#include <common.h>
#include <command.h>
+#include <watchdog.h>
#include <asm/mcfuart.h>
+#ifdef CONFIG_M5271
+#include <asm/m5271.h>
+#endif
+
#ifdef CONFIG_M5272
#include <asm/m5272.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_M5249
+#if defined(CONFIG_M5249) || defined(CONFIG_M5271)
#define DoubleClock(a) ((double)(CFG_CLK/2) / 32.0 / (double)(a))
#else
#define DoubleClock(a) ((double)(CFG_CLK) / 32.0 / (double)(a))
void rs_serial_setbaudrate(int port,int baudrate)
{
-#if defined(CONFIG_M5272) || defined(CONFIG_M5249)
+#if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5271)
volatile unsigned char *uartp;
- double clock, fraction;
+#ifndef CONFIG_M5271
+ double fraction;
+#endif
+ double clock;
if (port == 0)
uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
clock = DoubleClock(baudrate); /* Set baud above */
- fraction = ((clock - (int)clock) * 16.0) + 0.5;
-
uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */
uartp[MCFUART_UBG2] = ((int)clock & 0xff); /* set lsb baud */
+
+#ifndef CONFIG_M5271
+ fraction = ((clock - (int)clock) * 16.0) + 0.5;
uartp[MCFUART_UFPD] = ((int)fraction & 0xf); /* set baud fraction adjust */
#endif
+#endif
};
void rs_serial_init(int port,int baudrate)
else
uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
+
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR; /* reset Error pointer */
uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
- rs_serial_setbaudrate(port,baudrate);
+ /* Mask UART interrupts */
+ uartp[MCFUART_UIMR] = 0;
+ /* Set clock Select Register: Tx/Rx clock is timer */
uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
+
+ rs_serial_setbaudrate(port,baudrate);
+
+ /* Enable Tx/Rx */
uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
return;
}
int serial_getc(void) {
- while(!rs_is_char());
+ while(!rs_is_char())
+ WATCHDOG_RESET();
+
return rs_get_char();
}