/*
- * (C) Copyright 2006 - 2007
+ * (C) Copyright 2006 - 2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (c) 2005 Cisco Systems. All rights reserved.
#include <common.h>
#include <pci.h>
-#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX)) && \
+#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
defined(CONFIG_PCI)
#include <asm/4xx_pcie.h>
int err = 0;
/* SDR0_PEGPLLLCT1 reset */
- if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
+ if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000))
printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0);
- }
valPE0 = SDR_READ(PESDR0_RCSSET);
valPE1 = SDR_READ(PESDR1_RCSSET);
}
return 0;
}
-#else
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+static void ppc4xx_setup_utl(u32 port)
+{
+ volatile void *utl_base = NULL;
+
+ /*
+ * Map UTL registers at 0x0801_n000 (4K 0xfff mask) PEGPLn_REGMSK
+ */
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CFG_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CFG_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* BAM 11100000=4KB */
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
+ break;
+
+ case 1:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CFG_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CFG_PCIE0_UTLBASE)
+ + 0x1000);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* BAM 11100000=4KB */
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
+ break;
+ }
+ utl_base = (unsigned int *)(CFG_PCIE_BASE + 0x1000 * port);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(utl_base + PEUTL_PBCTL, 0x0800000c); /* PLBME, CRRE */
+ out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000); /* OPD = 512 Bytes */
+ out_be32(utl_base + PEUTL_PBBSZ, 0x00000000); /* Max 512 Bytes */
+ out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000);
+ out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000); /* IPD = 512 Bytes */
+ out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(utl_base + PEUTL_PCTL, 0x80800066); /* VRB,TXE,timeout=default */
+}
+
+/*
+ * TODO: double check PCI express SDR based on the latest user manual
+ * Some registers specified here no longer exist.. has to be
+ * updated based on the final EAS spec.
+ */
+static int check_error(void)
+{
+ u32 valPE0, valPE1;
+ int err = 0;
+
+ valPE0 = SDR_READ(SDRN_PESDR_RCSSET(0));
+ valPE1 = SDR_READ(SDRN_PESDR_RCSSET(1));
+
+ /* SDR0_PExRCSSET rstgu */
+ if (!(valPE0 & PESDRx_RCSSET_RSTGU) || !(valPE1 & PESDRx_RCSSET_RSTGU)) {
+ printf("PCIE: SDR0_PExRCSSET rstgu error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstdl */
+ if (!(valPE0 & PESDRx_RCSSET_RSTDL) || !(valPE1 & PESDRx_RCSSET_RSTDL)) {
+ printf("PCIE: SDR0_PExRCSSET rstdl error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstpyn */
+ if ((valPE0 & PESDRx_RCSSET_RSTPYN) || (valPE1 & PESDRx_RCSSET_RSTPYN)) {
+ printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET hldplb */
+ if ((valPE0 & PESDRx_RCSSET_HLDPLB) || (valPE1 & PESDRx_RCSSET_HLDPLB)) {
+ printf("PCIE: SDR0_PExRCSSET hldplb error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rdy */
+ if ((valPE0 & PESDRx_RCSSET_RDY) || (valPE1 & PESDRx_RCSSET_RDY)) {
+ printf("PCIE: SDR0_PExRCSSET rdy error\n");
+ err = -1;
+ }
+
+ return err;
+}
+
+/*
+ * Initialize PCI Express core as described in User Manual
+ * TODO: double check PE SDR PLL Register with the updated user manual.
+ */
+int ppc4xx_init_pcie(void)
+{
+ if (check_error())
+ return -1;
+
+ return 0;
+}
+#endif /* CONFIG_460EX */
+
+#if defined(CONFIG_405EX)
static void ppc4xx_setup_utl(u32 port)
{
u32 utl_base;
case 0:
mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x00000000);
mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CFG_PCIE0_UTLBASE);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0xfffffc01); /* 4k region, valid */
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* 4k region, valid */
mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
break;
case 1:
mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x00000000);
mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CFG_PCIE1_UTLBASE);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0xfffffc01); /* 4k region, valid */
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* 4k region, valid */
mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
break;
*/
return 0;
}
-#endif
+#endif /* CONFIG_405EX */
/*
* Board-specific pcie initialization
}
#endif /* CONFIG_440SPE */
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+int __ppc4xx_init_pcie_port_hw(int port, int rootport)
+{
+ u32 val = 1 << 24;
+ u32 utlset1;
+
+ if (rootport) {
+ val = PTYPE_ROOT_PORT << 20;
+ utlset1 = 0x21222222;
+ } else {
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ utlset1 = 0x20222222;
+ }
+
+ if (port == 0) {
+ val |= LNKW_X1 << 12;
+ } else {
+ val |= LNKW_X4 << 12;
+ utlset1 |= 0x00101101;
+ }
+
+ SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
+ SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
+ SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01210000);
+
+ switch (port) {
+ case 0:
+ SDR_WRITE(PESDR0_L0CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR0_L0DRV, 0x00000136);
+ SDR_WRITE(PESDR0_L0CLK, 0x00000006);
+
+ SDR_WRITE(PESDR0_PHY_CTL_RST,0x10000000);
+ break;
+
+ case 1:
+ SDR_WRITE(PESDR1_L0CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L1CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L2CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L3CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L0DRV, 0x00000136);
+ SDR_WRITE(PESDR1_L1DRV, 0x00000136);
+ SDR_WRITE(PESDR1_L2DRV, 0x00000136);
+ SDR_WRITE(PESDR1_L3DRV, 0x00000136);
+ SDR_WRITE(PESDR1_L0CLK, 0x00000006);
+ SDR_WRITE(PESDR1_L1CLK, 0x00000006);
+ SDR_WRITE(PESDR1_L2CLK, 0x00000006);
+ SDR_WRITE(PESDR1_L3CLK, 0x00000006);
+
+ SDR_WRITE(PESDR1_PHY_CTL_RST,0x10000000);
+ break;
+ }
+
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), SDR_READ(SDRN_PESDR_RCSSET(port)) |
+ (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+ /* Poll for PHY reset */
+ switch (port) {
+ case 0:
+ while (!(SDR_READ(PESDR0_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ case 1:
+ while (!(SDR_READ(PESDR1_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ }
+
+ SDR_WRITE(SDRN_PESDR_RCSSET(port),
+ (SDR_READ(SDRN_PESDR_RCSSET(port)) &
+ ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+ PESDRx_RCSSET_RSTPYN);
+
+ return 0;
+}
+#endif /* CONFIG_440SPE */
+
#if defined(CONFIG_405EX)
int __ppc4xx_init_pcie_port_hw(int port, int rootport)
{
#endif /* CONFIG_405EX */
int ppc4xx_init_pcie_port_hw(int port, int rootport)
- __attribute__((weak, alias("__ppc4xx_init_pcie_port_hw")));
+__attribute__((weak, alias("__ppc4xx_init_pcie_port_hw")));
/*
* We map PCI Express configuration access into the 512MB regions
* range (hangs the core upon config transaction attempts when set
* otherwise) while revA uses c_nnnn_nnnn.
*
- * For revA:
+ * For 440SPe revA:
* PCIE0: 0xc_4000_0000
* PCIE1: 0xc_8000_0000
* PCIE2: 0xc_c000_0000
*
- * For revB:
+ * For 440SPe revB:
* PCIE0: 0xd_0000_0000
* PCIE1: 0xd_2000_0000
* PCIE2: 0xd_4000_0000
* For 405EX:
* PCIE0: 0xa000_0000
* PCIE1: 0xc000_0000
+ *
+ * For 460EX/GT:
+ * PCIE0: 0xd_0000_0000
+ * PCIE1: 0xd_2000_0000
*/
static inline u64 ppc4xx_get_cfgaddr(int port)
{
}
}
#endif
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ if (port == 0)
+ return 0x0000000d00000000ULL;
+ else
+ return 0x0000000d20000000ULL;
+#endif
}
/*