+/* BN_mod_exp_mont_conttime is based on the assumption that the
+ * L1 data cache line width of the target processor is at least
+ * the following value.
+ */
+#define MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH ( 64 )
+#define MOD_EXP_CTIME_MIN_CACHE_LINE_MASK (MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - 1)
+
+/* Window sizes optimized for fixed window size modular exponentiation
+ * algorithm (BN_mod_exp_mont_consttime).
+ *
+ * To achieve the security goals of BN_mode_exp_mont_consttime, the
+ * maximum size of the window must not exceed
+ * log_2(MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH).
+ *
+ * Window size thresholds are defined for cache line sizes of 32 and 64,
+ * cache line sizes where log_2(32)=5 and log_2(64)=6 respectively. A
+ * window size of 7 should only be used on processors that have a 128
+ * byte or greater cache line size.
+ */
+#if MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 64
+
+# define BN_window_bits_for_ctime_exponent_size(b) \
+ ((b) > 937 ? 6 : \
+ (b) > 306 ? 5 : \
+ (b) > 89 ? 4 : \
+ (b) > 22 ? 3 : 1)
+# define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (6)
+
+#elif MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 32
+
+# define BN_window_bits_for_ctime_exponent_size(b) \
+ ((b) > 306 ? 5 : \
+ (b) > 89 ? 4 : \
+ (b) > 22 ? 3 : 1)
+# define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (5)
+
+#endif
+
+
/* Pentium pro 16,16,16,32,64 */
/* Alpha 16,16,16,16.64 */
#define BN_MULL_SIZE_NORMAL (16) /* 32 */
#define BN_MUL_LOW_RECURSIVE_SIZE_NORMAL (32) /* 32 */
#define BN_MONT_CTX_SET_SIZE_WORD (64) /* 32 */
-#if !defined(NO_ASM) && !defined(NO_INLINE_ASM) && !defined(PEDANTIC)
+#if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) && !defined(PEDANTIC)
/*
* BN_UMULT_HIGH section.
*
: "r"(a), "r"(b)); \
ret; })
# endif /* compiler */
+# elif defined(__x86_64) && defined(SIXTY_FOUR_BIT_LONG)
+# if defined(__GNUC__)
+# define BN_UMULT_HIGH(a,b) ({ \
+ register BN_ULONG ret,discard; \
+ asm ("mulq %3" \
+ : "=a"(discard),"=d"(ret) \
+ : "a"(a), "g"(b) \
+ : "cc"); \
+ ret; })
+# define BN_UMULT_LOHI(low,high,a,b) \
+ asm ("mulq %3" \
+ : "=a"(low),"=d"(high) \
+ : "a"(a),"g"(b) \
+ : "cc");
+# endif
# endif /* cpu */
-#endif /* NO_ASM */
+#endif /* OPENSSL_NO_ASM */
/*************************************************************
* Using the long long type
#define Lw(t) (((BN_ULONG)(t))&BN_MASK2)
#define Hw(t) (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2)
-/* This is used for internal error checking and is not normally used */
-#ifdef BN_DEBUG
-# include <assert.h>
-# define bn_check_top(a) assert ((a)->top >= 0 && (a)->top <= (a)->dmax);
-#else
-# define bn_check_top(a)
-#endif
-
-/* This macro is to add extra stuff for development checking */
-#ifdef BN_DEBUG
-#define bn_set_max(r) ((r)->max=(r)->top,BN_set_flags((r),BN_FLG_STATIC_DATA))
-#else
-#define bn_set_max(r)
-#endif
-
-/* These macros are used to 'take' a section of a bignum for read only use */
-#define bn_set_low(r,a,n) \
+#ifdef BN_DEBUG_RAND
+#define bn_clear_top2max(a) \
{ \
- (r)->top=((a)->top > (n))?(n):(a)->top; \
- (r)->d=(a)->d; \
- (r)->neg=(a)->neg; \
- (r)->flags|=BN_FLG_STATIC_DATA; \
- bn_set_max(r); \
- }
-
-#define bn_set_high(r,a,n) \
- { \
- if ((a)->top > (n)) \
- { \
- (r)->top=(a)->top-n; \
- (r)->d= &((a)->d[n]); \
- } \
- else \
- (r)->top=0; \
- (r)->neg=(a)->neg; \
- (r)->flags|=BN_FLG_STATIC_DATA; \
- bn_set_max(r); \
+ int ind = (a)->dmax - (a)->top; \
+ BN_ULONG *ftl = &(a)->d[(a)->top-1]; \
+ for (; ind != 0; ind--) \
+ *(++ftl) = 0x0; \
}
+#else
+#define bn_clear_top2max(a)
+#endif
#ifdef BN_LLONG
#define mul_add(r,a,w,c) { \
#define LBITS(a) ((a)&BN_MASK2l)
#define HBITS(a) (((a)>>BN_BITS4)&BN_MASK2l)
-#define L2HBITS(a) ((BN_ULONG)((a)&BN_MASK2l)<<BN_BITS4)
+#define L2HBITS(a) (((a)<<BN_BITS4)&BN_MASK2)
#define LLBITS(a) ((a)&BN_MASKl)
#define LHBITS(a) (((a)>>BN_BITS2)&BN_MASKl)
lt=(bl)*(lt); \
m1=(bl)*(ht); \
ht =(bh)*(ht); \
- m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS(1L); \
+ m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS((BN_ULONG)1); \
ht+=HBITS(m); \
m1=L2HBITS(m); \
lt=(lt+m1)&BN_MASK2; if (lt < m1) ht++; \
int bn_cmp_words(const BN_ULONG *a,const BN_ULONG *b,int n);
int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b,
int cl, int dl);
-void bn_mul_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,BN_ULONG *t);
+void bn_mul_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,
+ int dna,int dnb,BN_ULONG *t);
void bn_mul_part_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,
- int tn, int n,BN_ULONG *t);
+ int n,int tna,int tnb,BN_ULONG *t);
void bn_sqr_recursive(BN_ULONG *r,const BN_ULONG *a, int n2, BN_ULONG *t);
void bn_mul_low_normal(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b, int n);
void bn_mul_low_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,
BN_ULONG *t);
void bn_mul_high(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,BN_ULONG *l,int n2,
BN_ULONG *t);
+BN_ULONG bn_add_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
+ int cl, int dl);
+BN_ULONG bn_sub_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
+ int cl, int dl);
#ifdef __cplusplus
}