NULL.
+ * Returns 1 on success, 0 on failure.
*/
-void SCT_set_timestamp(SCT *sct, uint64_t timestamp);
+__owur int SCT_CTX_set1_issuer_pubkey(SCT_CTX *sctx, X509_PUBKEY *pubkey);
/*
- * Set the signature type of an SCT
- * Currently NID_sha256WithRSAEncryption or NID_ecdsa_with_SHA256.
- * Returns 1 on success.
+ * Sets the public key of the CT log that the SCT is from.
+ * Returns 1 on success, 0 on failure.
*/
-int SCT_set_signature_nid(SCT *sct, int nid);
+__owur int SCT_CTX_set1_pubkey(SCT_CTX *sctx, X509_PUBKEY *pubkey);
/*
- * Set the extensions of an SCT to point directly to the *ext specified.
- * The SCT takes ownership of the specified pointer.
+ * Sets the time to evaluate the SCT against, in milliseconds since the Unix
+ * epoch. If the SCT's timestamp is after this time, it will be interpreted as
+ * having been issued in the future. RFC6962 states that "TLS clients MUST
+ * reject SCTs whose timestamp is in the future", so an SCT will not validate
+ * in this case.
*/
-void SCT_set0_extensions(SCT *sct, unsigned char *ext, size_t ext_len);
+void SCT_CTX_set_time(SCT_CTX *sctx, uint64_t time_in_ms);
/*
- * Set the signature of an SCT to point directly to the *sig specified.
- * The SCT takes ownership of the specified pointer.
+ * Verifies an SCT with the given context.
+ * Returns 1 if the SCT verifies successfully; any other value indicates
+ * failure. See EVP_DigestVerifyFinal() for the meaning of those values.
*/
-void SCT_set0_signature(SCT *sct, unsigned char *sig, size_t sig_len);
+__owur int SCT_CTX_verify(const SCT_CTX *sctx, const SCT *sct);
/*
- * Returns the version of the SCT.
+ * Does this SCT have the minimum fields populated to be usable?
+ * Returns 1 if so, 0 otherwise.
*/
-sct_version_t SCT_get_version(const SCT *sct);
+__owur int SCT_is_complete(const SCT *sct);
/*
- * Returns the log entry type of the SCT.
+ * Does this SCT have the signature-related fields populated?
+ * Returns 1 if so, 0 otherwise.
+ * This checks that the signature and hash algorithms are set to supported
+ * values and that the signature field is set.
*/
-log_entry_type_t SCT_get_log_entry_type(const SCT *sct);
+__owur int SCT_signature_is_complete(const SCT *sct);
/*
- * Set *logid to point to the log id for the SCT. logid must not be NULL.
- * The SCT retains ownership of this pointer.
- * Returns length of the data pointed to.
+ * TODO(RJPercival): Create an SCT_signature struct and make i2o_SCT_signature
+ * and o2i_SCT_signature conform to the i2d/d2i conventions.
*/
-size_t SCT_get0_log_id(const SCT *sct, unsigned char **log_id);
/*
- * Returns the timestamp for the SCT.
- */
-uint64_t SCT_get_timestamp(const SCT *sct);
+* Serialize (to TLS format) an |sct| signature and write it to |out|.
+* If |out| is null, no signature will be output but the length will be returned.
+* If |out| points to a null pointer, a string will be allocated to hold the
+* TLS-format signature. It is the responsibility of the caller to free it.
+* If |out| points to an allocated string, the signature will be written to it.
+* The length of the signature in TLS format will be returned.
+*/
+__owur int i2o_SCT_signature(const SCT *sct, unsigned char **out);
/*
- * Return the nid for the signature used by the SCT.
- * Currently NID_sha256WithRSAEncryption or NID_ecdsa_with_SHA256 (or NID_undef)
- */
-int SCT_get_signature_nid(const SCT *sct);
-
-/*
- * Set *ext to point to the extension data for the SCT. ext must not be NULL.
- * The SCT retains ownership of this pointer.
- * Returns length of the data pointed to.
- */
-size_t SCT_get0_extensions(const SCT *sct, unsigned char **ext);
-
-/*
- * Set *sig to point to the signature for the SCT. sig must not be NULL.
- * The SCT retains ownership of this pointer.
- * Returns length of the data pointed to.
- */
-size_t SCT_get0_signature(const SCT *sct, unsigned char **sig);
-
-
-# endif
+* Parses an SCT signature in TLS format and populates the |sct| with it.
+* |in| should be a pointer to a string containing the TLS-format signature.
+* |in| will be advanced to the end of the signature if parsing succeeds.
+* |len| should be the length of the signature in |in|.
+* Returns the number of bytes parsed, or a negative integer if an error occurs.
+* If an error occurs, the SCT's signature NID may be updated whilst the
+* signature field itself remains unset.
+*/
+__owur int o2i_SCT_signature(SCT *sct, const unsigned char **in, size_t len);
-/* BEGIN ERROR CODES */
/*
- * The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
+ * Handlers for Certificate Transparency X509v3/OCSP extensions
*/
-void ERR_load_CT_strings(void);
-
-/* Error codes for the CT functions. */
-
-/* Function codes. */
-# define CT_F_SCT_NEW 100
-# define CT_F_SCT_SET0_LOG_ID 101
-# define CT_F_SCT_SET_LOG_ENTRY_TYPE 102
-# define CT_F_SCT_SET_SIGNATURE_NID 103
-# define CT_F_SCT_SET_VERSION 104
-
-/* Reason codes. */
-# define CT_R_INVALID_LOG_ID_LENGTH 100
-# define CT_R_UNRECOGNIZED_SIGNATURE_NID 101
-# define CT_R_UNSUPPORTED_ENTRY_TYPE 102
-# define CT_R_UNSUPPORTED_VERSION 103
-
-#ifdef __cplusplus
-}
-#endif
-#endif
+extern const X509V3_EXT_METHOD v3_ct_scts[3];