* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- *
- * Change log:
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- * Initial file creating (porting from 85XX & 8260)
*/
#include <common.h>
#include <mpc83xx.h>
+#include <command.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
typedef struct {
mult_t core_csb_ratio;
- mult_t vco_divider;
+ mult_t vco_divider;
} corecnf_t;
corecnf_t corecnf_tab[] = {
- { _byp, _byp}, /* 0x00 */
- { _byp, _byp}, /* 0x01 */
- { _byp, _byp}, /* 0x02 */
- { _byp, _byp}, /* 0x03 */
- { _byp, _byp}, /* 0x04 */
- { _byp, _byp}, /* 0x05 */
- { _byp, _byp}, /* 0x06 */
- { _byp, _byp}, /* 0x07 */
- { _1x, _x2}, /* 0x08 */
- { _1x, _x4}, /* 0x09 */
- { _1x, _x8}, /* 0x0A */
- { _1x, _x8}, /* 0x0B */
- {_1_5x, _x2}, /* 0x0C */
- {_1_5x, _x4}, /* 0x0D */
- {_1_5x, _x8}, /* 0x0E */
- {_1_5x, _x8}, /* 0x0F */
- { _2x, _x2}, /* 0x10 */
- { _2x, _x4}, /* 0x11 */
- { _2x, _x8}, /* 0x12 */
- { _2x, _x8}, /* 0x13 */
- {_2_5x, _x2}, /* 0x14 */
- {_2_5x, _x4}, /* 0x15 */
- {_2_5x, _x8}, /* 0x16 */
- {_2_5x, _x8}, /* 0x17 */
- { _3x, _x2}, /* 0x18 */
- { _3x, _x4}, /* 0x19 */
- { _3x, _x8}, /* 0x1A */
- { _3x, _x8}, /* 0x1B */
+ {_byp, _byp}, /* 0x00 */
+ {_byp, _byp}, /* 0x01 */
+ {_byp, _byp}, /* 0x02 */
+ {_byp, _byp}, /* 0x03 */
+ {_byp, _byp}, /* 0x04 */
+ {_byp, _byp}, /* 0x05 */
+ {_byp, _byp}, /* 0x06 */
+ {_byp, _byp}, /* 0x07 */
+ {_1x, _x2}, /* 0x08 */
+ {_1x, _x4}, /* 0x09 */
+ {_1x, _x8}, /* 0x0A */
+ {_1x, _x8}, /* 0x0B */
+ {_1_5x, _x2}, /* 0x0C */
+ {_1_5x, _x4}, /* 0x0D */
+ {_1_5x, _x8}, /* 0x0E */
+ {_1_5x, _x8}, /* 0x0F */
+ {_2x, _x2}, /* 0x10 */
+ {_2x, _x4}, /* 0x11 */
+ {_2x, _x8}, /* 0x12 */
+ {_2x, _x8}, /* 0x13 */
+ {_2_5x, _x2}, /* 0x14 */
+ {_2_5x, _x4}, /* 0x15 */
+ {_2_5x, _x8}, /* 0x16 */
+ {_2_5x, _x8}, /* 0x17 */
+ {_3x, _x2}, /* 0x18 */
+ {_3x, _x4}, /* 0x19 */
+ {_3x, _x8}, /* 0x1A */
+ {_3x, _x8}, /* 0x1B */
};
/* ----------------------------------------------------------------- */
/*
*
*/
-int get_clocks (void)
+int get_clocks(void)
{
- volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 pci_sync_in;
- u8 spmf;
- u8 clkin_div;
+ u8 spmf;
+ u8 clkin_div;
u32 sccr;
u32 corecnf_tab_index;
- u8 corepll;
+ u8 corepll;
u32 lcrr;
u32 csb_clk;
-#if defined(CONFIG_MPC8349)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
u32 tsec1_clk;
u32 tsec2_clk;
- u32 usbmph_clk;
u32 usbdr_clk;
+#endif
+#ifdef CONFIG_MPC834X
+ u32 usbmph_clk;
#endif
u32 core_clk;
u32 i2c1_clk;
+#if !defined(CONFIG_MPC832X)
u32 i2c2_clk;
+#endif
+#if defined(CONFIG_MPC8315)
+ u32 tdm_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ u32 sdhc_clk;
+#endif
u32 enc_clk;
u32 lbiu_clk;
u32 lclk_clk;
- u32 ddr_clk;
-#if defined (CONFIG_MPC8360)
+ u32 mem_clk;
+#if defined(CONFIG_MPC8360)
+ u32 mem_sec_clk;
+#endif
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
u32 qepmf;
u32 qepdf;
- u32 ddr_sec_clk;
u32 qe_clk;
u32 brg_clk;
#endif
+#if defined(CONFIG_MPC837X)
+ u32 pciexp1_clk;
+ u32 pciexp2_clk;
+#endif
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ u32 sata_clk;
+#endif
- if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
return -1;
clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
#endif
}
- spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT);
+ spmf = ((im->reset.rcwl & HRCWL_SPMF) >> HRCWL_SPMF_SHIFT);
csb_clk = pci_sync_in * (1 + clkin_div) * spmf;
sccr = im->clk.sccr;
-#if defined(CONFIG_MPC8349)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
case 0:
tsec1_clk = 0;
break;
default:
/* unkown SCCR_TSEC1CM value */
- return -4;
+ return -2;
+ }
+
+ switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
+ case 0:
+ usbdr_clk = 0;
+ break;
+ case 1:
+ usbdr_clk = csb_clk;
+ break;
+ case 2:
+ usbdr_clk = csb_clk / 2;
+ break;
+ case 3:
+ usbdr_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_USBDRCM value */
+ return -3;
}
+#endif
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
case 0:
tsec2_clk = 0;
break;
default:
/* unkown SCCR_TSEC2CM value */
- return -5;
+ return -4;
}
+#elif defined(CONFIG_MPC8313)
+ tsec2_clk = tsec1_clk;
- i2c1_clk = tsec2_clk;
+ if (!(sccr & SCCR_TSEC1ON))
+ tsec1_clk = 0;
+ if (!(sccr & SCCR_TSEC2ON))
+ tsec2_clk = 0;
+#endif
+#if defined(CONFIG_MPC834X)
switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
case 0:
usbmph_clk = 0;
break;
default:
/* unkown SCCR_USBMPHCM value */
+ return -5;
+ }
+
+ if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
+ /* if USB MPH clock is not disabled and
+ * USB DR clock is not disabled then
+ * USB MPH & USB DR must have the same rate
+ */
+ return -6;
+ }
+#endif
+ switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+ case 0:
+ enc_clk = 0;
+ break;
+ case 1:
+ enc_clk = csb_clk;
+ break;
+ case 2:
+ enc_clk = csb_clk / 2;
+ break;
+ case 3:
+ enc_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_ENCCM value */
return -7;
}
- switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
+#if defined(CONFIG_MPC837X)
+ switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
case 0:
- usbdr_clk = 0;
+ sdhc_clk = 0;
break;
case 1:
- usbdr_clk = csb_clk;
+ sdhc_clk = csb_clk;
break;
case 2:
- usbdr_clk = csb_clk / 2;
+ sdhc_clk = csb_clk / 2;
break;
case 3:
- usbdr_clk = csb_clk / 3;
+ sdhc_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_USBDRCM value */
+ /* unkown SCCR_SDHCCM value */
return -8;
}
-
- if (usbmph_clk != 0
- && usbdr_clk != 0
- && usbmph_clk != usbdr_clk ) {
- /* if USB MPH clock is not disabled and USB DR clock is not disabled than USB MPH & USB DR must have the same rate */
- return -9;
+#endif
+#if defined(CONFIG_MPC8315)
+ switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) {
+ case 0:
+ tdm_clk = 0;
+ break;
+ case 1:
+ tdm_clk = csb_clk;
+ break;
+ case 2:
+ tdm_clk = csb_clk / 2;
+ break;
+ case 3:
+ tdm_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_TDMCM value */
+ return -8;
}
#endif
-#if defined (CONFIG_MPC8360)
+
+#if defined(CONFIG_MPC834X)
+ i2c1_clk = tsec2_clk;
+#elif defined(CONFIG_MPC8360)
i2c1_clk = csb_clk;
+#elif defined(CONFIG_MPC832X)
+ i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC831X)
+ i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC837X)
+ i2c1_clk = sdhc_clk;
#endif
+#if !defined(CONFIG_MPC832X)
i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
+#endif
- switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+#if defined(CONFIG_MPC837X)
+ switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
case 0:
- enc_clk = 0;
+ pciexp1_clk = 0;
break;
case 1:
- enc_clk = csb_clk;
+ pciexp1_clk = csb_clk;
break;
case 2:
- enc_clk = csb_clk / 2;
+ pciexp1_clk = csb_clk / 2;
break;
case 3:
- enc_clk = csb_clk / 3;
+ pciexp1_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_ENCCM value */
- return -6;
+ /* unkown SCCR_PCIEXP1CM value */
+ return -9;
+ }
+
+ switch ((sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT) {
+ case 0:
+ pciexp2_clk = 0;
+ break;
+ case 1:
+ pciexp2_clk = csb_clk;
+ break;
+ case 2:
+ pciexp2_clk = csb_clk / 2;
+ break;
+ case 3:
+ pciexp2_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_PCIEXP2CM value */
+ return -10;
}
-#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
- lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
-#else
-#error Unknown MPC83xx chip
#endif
+
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
+ case 0:
+ sata_clk = 0;
+ break;
+ case 1:
+ sata_clk = csb_clk;
+ break;
+ case 2:
+ sata_clk = csb_clk / 2;
+ break;
+ case 3:
+ sata_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_SATACM value */
+ return -11;
+ }
+#endif
+
+ lbiu_clk = csb_clk *
+ (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
switch (lcrr) {
case 2:
break;
default:
/* unknown lcrr */
- return -10;
+ return -12;
}
-#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
- ddr_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
- corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT;
-#if defined (CONFIG_MPC8360)
- ddr_sec_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
-#endif
-#else
-#error Unknown MPC83xx chip
+
+ mem_clk = csb_clk *
+ (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT));
+ corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT;
+#if defined(CONFIG_MPC8360)
+ mem_sec_clk = csb_clk * (1 +
+ ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
#endif
corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
- if (corecnf_tab_index > (sizeof(corecnf_tab)/sizeof(corecnf_t)) ) {
+ if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) {
/* corecnf_tab_index is too high, possibly worng value */
return -11;
}
core_clk = 2 * csb_clk;
break;
case _2_5x:
- core_clk = ( 5 * csb_clk) / 2;
+ core_clk = (5 * csb_clk) / 2;
break;
case _3x:
core_clk = 3 * csb_clk;
break;
default:
/* unkown core to csb ratio */
- return -12;
+ return -13;
}
-#if defined (CONFIG_MPC8360)
- qepmf = (im->reset.rcwl & RCWL_CEPMF) >> RCWL_CEPMF_SHIFT;
- qepdf = (im->reset.rcwl & RCWL_CEPDF) >> RCWL_CEPDF_SHIFT;
- qe_clk = (pci_sync_in * qepmf)/(1+qepdf);
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ qepmf = (im->reset.rcwl & HRCWL_CEPMF) >> HRCWL_CEPMF_SHIFT;
+ qepdf = (im->reset.rcwl & HRCWL_CEPDF) >> HRCWL_CEPDF_SHIFT;
+ qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
brg_clk = qe_clk / 2;
#endif
- gd->csb_clk = csb_clk;
-#if defined(CONFIG_MPC8349)
- gd->tsec1_clk = tsec1_clk;
- gd->tsec2_clk = tsec2_clk;
- gd->usbmph_clk = usbmph_clk;
- gd->usbdr_clk = usbdr_clk;
-#endif
- gd->core_clk = core_clk;
- gd->i2c1_clk = i2c1_clk;
- gd->i2c2_clk = i2c2_clk;
- gd->enc_clk = enc_clk;
- gd->lbiu_clk = lbiu_clk;
- gd->lclk_clk = lclk_clk;
- gd->ddr_clk = ddr_clk;
-#if defined (CONFIG_MPC8360)
- gd->ddr_sec_clk = ddr_sec_clk;
- gd->qe_clk = qe_clk;
- gd->brg_clk = brg_clk;
-#endif
- gd->cpu_clk = gd->core_clk;
- gd->bus_clk = gd->csb_clk;
+ gd->csb_clk = csb_clk;
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
+ gd->tsec1_clk = tsec1_clk;
+ gd->tsec2_clk = tsec2_clk;
+ gd->usbdr_clk = usbdr_clk;
+#endif
+#if defined(CONFIG_MPC834X)
+ gd->usbmph_clk = usbmph_clk;
+#endif
+#if defined(CONFIG_MPC8315)
+ gd->tdm_clk = tdm_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ gd->sdhc_clk = sdhc_clk;
+#endif
+ gd->core_clk = core_clk;
+ gd->i2c1_clk = i2c1_clk;
+#if !defined(CONFIG_MPC832X)
+ gd->i2c2_clk = i2c2_clk;
+#endif
+ gd->enc_clk = enc_clk;
+ gd->lbiu_clk = lbiu_clk;
+ gd->lclk_clk = lclk_clk;
+ gd->mem_clk = mem_clk;
+#if defined(CONFIG_MPC8360)
+ gd->mem_sec_clk = mem_sec_clk;
+#endif
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ gd->qe_clk = qe_clk;
+ gd->brg_clk = brg_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ gd->pciexp1_clk = pciexp1_clk;
+ gd->pciexp2_clk = pciexp2_clk;
+#endif
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ gd->sata_clk = sata_clk;
+#endif
+ gd->pci_clk = pci_sync_in;
+ gd->cpu_clk = gd->core_clk;
+ gd->bus_clk = gd->csb_clk;
return 0;
}
-ulong get_ddr_clk(ulong dummy)
-{
- return gd->ddr_clk;
-}
-
-
/********************************************
* get_bus_freq
* return system bus freq in Hz
*********************************************/
-ulong get_bus_freq (ulong dummy)
+ulong get_bus_freq(ulong dummy)
{
return gd->csb_clk;
}
-int print_clock_conf (void)
+int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
+ char buf[32];
+
printf("Clock configuration:\n");
- printf(" Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000);
- printf(" Core: %4d MHz\n",gd->core_clk/1000000);
-#if defined (CONFIG_MPC8360)
- printf(" QE: %4d MHz\n",gd->qe_clk/1000000);
-#endif
- printf(" Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000);
- printf(" Local Bus: %4d MHz\n",gd->lclk_clk/1000000);
- printf(" DDR: %4d MHz\n",gd->ddr_clk/1000000);
-#if defined (CONFIG_MPC8360)
- printf(" DDR Secondary: %4d MHz\n",gd->ddr_sec_clk/1000000);
-#endif
- printf(" SEC: %4d MHz\n",gd->enc_clk/1000000);
- printf(" I2C1: %4d MHz\n",gd->i2c1_clk/1000000);
- printf(" I2C2: %4d MHz\n",gd->i2c2_clk/1000000);
-#if defined(CONFIG_MPC8349)
- printf(" TSEC1: %4d MHz\n",gd->tsec1_clk/1000000);
- printf(" TSEC2: %4d MHz\n",gd->tsec2_clk/1000000);
- printf(" USB MPH: %4d MHz\n",gd->usbmph_clk/1000000);
- printf(" USB DR: %4d MHz\n",gd->usbdr_clk/1000000);
+ printf(" Core: %-4s MHz\n", strmhz(buf, gd->core_clk));
+ printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
+#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+ printf(" QE: %-4s MHz\n", strmhz(buf, gd->qe_clk));
+ printf(" BRG: %-4s MHz\n", strmhz(buf, gd->brg_clk));
+#endif
+ printf(" Local Bus Controller:%-4s MHz\n", strmhz(buf, gd->lbiu_clk));
+ printf(" Local Bus: %-4s MHz\n", strmhz(buf, gd->lclk_clk));
+ printf(" DDR: %-4s MHz\n", strmhz(buf, gd->mem_clk));
+#if defined(CONFIG_MPC8360)
+ printf(" DDR Secondary: %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
+#endif
+ printf(" SEC: %-4s MHz\n", strmhz(buf, gd->enc_clk));
+ printf(" I2C1: %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
+#if !defined(CONFIG_MPC832X)
+ printf(" I2C2: %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
+#endif
+#if defined(CONFIG_MPC8315)
+ printf(" TDM: %-4s MHz\n", strmhz(buf, gd->tdm_clk));
+#endif
+#if defined(CONFIG_MPC837X)
+ printf(" SDHC: %-4s MHz\n", strmhz(buf, gd->sdhc_clk));
+#endif
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
+ printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
+ printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
+ printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
+#endif
+#if defined(CONFIG_MPC834X)
+ printf(" USB MPH: %-4s MHz\n", strmhz(buf, gd->usbmph_clk));
+#endif
+#if defined(CONFIG_MPC837X)
+ printf(" PCIEXP1: %-4s MHz\n", strmhz(buf, gd->pciexp1_clk));
+ printf(" PCIEXP2: %-4s MHz\n", strmhz(buf, gd->pciexp2_clk));
+#endif
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ printf(" SATA: %-4s MHz\n", strmhz(buf, gd->sata_clk));
#endif
return 0;
}
+
+U_BOOT_CMD(clocks, 1, 0, do_clocks,
+ "clocks - print clock configuration\n",
+ " clocks\n"
+);