#include <config.h>
#include <mpc5xx.h>
+#include <timestamp.h>
#include <version.h>
#define CONFIG_5xx 1 /* needed for Linux kernel header files */
.globl version_string
version_string:
.ascii U_BOOT_VERSION
- .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
.ascii CONFIG_IDENT_STRING, "\0"
. = EXC_OFF_SYS_RESET
.globl _start
_start:
mfspr r3, 638
- li r4, CFG_ISB /* Set ISB bit */
+ li r4, CONFIG_SYS_ISB /* Set ISB bit */
or r3, r3, r4
mtspr 638, r3
li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
mtspr COUNTA, r0
mtspr COUNTB, r0
+#if defined(CONFIG_PATI)
+ /* the external flash access on PATI fails if programming the PLL to 40MHz.
+ * Copy the PLL programming code to the internal RAM and execute it
+ *----------------------------------------------------------------------*/
+ lis r3, CONFIG_SYS_MONITOR_BASE@h
+ ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
+ addi r3, r3, pll_prog_code_start - _start + EXC_OFF_SYS_RESET
+
+ lis r4, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
+ mtlr r4
+ addis r5,0,0x0
+ ori r5,r5,((pll_prog_code_end - pll_prog_code_start) >>2)
+ mtctr r5
+ addi r3, r3, -4
+ addi r4, r4, -4
+0:
+ lwzu r0,4(r3)
+ stwu r0,4(r4)
+ bdnz 0b /* copy loop */
+ blrl
+#endif
+
/*
* Calculate absolute address in FLASH and jump there
*----------------------------------------------------------------------*/
- lis r3, CFG_MONITOR_BASE@h
- ori r3, r3, CFG_MONITOR_BASE@l
+ lis r3, CONFIG_SYS_MONITOR_BASE@h
+ ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
mtlr r3
blr
/* Initialize some SPRs that are hard to access from C */
/*----------------------------------------------------------------------*/
- lis r3, CFG_IMMR@h /* Pass IMMR as arg1 to C routine */
- lis r2, CFG_INIT_SP_ADDR@h
- ori r1, r2, CFG_INIT_SP_ADDR@l /* Set up the stack in internal SRAM */
+ lis r3, CONFIG_SYS_IMMR@h /* Pass IMMR as arg1 to C routine */
+ lis r2, CONFIG_SYS_INIT_SP_ADDR@h
+ ori r1, r2, CONFIG_SYS_INIT_SP_ADDR@l /* Set up the stack in internal SRAM */
/* Note: R0 is still 0 here */
stwu r0, -4(r1) /* Clear final stack frame so that */
stwu r0, -4(r1) /* stack backtraces terminate cleanly */
/* Set up debug mode entry */
- lis r2, CFG_DER@h
- ori r2, r2, CFG_DER@l
+ lis r2, CONFIG_SYS_DER@h
+ ori r2, r2, CONFIG_SYS_DER@l
mtspr DER, r2
/* Let the C-code set up the rest */
/* Alignment exception. */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
/* Program check exception */
. = 0x700
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
mr r10, r5 /* Save copy of monitor destination Address in SRAM */
mr r3, r5 /* Destination Address */
- lis r4, CFG_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CFG_MONITOR_BASE@l
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
lwz r5, GOT(__init_end)
sub r5, r5, r4
/*
* Fix GOT pointer:
*
- * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
*
* Offset:
*/
isync
blr
+
+
+#if defined(CONFIG_PATI)
+/* Program the PLL */
+pll_prog_code_start:
+ lis r4, (CONFIG_SYS_IMMR + 0x002fc384)@h
+ ori r4, r4, (CONFIG_SYS_IMMR + 0x002fc384)@l
+ lis r3, (0x55ccaa33)@h
+ ori r3, r3, (0x55ccaa33)@l
+ stw r3, 0(r4)
+ lis r4, (CONFIG_SYS_IMMR + 0x002fc284)@h
+ ori r4, r4, (CONFIG_SYS_IMMR + 0x002fc284)@l
+ lis r3, CONFIG_SYS_PLPRCR@h
+ ori r3, r3, CONFIG_SYS_PLPRCR@l
+ stw r3, 0(r4)
+ addis r3,0,0x0
+ ori r3,r3,0xA000
+ mtctr r3
+..spinlp:
+ bdnz ..spinlp /* spin loop */
+ blr
+pll_prog_code_end:
+ nop
+ blr
+#endif