* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
+/* ====================================================================
+ * Copyright (c) 1998-2000 The OpenSSL Project. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ * software must display the following acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ * endorse or promote products derived from this software without
+ * prior written permission. For written permission, please contact
+ * openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ * nor may "OpenSSL" appear in their names without prior written
+ * permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ * acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com). This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
#ifndef HEADER_BN_LCL_H
#define HEADER_BN_LCL_H
extern "C" {
#endif
+
+/* Used for temp variables */
+#define BN_CTX_NUM 32
+#define BN_CTX_NUM_POS 12
+struct bignum_ctx
+ {
+ int tos;
+ BIGNUM bn[BN_CTX_NUM];
+ int flags;
+ int depth;
+ int pos[BN_CTX_NUM_POS];
+ int too_many;
+ } /* BN_CTX */;
+
+
+/*
+ * BN_window_bits_for_exponent_size -- macro for sliding window mod_exp functions
+ *
+ *
+ * For window size 'w' (w >= 2) and a random 'b' bits exponent,
+ * the number of multiplications is a constant plus on average
+ *
+ * 2^(w-1) + (b-w)/(w+1);
+ *
+ * here 2^(w-1) is for precomputing the table (we actually need
+ * entries only for windows that have the lowest bit set), and
+ * (b-w)/(w+1) is an approximation for the expected number of
+ * w-bit windows, not counting the first one.
+ *
+ * Thus we should use
+ *
+ * w >= 6 if b > 671
+ * w = 5 if 671 > b > 239
+ * w = 4 if 239 > b > 79
+ * w = 3 if 79 > b > 23
+ * w <= 2 if 23 > b
+ *
+ * (with draws in between). Very small exponents are often selected
+ * with low Hamming weight, so we use w = 1 for b <= 23.
+ */
+#if 1
+#define BN_window_bits_for_exponent_size(b) \
+ ((b) > 671 ? 6 : \
+ (b) > 239 ? 5 : \
+ (b) > 79 ? 4 : \
+ (b) > 23 ? 3 : 1)
+#else
+/* Old SSLeay/OpenSSL table.
+ * Maximum window size was 5, so this table differs for b==1024;
+ * but it coincides for other interesting values (b==160, b==512).
+ */
+#define BN_window_bits_for_exponent_size(b) \
+ ((b) > 255 ? 5 : \
+ (b) > 127 ? 4 : \
+ (b) > 17 ? 3 : 1)
+#endif
+
+
+
/* Pentium pro 16,16,16,32,64 */
/* Alpha 16,16,16,16.64 */
#define BN_MULL_SIZE_NORMAL (16) /* 32 */
#define BN_MUL_LOW_RECURSIVE_SIZE_NORMAL (32) /* 32 */
#define BN_MONT_CTX_SET_SIZE_WORD (64) /* 32 */
-#if 0
-#ifndef BN_MUL_COMBA
-/* #define bn_mul_comba8(r,a,b) bn_mul_normal(r,a,8,b,8) */
-/* #define bn_mul_comba4(r,a,b) bn_mul_normal(r,a,4,b,4) */
-#endif
-
-#ifndef BN_SQR_COMBA
-/* This is probably faster than using the C code - I need to check */
-#define bn_sqr_comba8(r,a) bn_mul_normal(r,a,8,a,8)
-#define bn_sqr_comba4(r,a) bn_mul_normal(r,a,4,a,4)
-#endif
-#endif
-
-#if !defined(NO_ASM) && !defined(PEDANTIC)
+#if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) && !defined(PEDANTIC)
/*
* BN_UMULT_HIGH section.
*
ret; })
# endif /* compiler */
# endif /* cpu */
-#endif /* NO_ASM */
+#endif /* OPENSSL_NO_ASM */
/*************************************************************
* Using the long long type
#define Lw(t) (((BN_ULONG)(t))&BN_MASK2)
#define Hw(t) (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2)
-/* These are used for internal error checking and are not normally used */
+/* This is used for internal error checking and is not normally used */
#ifdef BN_DEBUG
-#define bn_check_top(a) \
- { if (((a)->top < 0) || ((a)->top > (a)->max)) \
- { char *nullp=NULL; *nullp='z'; } }
-#define bn_check_num(a) if ((a) < 0) { char *nullp=NULL; *nullp='z'; }
+# include <assert.h>
+# define bn_check_top(a) assert ((a)->top >= 0 && (a)->top <= (a)->dmax);
#else
-#define bn_check_top(a)
-#define bn_check_num(a)
+# define bn_check_top(a)
#endif
/* This macro is to add extra stuff for development checking */
bn_set_max(r); \
}
-/* #define bn_expand(n,b) ((((b)/BN_BITS2) <= (n)->max)?(n):bn_expand2((n),(b))) */
-
#ifdef BN_LLONG
#define mul_add(r,a,w,c) { \
BN_ULLONG t; \
BN_ULLONG t; \
t=(BN_ULLONG)(a)*(a); \
(r0)=Lw(t); \
- (r1)=Hw(t); ]
+ (r1)=Hw(t); \
}
#elif defined(BN_UMULT_HIGH)
(c)=h&BN_MASK2; \
(r)=l&BN_MASK2; \
}
-
-#endif
-
-OPENSSL_EXTERN int bn_limit_bits;
-OPENSSL_EXTERN int bn_limit_num; /* (1<<bn_limit_bits) */
-/* Recursive 'low' limit */
-OPENSSL_EXTERN int bn_limit_bits_low;
-OPENSSL_EXTERN int bn_limit_num_low; /* (1<<bn_limit_bits_low) */
-/* Do modified 'high' part calculation' */
-OPENSSL_EXTERN int bn_limit_bits_high;
-OPENSSL_EXTERN int bn_limit_num_high; /* (1<<bn_limit_bits_high) */
-OPENSSL_EXTERN int bn_limit_bits_mont;
-OPENSSL_EXTERN int bn_limit_num_mont; /* (1<<bn_limit_bits_mont) */
-
-BIGNUM *bn_expand2(BIGNUM *b, int bits);
+#endif /* !BN_LLONG */
void bn_mul_normal(BN_ULONG *r,BN_ULONG *a,int na,BN_ULONG *b,int nb);
void bn_mul_comba8(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);
void bn_mul_comba4(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);
-void bn_sqr_normal(BN_ULONG *r, BN_ULONG *a, int n, BN_ULONG *tmp);
-void bn_sqr_comba8(BN_ULONG *r,BN_ULONG *a);
-void bn_sqr_comba4(BN_ULONG *r,BN_ULONG *a);
-int bn_cmp_words(BN_ULONG *a,BN_ULONG *b,int n);
-void bn_mul_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,BN_ULONG *t);
+void bn_sqr_normal(BN_ULONG *r, const BN_ULONG *a, int n, BN_ULONG *tmp);
+void bn_sqr_comba8(BN_ULONG *r,const BN_ULONG *a);
+void bn_sqr_comba4(BN_ULONG *r,const BN_ULONG *a);
+int bn_cmp_words(const BN_ULONG *a,const BN_ULONG *b,int n);
+int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b,
+ int cl, int dl);
+void bn_mul_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,
+ int dna,int dnb,BN_ULONG *t);
void bn_mul_part_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,
- int tn, int n,BN_ULONG *t);
-void bn_sqr_recursive(BN_ULONG *r,BN_ULONG *a, int n2, BN_ULONG *t);
+ int n,int tna,int tnb,BN_ULONG *t);
+void bn_sqr_recursive(BN_ULONG *r,const BN_ULONG *a, int n2, BN_ULONG *t);
void bn_mul_low_normal(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b, int n);
void bn_mul_low_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,
BN_ULONG *t);
void bn_mul_high(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,BN_ULONG *l,int n2,
BN_ULONG *t);
+BN_ULONG bn_add_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
+ int cl, int dl);
+BN_ULONG bn_sub_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
+ int cl, int dl);
#ifdef __cplusplus
}