/* Defines for the Read Cycle Delay test */
#define NUMMEMTESTS 8
#define NUMMEMWORDS 8
-#define NUMLOOPS 256 /* memory test loops */
+#define NUMLOOPS 64 /* memory test loops */
#undef CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */
* memory.
*
* If at some time this restriction doesn't apply anymore, just define
- * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
* everything correctly.
*/
-#ifdef CFG_ENABLE_SDRAM_CACHE
+#ifdef CONFIG_4xx_DCACHE
#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
#else
#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
}
void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+/*
+ * To provide an interface for board specific config values in this common
+ * DDR setup code, we implement he "weak" default functions here. They return
+ * the default value back to the caller.
+ *
+ * Please see include/configs/yucca.h for an example fora board specific
+ * implementation.
+ */
+u32 __ddr_wrdtr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
+
+u32 __ddr_clktr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
+
/* Private Structure Definitions */
* Prototypes
*-----------------------------------------------------------------------------*/
static unsigned long sdram_memsize(void);
-void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
static void get_spd_info(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks);
#else
static void DQS_calibration_process(void);
#endif
-#if defined(DEBUG)
static void ppc440sp_sdram_register_dump(void);
-#endif
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
void dcbz_area(u32 start_address, u32 num_bytes);
void dflush(void);
*-----------------------------------------------------------------*/
mfsdram(SDRAM_WRDTR, val);
mtsdram(SDRAM_WRDTR, (val & ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
- (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
+ ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
/*------------------------------------------------------------------
* Set the SDRAM Clock Timing Register
*-----------------------------------------------------------------*/
mfsdram(SDRAM_CLKTR, val);
-#ifdef CFG_44x_DDR2_CKTR_180
- mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_180_DEG_ADV);
-#else
- mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_0_DEG);
-#endif
+ mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) |
+ ddr_clktr(SDRAM_CLKTR_CLKP_0_DEG));
/*------------------------------------------------------------------
* Program the BxCF registers.
dram_size = sdram_memsize();
/* and program tlb entries for this size (dynamic) */
- program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
+
+ /*
+ * Program TLB entries with caches enabled, for best performace
+ * while auto-calibrating and ECC generation
+ */
+ program_tlb(0, 0, dram_size, 0);
/*------------------------------------------------------------------
* DQS calibration.
/*------------------------------------------------------------------
* If ecc is enabled, initialize the parity bits.
*-----------------------------------------------------------------*/
- program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, MY_TLB_WORD2_I_ENABLE);
+ program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, 0);
#endif
-#ifdef DEBUG
+ /*
+ * Now after initialization (auto-calibration and ECC generation)
+ * remove the TLB entries with caches enabled and program again with
+ * desired cache functionality
+ */
+ remove_tlb(0, dram_size);
+ program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
+
ppc440sp_sdram_register_dump();
-#endif
return dram_size;
}
}
}
-#ifdef CONFIG_ADD_RAM_INFO
void board_add_ram_info(int use_default)
{
- PPC440_SYS_INFO board_cfg;
+ PPC4xx_SYS_INFO board_cfg;
u32 val;
if (is_ecc_enabled())
val = (val & SDRAM_MMODE_DCL_MASK) >> 4;
printf(", CL%d)", val);
}
-#endif
/*------------------------------------------------------------------
* For the memory DIMMs installed, this routine verifies that they
unsigned long calc_cycle_time;
unsigned long sdram_freq;
unsigned long sdr_ddrpll;
- PPC440_SYS_INFO board_cfg;
+ PPC4xx_SYS_INFO board_cfg;
/*------------------------------------------------------------------
* Get the board configuration info.
unsigned long max_4_0_tcyc_ns_x_100;
unsigned long max_5_0_tcyc_ns_x_100;
unsigned long cycle_time_ns_x_100[3];
- PPC440_SYS_INFO board_cfg;
+ PPC4xx_SYS_INFO board_cfg;
unsigned char cas_2_0_available;
unsigned char cas_2_5_available;
unsigned char cas_3_0_available;
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks)
{
- PPC440_SYS_INFO board_cfg;
+ PPC4xx_SYS_INFO board_cfg;
unsigned long max_refresh_rate;
unsigned long dimm_num;
unsigned long refresh_rate_type;
unsigned long sdram_freq;
unsigned long sdr_ddrpll;
- PPC440_SYS_INFO board_cfg;
+ PPC4xx_SYS_INFO board_cfg;
/*------------------------------------------------------------------
* Get the board configuration info.
/*------------------------------------------------------------------
* Set the BxCF regs. First, wipe out the bank config registers.
*-----------------------------------------------------------------*/
- mtdcr(SDRAMC_CFGADDR, SDRAM_MB0CF);
- mtdcr(SDRAMC_CFGDATA, 0x00000000);
- mtdcr(SDRAMC_CFGADDR, SDRAM_MB1CF);
- mtdcr(SDRAMC_CFGDATA, 0x00000000);
- mtdcr(SDRAMC_CFGADDR, SDRAM_MB2CF);
- mtdcr(SDRAMC_CFGDATA, 0x00000000);
- mtdcr(SDRAMC_CFGADDR, SDRAM_MB3CF);
- mtdcr(SDRAMC_CFGDATA, 0x00000000);
+ mtsdram(SDRAM_MB0CF, 0x00000000);
+ mtsdram(SDRAM_MB1CF, 0x00000000);
+ mtsdram(SDRAM_MB2CF, 0x00000000);
+ mtsdram(SDRAM_MB3CF, 0x00000000);
mode = SDRAM_BXCF_M_BE_ENABLE;
bank_0_populated = 1;
for (ind_rank = 0; ind_rank < num_ranks; ind_rank++) {
- mtdcr(SDRAMC_CFGADDR, SDRAM_MB0CF + ((dimm_num + bank_0_populated + ind_rank) << 2));
- mtdcr(SDRAMC_CFGDATA, mode);
+ mtsdram(SDRAM_MB0CF +
+ ((dimm_num + bank_0_populated + ind_rank) << 2),
+ mode);
}
}
}
printf("\nERROR: Cannot determine a common read delay for the "
"DIMM(s) installed.\n");
debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
+ ppc440sp_sdram_register_dump();
spd_ddr_init_hang ();
}
dcr_data = mfdcr(SDRAM_R3BAS);
printf(" MQ3_B0BAS = 0x%08X\n", dcr_data);
}
+#else
+static void ppc440sp_sdram_register_dump(void)
+{
+}
#endif
#endif /* CONFIG_SPD_EEPROM */
projects / oweals / u-boot.git / blobdiff