#include <config.h>
#include <mpc5xx.h>
+#include <timestamp.h>
#include <version.h>
#define CONFIG_5xx 1 /* needed for Linux kernel header files */
.globl version_string
version_string:
.ascii U_BOOT_VERSION
- .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
.ascii CONFIG_IDENT_STRING, "\0"
. = EXC_OFF_SYS_RESET
.globl _start
_start:
mfspr r3, 638
- li r4, CFG_ISB /* Set ISB bit */
+ li r4, CONFIG_SYS_ISB /* Set ISB bit */
or r3, r3, r4
mtspr 638, r3
li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
mtspr COUNTA, r0
mtspr COUNTB, r0
+#if defined(CONFIG_PATI)
+ /* the external flash access on PATI fails if programming the PLL to 40MHz.
+ * Copy the PLL programming code to the internal RAM and execute it
+ *----------------------------------------------------------------------*/
+ lis r3, CONFIG_SYS_MONITOR_BASE@h
+ ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
+ addi r3, r3, pll_prog_code_start - _start + EXC_OFF_SYS_RESET
+
+ lis r4, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
+ mtlr r4
+ addis r5,0,0x0
+ ori r5,r5,((pll_prog_code_end - pll_prog_code_start) >>2)
+ mtctr r5
+ addi r3, r3, -4
+ addi r4, r4, -4
+0:
+ lwzu r0,4(r3)
+ stwu r0,4(r4)
+ bdnz 0b /* copy loop */
+ blrl
+#endif
+
/*
* Calculate absolute address in FLASH and jump there
*----------------------------------------------------------------------*/
- lis r3, CFG_MONITOR_BASE@h
- ori r3, r3, CFG_MONITOR_BASE@l
+ lis r3, CONFIG_SYS_MONITOR_BASE@h
+ ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
mtlr r3
blr
/* Initialize some SPRs that are hard to access from C */
/*----------------------------------------------------------------------*/
- lis r3, CFG_IMMR@h /* Pass IMMR as arg1 to C routine */
- lis r2, CFG_INIT_SP_ADDR@h
- ori r1, r2, CFG_INIT_SP_ADDR@l /* Set up the stack in internal SRAM */
+ lis r3, CONFIG_SYS_IMMR@h /* Pass IMMR as arg1 to C routine */
+ lis r2, CONFIG_SYS_INIT_SP_ADDR@h
+ ori r1, r2, CONFIG_SYS_INIT_SP_ADDR@l /* Set up the stack in internal SRAM */
/* Note: R0 is still 0 here */
stwu r0, -4(r1) /* Clear final stack frame so that */
stwu r0, -4(r1) /* stack backtraces terminate cleanly */
/* Set up debug mode entry */
- lis r2, CFG_DER@h
- ori r2, r2, CFG_DER@l
+ lis r2, CONFIG_SYS_DER@h
+ ori r2, r2, CONFIG_SYS_DER@l
mtspr DER, r2
/* Let the C-code set up the rest */
/* Alignment exception. */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
/* Program check exception */
. = 0x700
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
-
- . = 0xc00
-/*
- * r0 - SYSCALL number
- * r3-... arguments
- */
-SystemCall:
- addis r11,r0,0 /* get functions table addr */
- ori r11,r11,0 /* Note: this code is patched in trap_init */
- addis r12,r0,0 /* get number of functions */
- ori r12,r12,0
-
- cmplw 0, r0, r12
- bge 1f
-
- rlwinm r0,r0,2,0,31 /* fn_addr = fn_tbl[r0] */
- add r11,r11,r0
- lwz r11,0(r11)
-
- li r20,0xd00-4 /* Get stack pointer */
- lwz r12,0(r20)
- subi r12,r12,12 /* Adjust stack pointer */
- li r0,0xc00+_end_back-SystemCall
- cmplw 0, r0, r12 /* Check stack overflow */
- bgt 1f
- stw r12,0(r20)
-
- mflr r0
- stw r0,0(r12)
- mfspr r0,SRR0
- stw r0,4(r12)
- mfspr r0,SRR1
- stw r0,8(r12)
-
- li r12,0xc00+_back-SystemCall
- mtlr r12
- mtspr SRR0,r11
-
-1: SYNC
- rfi
-
-_back:
-
- mfmsr r11 /* Disable interrupts */
- li r12,0
- ori r12,r12,MSR_EE
- andc r11,r11,r12
- SYNC /* Some chip revs need this... */
- mtmsr r11
- SYNC
-
- li r12,0xd00-4 /* restore regs */
- lwz r12,0(r12)
-
- lwz r11,0(r12)
- mtlr r11
- lwz r11,4(r12)
- mtspr SRR0,r11
- lwz r11,8(r12)
- mtspr SRR1,r11
-
- addi r12,r12,12 /* Adjust stack pointer */
- li r20,0xd00-4
- stw r12,0(r20)
-
- SYNC
- rfi
-_end_back:
-
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
STD_EXCEPTION(0xd00, SingleStep, UnknownException)
STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
mr r10, r5 /* Save copy of monitor destination Address in SRAM */
mr r3, r5 /* Destination Address */
- lis r4, CFG_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CFG_MONITOR_BASE@l
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
lwz r5, GOT(__init_end)
sub r5, r5, r4
/*
* Fix GOT pointer:
*
- * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
*
* Offset:
*/
isync
blr
+
+
+#if defined(CONFIG_PATI)
+/* Program the PLL */
+pll_prog_code_start:
+ lis r4, (CONFIG_SYS_IMMR + 0x002fc384)@h
+ ori r4, r4, (CONFIG_SYS_IMMR + 0x002fc384)@l
+ lis r3, (0x55ccaa33)@h
+ ori r3, r3, (0x55ccaa33)@l
+ stw r3, 0(r4)
+ lis r4, (CONFIG_SYS_IMMR + 0x002fc284)@h
+ ori r4, r4, (CONFIG_SYS_IMMR + 0x002fc284)@l
+ lis r3, CONFIG_SYS_PLPRCR@h
+ ori r3, r3, CONFIG_SYS_PLPRCR@l
+ stw r3, 0(r4)
+ addis r3,0,0x0
+ ori r3,r3,0xA000
+ mtctr r3
+..spinlp:
+ bdnz ..spinlp /* spin loop */
+ blr
+pll_prog_code_end:
+ nop
+ blr
+#endif