* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
#include <common.h>
#include <command.h>
-#include <asm/arch/sys_proto.h>
-
-#ifdef CONFIG_USE_IRQ
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
+#include <asm/system.h>
+#include <asm/cache.h>
#ifndef CONFIG_L2_OFF
-void l2cache_disable(void);
+#include <asm/arch/sys_proto.h>
#endif
static void cache_flush(void);
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1(void)
-{
- unsigned long value;
-
- __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 0\
- @ read control reg\n":"=r"(value)
- ::"memory");
- return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1(unsigned long value)
-{
- __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 0\
- @ write it back\n"::"r"(value)
- : "memory");
-
- read_p15_c1();
-}
-
-static void cp_delay(void)
-{
- /* Many OMAP regs need at least 2 nops */
- asm("nop");
- asm("nop");
-}
-
-/* See also ARM Ref. Man. */
-#define C1_MMU (1<<0) /* mmu off/on */
-#define C1_ALIGN (1<<1) /* alignment faults off/on */
-#define C1_DC (1<<2) /* dcache off/on */
-#define C1_WB (1<<3) /* merging write buffer on/off */
-#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
-#define C1_SYS_PROT (1<<8) /* system protection */
-#define C1_ROM_PROT (1<<9) /* ROM protection */
-#define C1_IC (1<<12) /* icache off/on */
-#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
-#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */
-
-int cpu_init(void)
-{
- /*
- * setup up stacks if necessary
- */
-#ifdef CONFIG_USE_IRQ
- IRQ_STACK_START =
- _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
- FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
-#endif
- return 0;
-}
-
int cleanup_before_linux(void)
{
unsigned int i;
#ifndef CONFIG_L2_OFF
/* turn off L2 cache */
- l2cache_disable();
+ l2_cache_disable();
/* invalidate L2 cache also */
- v7_flush_dcache_all(get_device_type());
+ invalidate_dcache(get_device_type());
#endif
i = 0;
/* mem barrier to sync up things */
asm("mcr p15, 0, %0, c7, c10, 4": :"r"(i));
#ifndef CONFIG_L2_OFF
- l2cache_enable();
+ l2_cache_enable();
#endif
return 0;
}
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- disable_interrupts();
- reset_cpu(0);
-
- /* NOTREACHED */
- return 0;
-}
-
-void icache_enable(void)
-{
- ulong reg;
-
- reg = read_p15_c1(); /* get control reg. */
- cp_delay();
- write_p15_c1(reg | C1_IC);
-}
-
-void icache_disable(void)
-{
- ulong reg;
-
- reg = read_p15_c1();
- cp_delay();
- write_p15_c1(reg & ~C1_IC);
-}
-
-void dcache_disable (void)
-{
- ulong reg;
-
- reg = read_p15_c1 ();
- cp_delay ();
- write_p15_c1 (reg & ~C1_DC);
-}
-
-void l2cache_enable()
-{
- unsigned long i;
- volatile unsigned int j;
-
- /* ES2 onwards we can disable/enable L2 ourselves */
- if (get_cpu_rev() == CPU_3430_ES2) {
- __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i));
- __asm__ __volatile__("orr %0, %0, #0x2":"=r"(i));
- __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i));
- } else {
- /* Save r0, r12 and restore them after usage */
- __asm__ __volatile__("mov %0, r12":"=r"(j));
- __asm__ __volatile__("mov %0, r0":"=r"(i));
-
- /*
- * GP Device ROM code API usage here
- * r12 = AUXCR Write function and r0 value
- */
- __asm__ __volatile__("mov r12, #0x3");
- __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1");
- __asm__ __volatile__("orr r0, r0, #0x2");
- /* SMI instruction to call ROM Code API */
- __asm__ __volatile__(".word 0xE1600070");
- __asm__ __volatile__("mov r0, %0":"=r"(i));
- __asm__ __volatile__("mov r12, %0":"=r"(j));
- }
-
-}
-
-void l2cache_disable()
-{
- unsigned long i;
- volatile unsigned int j;
-
- /* ES2 onwards we can disable/enable L2 ourselves */
- if (get_cpu_rev() == CPU_3430_ES2) {
- __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i));
- __asm__ __volatile__("bic %0, %0, #0x2":"=r"(i));
- __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i));
- } else {
- /* Save r0, r12 and restore them after usage */
- __asm__ __volatile__("mov %0, r12":"=r"(j));
- __asm__ __volatile__("mov %0, r0":"=r"(i));
-
- /*
- * GP Device ROM code API usage here
- * r12 = AUXCR Write function and r0 value
- */
- __asm__ __volatile__("mov r12, #0x3");
- __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1");
- __asm__ __volatile__("bic r0, r0, #0x2");
- /* SMI instruction to call ROM Code API */
- __asm__ __volatile__(".word 0xE1600070");
- __asm__ __volatile__("mov r0, %0":"=r"(i));
- __asm__ __volatile__("mov r12, %0":"=r"(j));
- }
-}
-
-int icache_status(void)
-{
- return (read_p15_c1() & C1_IC) != 0;
-}
-
static void cache_flush(void)
{
asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (0));