* 10-Dec-99 Updated PCI_Write_CFG_Reg for pass2 errata #6 JWB
* 11-Jan-00 Ensure PMMxMAs disabled before setting PMMxLAs. This is not
* really required after a reset since PMMxMAs are already
- * disabled but is a good practice nonetheless. JWB
+ * disabled but is a good practice nonetheless. JWB
* 12-Jun-01 stefan.roese@esd-electronics.com
* - PCI host/adapter handling reworked
* 09-Jul-01 stefan.roese@esd-electronics.com
bd_t *bd = gd->bd;
unsigned short temp_short;
- unsigned long ptmpcila[2] = {CFG_PCI_PTM1PCI, CFG_PCI_PTM2PCI};
+ unsigned long ptmpcila[2] = {CONFIG_SYS_PCI_PTM1PCI, CONFIG_SYS_PCI_PTM2PCI};
#if defined(CONFIG_CPCI405) || defined(CONFIG_PMC405)
char *ptmla_str, *ptmms_str;
#endif
- unsigned long ptmla[2] = {CFG_PCI_PTM1LA, CFG_PCI_PTM2LA};
- unsigned long ptmms[2] = {CFG_PCI_PTM1MS, CFG_PCI_PTM2MS};
+ unsigned long ptmla[2] = {CONFIG_SYS_PCI_PTM1LA, CONFIG_SYS_PCI_PTM2LA};
+ unsigned long ptmms[2] = {CONFIG_SYS_PCI_PTM1MS, CONFIG_SYS_PCI_PTM2MS};
#if defined(CONFIG_PIP405) || defined (CONFIG_MIP405)
unsigned long pmmla[3] = {0x80000000, 0xA0000000, 0};
unsigned long pmmma[3] = {0xE0000001, 0xE0000001, 0};
/*
* Insert Subsystem Vendor and Device ID
*/
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CFG_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
#ifdef CONFIG_CPCI405
if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID);
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
else
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID2);
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID2);
#else
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID);
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
#endif
/*
* Insert Class-code
*/
-#ifdef CFG_PCI_CLASSCODE
- pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CFG_PCI_CLASSCODE);
-#endif /* CFG_PCI_CLASSCODE */
+#ifdef CONFIG_SYS_PCI_CLASSCODE
+ pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CONFIG_SYS_PCI_CLASSCODE);
+#endif /* CONFIG_SYS_PCI_CLASSCODE */
/*--------------------------------------------------------------------------+
- * If PCI speed = 66Mhz, set 66Mhz capable bit.
+ * If PCI speed = 66MHz, set 66MHz capable bit.
*--------------------------------------------------------------------------*/
if (bd->bi_pci_busfreq >= 66000000) {
pci_read_config_word(PCIDEVID_405GP, PCI_STATUS, &temp_short);
}
/*
- * drivers/pci.c skips every host bridge but the 405GP since it could
+ * drivers/pci/pci.c skips every host bridge but the 405GP since it could
* be set as an Adapter.
*
* I (Andrew May) don't know what we should do here, but I don't want
*/
static struct pci_config_table pci_405gp_config_table[] = {
/*if VendID is 0 it terminates the table search (ie Walnut)*/
-#ifdef CFG_PCI_SUBSYS_VENDORID
- {CFG_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST,
+#ifdef CONFIG_SYS_PCI_SUBSYS_VENDORID
+ {CONFIG_SYS_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST,
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_bridge},
#endif
{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA,
/* PCI memory space */
pci_set_region(hose->regions + reg_num++,
- CFG_PCI_TARGBASE,
- CFG_PCI_MEMBASE,
-#ifdef CFG_PCI_MEMSIZE
- CFG_PCI_MEMSIZE,
+ CONFIG_SYS_PCI_TARGBASE,
+ CONFIG_SYS_PCI_MEMBASE,
+#ifdef CONFIG_SYS_PCI_MEMSIZE
+ CONFIG_SYS_PCI_MEMSIZE,
#else
0x10000000,
#endif
/*--------------------------------------------------------------------------+
* PCI target init
*--------------------------------------------------------------------------*/
-#if defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
pci_target_init(hose); /* Let board setup pci target */
#else
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_ID );
+ out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID );
out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
out32r( PCIX0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
#elif defined(PCIX0_BRDGOPT1)
/*--------------------------------------------------------------------------+
* PCI master init: default is one 256MB region for PCI memory:
- * 0x3_00000000 - 0x3_0FFFFFFF ==> CFG_PCI_MEMBASE
+ * 0x3_00000000 - 0x3_0FFFFFFF ==> CONFIG_SYS_PCI_MEMBASE
*--------------------------------------------------------------------------*/
-#if defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_SYS_PCI_MASTER_INIT)
pci_master_init(hose); /* Let board setup pci master */
#else
out32r( PCIX0_POM0SA, 0 ); /* disable */
out32r( PCIX0_POM1SA, 0 ); /* disable */
out32r( PCIX0_POM2SA, 0 ); /* disable */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
out32r( PCIX0_POM0LAL, 0x10000000 );
out32r( PCIX0_POM0LAH, 0x0000000c );
#else
out32r( PCIX0_POM0LAL, 0x00000000 );
out32r( PCIX0_POM0LAH, 0x00000003 );
#endif
- out32r( PCIX0_POM0PCIAL, CFG_PCI_MEMBASE );
+ out32r( PCIX0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE );
out32r( PCIX0_POM0PCIAH, 0x00000000 );
out32r( PCIX0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
out32r( PCIX0_STS, in32r( PCIX0_STS ) & ~0x0000fff8 );
int busno;
busno = pci_440_init (&ppc440_hose);
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
pcie_setup_hoses(busno + 1);
#endif
}
projects / oweals / u-boot.git / blobdiff