*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
#include <common.h>
#include <clps7111.h>
-
#include <asm/proc-armv/ptrace.h>
+#include <asm/hardware.h>
-extern void reset_cpu(ulong addr);
-
+#ifndef CONFIG_NETARM
/* we always count down the max. */
#define TIMER_LOAD_VAL 0xffff
-
/* macro to read the 16 bit timer */
#define READ_TIMER (IO_TC1D & 0xffff)
+#ifdef CONFIG_LPC2292
+#undef READ_TIMER
+#define READ_TIMER (0xFFFFFFFF - GET32(T0TC))
+#endif
+
+#else
+#define IRQEN (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE))
+#define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL))
+#define TM2STAT (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_STATUS))
+#define TIMER_LOAD_VAL NETARM_GEN_TSTAT_CTC_MASK
+#define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK)
+#endif
+
+#ifdef CONFIG_S3C4510B
+/* require interrupts for the S3C4510B */
+# ifndef CONFIG_USE_IRQ
+# error CONFIG_USE_IRQ _must_ be defined when using CONFIG_S3C4510B
+# else
+static struct _irq_handler IRQ_HANDLER[N_IRQS];
+# endif
+#endif /* CONFIG_S3C4510B */
+
#ifdef CONFIG_USE_IRQ
-/* enable IRQ/FIQ interrupts */
-void enable_interrupts (void)
+void do_irq (struct pt_regs *pt_regs)
{
- unsigned long temp;
- __asm__ __volatile__("mrs %0, cpsr\n"
- "bic %0, %0, #0x80\n"
- "msr cpsr_c, %0"
- : "=r" (temp)
- :
- : "memory");
-}
+#if defined(CONFIG_S3C4510B)
+ unsigned int pending;
+ while ( (pending = GET_REG( REG_INTOFFSET)) != 0x54) { /* sentinal value for no pending interrutps */
+ IRQ_HANDLER[pending>>2].m_func( IRQ_HANDLER[pending>>2].m_data);
-/*
- * disable IRQ/FIQ interrupts
- * returns true if interrupts had been enabled before we disabled them
- */
-int disable_interrupts (void)
-{
- unsigned long old,temp;
- __asm__ __volatile__("mrs %0, cpsr\n"
- "orr %1, %0, #0x80\n"
- "msr cpsr_c, %1"
- : "=r" (old), "=r" (temp)
- :
- : "memory");
- return (old & 0x80) == 0;
-}
+ /* clear pending interrupt */
+ PUT_REG( REG_INTPEND, (1<<(pending>>2)));
+ }
+#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
+ /* No do_irq() for IntegratorAP/CM720T as yet */
+#elif defined(CONFIG_LPC2292)
+
+ void (*pfnct)(void);
+
+ pfnct = (void (*)(void))VICVectAddr;
+
+ (*pfnct)();
#else
-void enable_interrupts (void)
-{
- return;
-}
-int disable_interrupts (void)
-{
- return 0;
+#error do_irq() not defined for this CPU type
+#endif
}
#endif
-
-void bad_mode (void)
-{
- panic ("Resetting CPU ...\n");
- reset_cpu (0);
+#ifdef CONFIG_S3C4510B
+static void default_isr( void *data) {
+ printf ("default_isr(): called for IRQ %d\n", (int)data);
}
-void show_regs (struct pt_regs *regs)
-{
- unsigned long flags;
- const char *processor_modes[] =
- { "USER_26", "FIQ_26", "IRQ_26", "SVC_26", "UK4_26", "UK5_26",
-"UK6_26", "UK7_26",
- "UK8_26", "UK9_26", "UK10_26", "UK11_26", "UK12_26", "UK13_26",
- "UK14_26", "UK15_26",
- "USER_32", "FIQ_32", "IRQ_32", "SVC_32", "UK4_32", "UK5_32",
- "UK6_32", "ABT_32",
- "UK8_32", "UK9_32", "UK10_32", "UND_32", "UK12_32", "UK13_32",
- "UK14_32", "SYS_32"
- };
-
- flags = condition_codes (regs);
-
- printf ("pc : [<%08lx>] lr : [<%08lx>]\n"
- "sp : %08lx ip : %08lx fp : %08lx\n",
- instruction_pointer (regs),
- regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
- printf ("r10: %08lx r9 : %08lx r8 : %08lx\n",
- regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
- printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
- regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
- printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
- regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
- printf ("Flags: %c%c%c%c",
- flags & CC_N_BIT ? 'N' : 'n',
- flags & CC_Z_BIT ? 'Z' : 'z',
- flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
- printf (" IRQs %s FIQs %s Mode %s%s\n",
- interrupts_enabled (regs) ? "on" : "off",
- fast_interrupts_enabled (regs) ? "on" : "off",
- processor_modes[processor_mode (regs)],
- thumb_mode (regs) ? " (T)" : "");
-}
+static void timer_isr( void *data) {
+ unsigned int *pTime = (unsigned int *)data;
-void do_undefined_instruction (struct pt_regs *pt_regs)
-{
- printf ("undefined instruction\n");
- show_regs (pt_regs);
- bad_mode ();
-}
+ (*pTime)++;
+ if ( !(*pTime % (CONFIG_SYS_HZ/4))) {
+ /* toggle LED 0 */
+ PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1);
+ }
-void do_software_interrupt (struct pt_regs *pt_regs)
-{
- printf ("software interrupt\n");
- show_regs (pt_regs);
- bad_mode ();
}
+#endif
-void do_prefetch_abort (struct pt_regs *pt_regs)
-{
- printf ("prefetch abort\n");
- show_regs (pt_regs);
- bad_mode ();
-}
+#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
+ /* Use IntegratorAP routines in board/integratorap.c */
+#else
-void do_data_abort (struct pt_regs *pt_regs)
-{
- printf ("data abort\n");
- show_regs (pt_regs);
- bad_mode ();
-}
+static ulong timestamp;
+static ulong lastdec;
-void do_not_used (struct pt_regs *pt_regs)
+#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C4510B)
+int arch_interrupt_init (void)
{
- printf ("not used\n");
- show_regs (pt_regs);
- bad_mode ();
-}
+ int i;
-void do_fiq (struct pt_regs *pt_regs)
-{
- printf ("fast interrupt request\n");
- show_regs (pt_regs);
- bad_mode ();
+ /* install default interrupt handlers */
+ for ( i = 0; i < N_IRQS; i++) {
+ IRQ_HANDLER[i].m_data = (void *)i;
+ IRQ_HANDLER[i].m_func = default_isr;
+ }
+
+ /* configure interrupts for IRQ mode */
+ PUT_REG( REG_INTMODE, 0x0);
+ /* clear any pending interrupts */
+ PUT_REG( REG_INTPEND, 0x1FFFFF);
+
+ lastdec = 0;
+
+ /* install interrupt handler for timer */
+ IRQ_HANDLER[INT_TIMER0].m_data = (void *)×tamp;
+ IRQ_HANDLER[INT_TIMER0].m_func = timer_isr;
+
+ return 0;
}
+#endif
-void do_irq (struct pt_regs *pt_regs)
+int timer_init (void)
{
- printf ("interrupt request\n");
- show_regs (pt_regs);
- bad_mode ();
-}
+#if defined(CONFIG_NETARM)
+ /* disable all interrupts */
+ IRQEN = 0;
-static ulong timestamp;
-static ulong lastdec;
+ /* operate timer 2 in non-prescale mode */
+ TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CONFIG_SYS_HZ) |
+ NETARM_GEN_TCTL_ENABLE |
+ NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL));
-int interrupt_init (void)
-{
+ /* set timer 2 counter */
+ lastdec = TIMER_LOAD_VAL;
+#elif defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
/* disable all interrupts */
IO_INTMR1 = 0;
/* set timer 1 counter */
lastdec = IO_TC1D = TIMER_LOAD_VAL;
+#elif defined(CONFIG_S3C4510B)
+ /* configure free running timer 0 */
+ PUT_REG( REG_TMOD, 0x0);
+ /* Stop timer 0 */
+ CLR_REG( REG_TMOD, TM0_RUN);
+
+ /* Configure for interval mode */
+ CLR_REG( REG_TMOD, TM1_TOGGLE);
+
+ /*
+ * Load Timer data register with count down value.
+ * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ
+ */
+ PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ));
+
+ /*
+ * Enable global interrupt
+ * Enable timer0 interrupt
+ */
+ CLR_REG( REG_INTMASK, ((1<<INT_GLOBAL) | (1<<INT_TIMER0)));
+
+ /* Start timer */
+ SET_REG( REG_TMOD, TM0_RUN);
+#elif defined(CONFIG_LPC2292)
+ PUT32(T0IR, 0); /* disable all timer0 interrupts */
+ PUT32(T0TCR, 0); /* disable timer0 */
+ PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ);
+ PUT32(T0MCR, 0);
+ PUT32(T0TC, 0);
+ PUT32(T0TCR, 1); /* enable timer0 */
+
+#else
+#error No timer_init() defined for this CPU type
+#endif
timestamp = 0;
return (0);
}
+#endif /* ! IntegratorAP */
+
/*
* timer without interrupts
*/
+
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO) || defined(CONFIG_LPC2292)
+
void reset_timer (void)
{
reset_timer_masked ();
ulong tmo;
tmo = usec / 1000;
- tmo *= CFG_HZ;
+ tmo *= CONFIG_SYS_HZ;
tmo /= 1000;
tmo += get_timer (0);
while (get_timer_masked () < tmo)
+#ifdef CONFIG_LPC2292
+ /* GJ - not sure whether this is really needed or a misunderstanding */
+ __asm__ __volatile__(" nop");
+#else
/*NOP*/;
+#endif
}
void reset_timer_masked (void)
void udelay_masked (unsigned long usec)
{
ulong tmo;
+ ulong endtime;
+ signed long diff;
- tmo = usec / 1000;
- tmo *= CFG_HZ;
- tmo /= 1000;
+ if (usec >= 1000) {
+ tmo = usec / 1000;
+ tmo *= CONFIG_SYS_HZ;
+ tmo /= 1000;
+ } else {
+ tmo = usec * CONFIG_SYS_HZ;
+ tmo /= (1000*1000);
+ }
- reset_timer_masked ();
+ endtime = get_timer_masked () + tmo;
- while (get_timer_masked () < tmo)
+ do {
+ ulong now = get_timer_masked ();
+ diff = endtime - now;
+ } while (diff >= 0);
+}
+
+#elif defined(CONFIG_S3C4510B)
+
+ulong get_timer (ulong base)
+{
+ return timestamp - base;
+}
+
+void udelay (unsigned long usec)
+{
+ u32 ticks;
+
+ ticks = (usec * CONFIG_SYS_HZ) / 1000000;
+
+ ticks += get_timer (0);
+
+ while (get_timer (0) < ticks)
/*NOP*/;
+
}
+
+#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
+ /* No timer routines for IntegratorAP/CM720T as yet */
+#else
+#error Timer routines not defined for this CPU type
+#endif