#include <watchdog.h>
#include <command.h>
#include <tsec.h>
+#include <netdev.h>
+#include <fsl_esdhc.h>
#include <asm/cache.h>
#include <asm/io.h>
CPU_TYPE_ENTRY(8567, 8567_E),
CPU_TYPE_ENTRY(8568, 8568),
CPU_TYPE_ENTRY(8568, 8568_E),
+ CPU_TYPE_ENTRY(8569, 8569),
+ CPU_TYPE_ENTRY(8569, 8569_E),
CPU_TYPE_ENTRY(8572, 8572),
CPU_TYPE_ENTRY(8572, 8572_E),
+ CPU_TYPE_ENTRY(P2020, P2020),
+ CPU_TYPE_ENTRY(P2020, P2020_E),
};
struct cpu_type *identify_cpu(u32 ver)
int checkcpu (void)
{
sys_info_t sysinfo;
- uint lcrr; /* local bus clock ratio register */
- uint clkdiv; /* clock divider portion of lcrr */
uint pvr, svr;
uint fam;
uint ver;
uint major, minor;
struct cpu_type *cpu;
+ char buf1[32], buf2[32];
#ifdef CONFIG_DDR_CLK_FREQ
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
#else
u32 ddr_ratio = 0;
#endif
+ int i;
svr = get_svr();
ver = SVR_SOC_VER(svr);
puts("Unknown");
break;
}
+
+ if (PVR_MEM(pvr) == 0x03)
+ puts("MC");
+
printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
get_sys_info(&sysinfo);
- puts("Clock Configuration:\n");
- printf(" CPU:%4lu MHz, ", DIV_ROUND_UP(sysinfo.freqProcessor,1000000));
- printf("CCB:%4lu MHz,\n", DIV_ROUND_UP(sysinfo.freqSystemBus,1000000));
+ puts("Clock Configuration:");
+ for (i = 0; i < CONFIG_NUM_CPUS; i++) {
+ if (!(i & 3))
+ printf ("\n ");
+ printf("CPU%d:%-4s MHz, ",
+ i,strmhz(buf1, sysinfo.freqProcessor[i]));
+ }
+ printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
switch (ddr_ratio) {
case 0x0:
- printf(" DDR:%4lu MHz (%lu MT/s data rate), ",
- DIV_ROUND_UP(sysinfo.freqDDRBus,2000000), DIV_ROUND_UP(sysinfo.freqDDRBus,1000000));
+ printf(" DDR:%-4s MHz (%s MT/s data rate), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
break;
case 0x7:
- printf(" DDR:%4lu MHz (%lu MT/s data rate) (Synchronous), ",
- DIV_ROUND_UP(sysinfo.freqDDRBus, 2000000), DIV_ROUND_UP(sysinfo.freqDDRBus, 1000000));
+ printf(" DDR:%-4s MHz (%s MT/s data rate) (Synchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
break;
default:
- printf(" DDR:%4lu MHz (%lu MT/s data rate) (Asynchronous), ",
- DIV_ROUND_UP(sysinfo.freqDDRBus, 2000000), DIV_ROUND_UP(sysinfo.freqDDRBus,1000000));
+ printf(" DDR:%-4s MHz (%s MT/s data rate) (Asynchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
break;
}
-#if defined(CONFIG_SYS_LBC_LCRR)
- lcrr = CONFIG_SYS_LBC_LCRR;
-#else
- {
- volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-
- lcrr = lbc->lcrr;
- }
-#endif
- clkdiv = lcrr & 0x0f;
- if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
-#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \
- defined(CONFIG_MPC8572) || defined(CONFIG_MPC8536)
- /*
- * Yes, the entire PQ38 family use the same
- * bit-representation for twice the clock divider values.
- */
- clkdiv *= 2;
-#endif
- printf("LBC:%4lu MHz\n",
- DIV_ROUND_UP(sysinfo.freqSystemBus, 1000000) / clkdiv);
- } else {
- printf("LBC: unknown (lcrr: 0x%08x)\n", lcrr);
- }
+ if (sysinfo.freqLocalBus > LCRR_CLKDIV)
+ printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+ else
+ printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
+ sysinfo.freqLocalBus);
#ifdef CONFIG_CPM2
- printf("CPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
+ printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
#endif
puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
*/
int cpu_eth_init(bd_t *bis)
{
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_MPC85xx_FEC)
+#if defined(CONFIG_ETHER_ON_FCC)
+ fec_initialize(bis);
+#endif
+#if defined(CONFIG_UEC_ETH1)
+ uec_initialize(0);
+#endif
+#if defined(CONFIG_UEC_ETH2)
+ uec_initialize(1);
+#endif
+#if defined(CONFIG_UEC_ETH3)
+ uec_initialize(2);
+#endif
+#if defined(CONFIG_UEC_ETH4)
+ uec_initialize(3);
+#endif
+#if defined(CONFIG_UEC_ETH5)
+ uec_initialize(4);
+#endif
+#if defined(CONFIG_UEC_ETH6)
+ uec_initialize(5);
+#endif
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_MPC85XX_FEC)
tsec_standard_init(bis);
#endif
return 0;
}
+
+/*
+ * Initializes on-chip MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_FSL_ESDHC
+ return fsl_esdhc_mmc_init(bis);
+#else
+ return 0;
+#endif
+}