DECLARE_GLOBAL_DATA_PTR;
-/*
- * get_clocks() fills in gd->cpu_clock and gd->bus_clk
- */
+/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */
int get_clocks (void)
{
+#if defined(CONFIG_M5208)
+ volatile pll_t *pll = (pll_t *) MMAP_PLL;
+
+ pll->odr = CONFIG_SYS_PLL_ODR;
+ pll->fdr = CONFIG_SYS_PLL_FDR;
+#endif
+
#if defined(CONFIG_M5249) || defined(CONFIG_M5253)
volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR);
unsigned long pllcr;
-#ifndef CFG_PLL_BYPASS
+#ifndef CONFIG_SYS_PLL_BYPASS
#ifdef CONFIG_M5249
/* Setup the PLL to run at the specified speed */
-#ifdef CFG_FAST_CLK
+#ifdef CONFIG_SYS_FAST_CLK
pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */
#else
pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */
#endif /* CONFIG_M5249 */
#ifdef CONFIG_M5253
- pllcr = CFG_PLLCR;
+ pllcr = CONFIG_SYS_PLLCR;
#endif /* CONFIG_M5253 */
cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */
pllcr ^= 0x00000001; /* Set pll bypass to 1 */
mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */
udelay(0x20); /* Wait for a lock ... */
-#endif /* #ifndef CFG_PLL_BYPASS */
+#endif /* #ifndef CONFIG_SYS_PLL_BYPASS */
#endif /* CONFIG_M5249 || CONFIG_M5253 */
#if defined(CONFIG_M5275)
volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL);
- /* Setup PLL */
- pll->syncr = 0x01080000;
- while (!(pll->synsr & FMPLL_SYNSR_LOCK));
- pll->syncr = 0x01000000;
- while (!(pll->synsr & FMPLL_SYNSR_LOCK));
+ /* Setup PLL */
+ pll->syncr = 0x01080000;
+ while (!(pll->synsr & FMPLL_SYNSR_LOCK))
+ ;
+ pll->syncr = 0x01000000;
+ while (!(pll->synsr & FMPLL_SYNSR_LOCK))
+ ;
#endif
- gd->cpu_clk = CFG_CLK;
-#if defined(CONFIG_M5249) || defined(CONFIG_M5253) || defined(CONFIG_M5275)
+ gd->cpu_clk = CONFIG_SYS_CLK;
+#if defined(CONFIG_M5208) || defined(CONFIG_M5249) || defined(CONFIG_M5253) || \
+ defined(CONFIG_M5271) || defined(CONFIG_M5275)
gd->bus_clk = gd->cpu_clk / 2;
#else
gd->bus_clk = gd->cpu_clk;
#endif
+
+#ifdef CONFIG_FSL_I2C
+ gd->i2c1_clk = gd->bus_clk;
+#ifdef CONFIG_SYS_I2C2_OFFSET
+ gd->i2c2_clk = gd->bus_clk;
+#endif
+#endif
+
return (0);
}