* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
* Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright Freescale Semiconductor, Inc. 2004, 2006, 2008.
*
* See file CREDITS for list of people who contributed to this
* project.
#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
#endif
+#if !defined(CONFIG_NAND_SPL) && !defined(CFG_RAMBOOT)
+#define CFG_FLASHBOOT
+#endif
+
/*
* Set up GOT: Global Offset Table
*
*/
START_GOT
GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
+ GOT_ENTRY(__bss_start)
+ GOT_ENTRY(_end)
+#ifndef CONFIG_NAND_SPL
+ GOT_ENTRY(_FIXUP_TABLE_)
GOT_ENTRY(_start)
GOT_ENTRY(_start_of_vectors)
GOT_ENTRY(_end_of_vectors)
GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
+#endif
END_GOT
/*
- * Version string - must be in data segment because MPC83xx uses the
- * first 256 bytes for the Hard Reset Configuration Word table (see
- * below). Similarly, can't have the U-Boot Magic Number as the first
- * thing in the image - don't know how this will affect the image tools,
- * but I guess I'll find out soon.
+ * The Hard Reset Configuration Word (HRCW) table is in the first 64
+ * (0x40) bytes of flash. It has 8 bytes, but each byte is repeated 8
+ * times so the processor can fetch it out of flash whether the flash
+ * is 8, 16, 32, or 64 bits wide (hardware trickery).
*/
- .data
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", __DATE__, " - ", __TIME__, ")"
- .ascii " ", CONFIG_IDENT_STRING, "\0"
-
.text
#define _HRCW_TABLE_ENTRY(w) \
.fill 8,1,(((w)>>24)&0xff); \
_HRCW_TABLE_ENTRY(CFG_HRCW_LOW)
_HRCW_TABLE_ENTRY(CFG_HRCW_HIGH)
+/*
+ * Magic number and version string - put it after the HRCW since it
+ * cannot be first in flash like it is in many other processors.
+ */
+ .long 0x27051956 /* U-Boot Magic Number */
+
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii " ", CONFIG_IDENT_STRING, "\0"
+
#ifndef CONFIG_DEFAULT_IMMR
#error CONFIG_DEFAULT_IMMR must be defined
#endif /* CFG_DEFAULT_IMMR */
-#ifndef CFG_IMMRBAR
-#define CFG_IMMRBAR CONFIG_DEFAULT_IMMR
-#endif /* CFG_IMMRBAR */
+#ifndef CFG_IMMR
+#define CFG_IMMR CONFIG_DEFAULT_IMMR
+#endif /* CFG_IMMR */
/*
* After configuration, a system reset exception is executed using the
nop
boot_warm: /* time t 5 */
mfmsr r5 /* save msr contents */
- lis r3, CFG_IMMRBAR@h
- ori r3, r3, CFG_IMMRBAR@l
+ lis r3, CFG_IMMR@h
+ ori r3, r3, CFG_IMMR@l
stw r3, IMMRBAR(r4)
/* Initialise the E300 processor core */
bl init_e300_core
-#ifndef CFG_RAMBOOT
+#ifdef CFG_FLASHBOOT
/* Inflate flash location so it appears everywhere, calculate */
/* the absolute address in final location of the FLASH, jump */
#if 1 /* Remapping flash with LAW0. */
bl remap_flash_by_law0
#endif
-#endif /* CFG_RAMBOOT */
+#endif /* CFG_FLASHBOOT */
/* setup the bats */
bl setup_bats
GET_GOT /* initialize GOT access */
/* r3: IMMR */
- lis r3, CFG_IMMRBAR@h
+ lis r3, CFG_IMMR@h
/* run low-level CPU init code (in Flash)*/
bl cpu_init_f
/* run 1st part of board init code (in Flash)*/
bl board_init_f
+#ifndef CONFIG_NAND_SPL
/*
* Vector Table
*/
/* Alignment exception. */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
/* Program check exception */
. = 0x700
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
lwz r1,GPR1(r1)
SYNC
rfi
+#endif /* !CONFIG_NAND_SPL */
/*
* This code initialises the E300 processor core
mtspr SRR1, r3 /* Make SRR1 match MSR */
- lis r3, CFG_IMMRBAR@h
+ lis r3, CFG_IMMR@h
#if defined(CONFIG_WATCHDOG)
/* Initialise the Wathcdog values and reset it (if req) */
/*------------------------------------------------------*/
li r4, 0x556C
sth r4, SWSRR@l(r3)
- li r4, 0xAA39
+ li r4, -0x55C7
sth r4, SWSRR@l(r3)
#else
/* Disable Wathcdog */
SYNC
mtspr HID2, r3
- /* clear all BAT's */
- /*----------------------------------*/
-
- xor r0, r0, r0
- mtspr DBAT0U, r0
- mtspr DBAT0L, r0
- mtspr DBAT1U, r0
- mtspr DBAT1L, r0
- mtspr DBAT2U, r0
- mtspr DBAT2L, r0
- mtspr DBAT3U, r0
- mtspr DBAT3L, r0
- mtspr IBAT0U, r0
- mtspr IBAT0L, r0
- mtspr IBAT1U, r0
- mtspr IBAT1L, r0
- mtspr IBAT2U, r0
- mtspr IBAT2L, r0
- mtspr IBAT3U, r0
- mtspr IBAT3L, r0
- SYNC
-
- /* invalidate all tlb's
- *
- * From the 603e User Manual: "The 603e provides the ability to
- * invalidate a TLB entry. The TLB Invalidate Entry (tlbie)
- * instruction invalidates the TLB entry indexed by the EA, and
- * operates on both the instruction and data TLBs simultaneously
- * invalidating four TLB entries (both sets in each TLB). The
- * index corresponds to bits 15-19 of the EA. To invalidate all
- * entries within both TLBs, 32 tlbie instructions should be
- * issued, incrementing this field by one each time."
- *
- * "Note that the tlbia instruction is not implemented on the
- * 603e."
- *
- * bits 15-19 correspond to addresses 0x00000000 to 0x0001F000
- * incrementing by 0x1000 each time. The code below is sort of
- * based on code in "flush_tlbs" from arch/ppc/kernel/head.S
- *
- */
-
- li r3, 32
- mtctr r3
- li r3, 0
-1: tlbie r3
- addi r3, r3, 0x1000
- bdnz 1b
- SYNC
-
/* Done! */
/*------------------------------*/
blr
- .globl invalidate_bats
-invalidate_bats:
- /* invalidate BATs */
- mtspr IBAT0U, r0
- mtspr IBAT1U, r0
- mtspr IBAT2U, r0
- mtspr IBAT3U, r0
-#if (CFG_HID2 & HID2_HBE)
- mtspr IBAT4U, r0
- mtspr IBAT5U, r0
- mtspr IBAT6U, r0
- mtspr IBAT7U, r0
-#endif
- isync
- mtspr DBAT0U, r0
- mtspr DBAT1U, r0
- mtspr DBAT2U, r0
- mtspr DBAT3U, r0
-#if (CFG_HID2 & HID2_HBE)
- mtspr DBAT4U, r0
- mtspr DBAT5U, r0
- mtspr DBAT6U, r0
- mtspr DBAT7U, r0
-#endif
- isync
- sync
- blr
-
/* setup_bats - set them up to some initial state */
.globl setup_bats
setup_bats:
ori r3, r3, CFG_IBAT0U@l
mtspr IBAT0L, r4
mtspr IBAT0U, r3
- isync
/* DBAT 0 */
addis r4, r0, CFG_DBAT0L@h
ori r3, r3, CFG_DBAT0U@l
mtspr DBAT0L, r4
mtspr DBAT0U, r3
- isync
/* IBAT 1 */
addis r4, r0, CFG_IBAT1L@h
ori r3, r3, CFG_IBAT1U@l
mtspr IBAT1L, r4
mtspr IBAT1U, r3
- isync
/* DBAT 1 */
addis r4, r0, CFG_DBAT1L@h
ori r3, r3, CFG_DBAT1U@l
mtspr DBAT1L, r4
mtspr DBAT1U, r3
- isync
/* IBAT 2 */
addis r4, r0, CFG_IBAT2L@h
ori r3, r3, CFG_IBAT2U@l
mtspr IBAT2L, r4
mtspr IBAT2U, r3
- isync
/* DBAT 2 */
addis r4, r0, CFG_DBAT2L@h
ori r3, r3, CFG_DBAT2U@l
mtspr DBAT2L, r4
mtspr DBAT2U, r3
- isync
/* IBAT 3 */
addis r4, r0, CFG_IBAT3L@h
ori r3, r3, CFG_IBAT3U@l
mtspr IBAT3L, r4
mtspr IBAT3U, r3
- isync
/* DBAT 3 */
addis r4, r0, CFG_DBAT3L@h
ori r3, r3, CFG_DBAT3U@l
mtspr DBAT3L, r4
mtspr DBAT3U, r3
- isync
-#if (CFG_HID2 & HID2_HBE)
+#ifdef CONFIG_HIGH_BATS
/* IBAT 4 */
addis r4, r0, CFG_IBAT4L@h
ori r4, r4, CFG_IBAT4L@l
ori r3, r3, CFG_IBAT4U@l
mtspr IBAT4L, r4
mtspr IBAT4U, r3
- isync
/* DBAT 4 */
addis r4, r0, CFG_DBAT4L@h
ori r3, r3, CFG_DBAT4U@l
mtspr DBAT4L, r4
mtspr DBAT4U, r3
- isync
/* IBAT 5 */
addis r4, r0, CFG_IBAT5L@h
ori r3, r3, CFG_IBAT5U@l
mtspr IBAT5L, r4
mtspr IBAT5U, r3
- isync
/* DBAT 5 */
addis r4, r0, CFG_DBAT5L@h
ori r3, r3, CFG_DBAT5U@l
mtspr DBAT5L, r4
mtspr DBAT5U, r3
- isync
/* IBAT 6 */
addis r4, r0, CFG_IBAT6L@h
ori r3, r3, CFG_IBAT6U@l
mtspr IBAT6L, r4
mtspr IBAT6U, r3
- isync
/* DBAT 6 */
addis r4, r0, CFG_DBAT6L@h
ori r3, r3, CFG_DBAT6U@l
mtspr DBAT6L, r4
mtspr DBAT6U, r3
- isync
/* IBAT 7 */
addis r4, r0, CFG_IBAT7L@h
ori r3, r3, CFG_IBAT7U@l
mtspr IBAT7L, r4
mtspr IBAT7U, r3
- isync
/* DBAT 7 */
addis r4, r0, CFG_DBAT7L@h
ori r3, r3, CFG_DBAT7U@l
mtspr DBAT7L, r4
mtspr DBAT7U, r3
- isync
#endif
- /* Invalidate TLBs.
- * -> for (val = 0; val < 0x20000; val+=0x1000)
- * -> tlbie(val);
+ isync
+
+ /* invalidate all tlb's
+ *
+ * From the 603e User Manual: "The 603e provides the ability to
+ * invalidate a TLB entry. The TLB Invalidate Entry (tlbie)
+ * instruction invalidates the TLB entry indexed by the EA, and
+ * operates on both the instruction and data TLBs simultaneously
+ * invalidating four TLB entries (both sets in each TLB). The
+ * index corresponds to bits 15-19 of the EA. To invalidate all
+ * entries within both TLBs, 32 tlbie instructions should be
+ * issued, incrementing this field by one each time."
+ *
+ * "Note that the tlbia instruction is not implemented on the
+ * 603e."
+ *
+ * bits 15-19 correspond to addresses 0x00000000 to 0x0001F000
+ * incrementing by 0x1000 each time. The code below is sort of
+ * based on code in "flush_tlbs" from arch/ppc/kernel/head.S
+ *
*/
lis r3, 0
lis r5, 2
mfspr r3, PVR
blr
+ .globl ppcDWstore
+ppcDWstore:
+ lfd 1, 0(r4)
+ stfd 1, 0(r3)
+ blr
+
+ .globl ppcDWload
+ppcDWload:
+ lfd 1, 0(r3)
+ stfd 1, 0(r4)
+ blr
+
/*-------------------------------------------------------------------*/
/*
mr r3, r5 /* Destination Address */
lis r4, CFG_MONITOR_BASE@h /* Source Address */
ori r4, r4, CFG_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
+ lwz r5, GOT(__bss_start)
sub r5, r5, r4
li r6, CFG_CACHELINE_SIZE /* Cache Line Size */
stw r0,0(r3)
bdnz 1b
+#ifndef CONFIG_NAND_SPL
/*
* Now adjust the fixups and the pointers to the fixups
* in case we need to move ourselves again.
stw r0,0(r4)
bdnz 3b
4:
+#endif
+
clear_bss:
/*
* Now clear BSS segment
mr r4, r10 /* Destination Address */
bl board_init_r
+#ifndef CONFIG_NAND_SPL
/*
* Copy exception vector code to low memory
*
stw r0, 4(r7)
blr
+#endif /* !CONFIG_NAND_SPL */
#ifdef CFG_INIT_RAM_LOCK
lock_ram_in_cache:
sync
blr
+#ifndef CONFIG_NAND_SPL
.globl unlock_ram_in_cache
unlock_ram_in_cache:
/* invalidate the INIT_RAM section */
mtspr HID0, r3 /* no invalidate, unlock */
sync
blr
-#endif
+#endif /* !CONFIG_NAND_SPL */
+#endif /* CFG_INIT_RAM_LOCK */
+#ifdef CFG_FLASHBOOT
map_flash_by_law1:
/* When booting from ROM (Flash or EPROM), clear the */
/* Address Mask in OR0 so ROM appears everywhere */
/*----------------------------------------------------*/
- lis r3, (CFG_IMMRBAR)@h /* r3 <= CFG_IMMRBAR */
+ lis r3, (CFG_IMMR)@h /* r3 <= CFG_IMMR */
lwz r4, OR0@l(r3)
li r5, 0x7fff /* r5 <= 0x00007FFFF */
and r4, r4, r5
lis r4, (CFG_FLASH_BASE)@h
ori r4, r4, (CFG_FLASH_BASE)@l
stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CFG_FLASH_BASE */
- lis r4, (0x80000016)@h
- ori r4, r4, (0x80000016)@l
+
+ /* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR1 */
+ lis r4, (0x80000012)@h
+ ori r4, r4, (0x80000012)@l
+ li r5, CFG_FLASH_SIZE
+1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
+ addi r4, r4, 1
+ bne 1b
+
stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
blr
stw r5, BR0(r3) /* r5 <= (CFG_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
lwz r4, OR0(r3)
- lis r5, 0xFF80 /* 8M */
+ lis r5, ~((CFG_FLASH_SIZE << 4) - 1)
or r4, r4, r5
- stw r4, OR0(r3) /* OR0 <= OR0 | 0xFF800000 */
+ stw r4, OR0(r3)
lis r4, (CFG_FLASH_BASE)@h
ori r4, r4, (CFG_FLASH_BASE)@l
stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CFG_FLASH_BASE */
- lis r4, (0x80000016)@h
- ori r4, r4, (0x80000016)@l
- stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= 8MB Flash Size */
+ /* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR0 */
+ lis r4, (0x80000012)@h
+ ori r4, r4, (0x80000012)@l
+ li r5, CFG_FLASH_SIZE
+1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
+ addi r4, r4, 1
+ bne 1b
+ stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= Flash Size */
+
xor r4, r4, r4
stw r4, LBLAWBAR1(r3)
stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
blr
+#endif /* CFG_FLASHBOOT */