#endif /* CONFIG_S3C4510B */
#ifdef CONFIG_USE_IRQ
-/* enable IRQ/FIQ interrupts */
-void enable_interrupts (void)
-{
- unsigned long temp;
- __asm__ __volatile__("mrs %0, cpsr\n"
- "bic %0, %0, #0x80\n"
- "msr cpsr_c, %0"
- : "=r" (temp)
- :
- : "memory");
-}
-
-
-/*
- * disable IRQ/FIQ interrupts
- * returns true if interrupts had been enabled before we disabled them
- */
-int disable_interrupts (void)
-{
- unsigned long old,temp;
- __asm__ __volatile__("mrs %0, cpsr\n"
- "orr %1, %0, #0x80\n"
- "msr cpsr_c, %1"
- : "=r" (old), "=r" (temp)
- :
- : "memory");
- return (old & 0x80) == 0;
-}
-#else /* CONFIG_USE_IRQ */
-void enable_interrupts (void)
-{
- return;
-}
-int disable_interrupts (void)
-{
- return 0;
-}
-#endif
-
-void bad_mode (void)
-{
- panic ("Resetting CPU ...\n");
- reset_cpu (0);
-}
-
-void show_regs (struct pt_regs *regs)
-{
- unsigned long flags;
- const char *processor_modes[] =
- { "USER_26", "FIQ_26", "IRQ_26", "SVC_26", "UK4_26", "UK5_26",
-"UK6_26", "UK7_26",
- "UK8_26", "UK9_26", "UK10_26", "UK11_26", "UK12_26", "UK13_26",
- "UK14_26", "UK15_26",
- "USER_32", "FIQ_32", "IRQ_32", "SVC_32", "UK4_32", "UK5_32",
- "UK6_32", "ABT_32",
- "UK8_32", "UK9_32", "UK10_32", "UND_32", "UK12_32", "UK13_32",
- "UK14_32", "SYS_32"
- };
-
- flags = condition_codes (regs);
-
- printf ("pc : [<%08lx>] lr : [<%08lx>]\n"
- "sp : %08lx ip : %08lx fp : %08lx\n",
- instruction_pointer (regs),
- regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
- printf ("r10: %08lx r9 : %08lx r8 : %08lx\n",
- regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
- printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
- regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
- printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
- regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
- printf ("Flags: %c%c%c%c",
- flags & CC_N_BIT ? 'N' : 'n',
- flags & CC_Z_BIT ? 'Z' : 'z',
- flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
- printf (" IRQs %s FIQs %s Mode %s%s\n",
- interrupts_enabled (regs) ? "on" : "off",
- fast_interrupts_enabled (regs) ? "on" : "off",
- processor_modes[processor_mode (regs)],
- thumb_mode (regs) ? " (T)" : "");
-}
-
-void do_undefined_instruction (struct pt_regs *pt_regs)
-{
- printf ("undefined instruction\n");
- show_regs (pt_regs);
- bad_mode ();
-}
-
-void do_software_interrupt (struct pt_regs *pt_regs)
-{
- printf ("software interrupt\n");
- show_regs (pt_regs);
- bad_mode ();
-}
-
-void do_prefetch_abort (struct pt_regs *pt_regs)
-{
- printf ("prefetch abort\n");
- show_regs (pt_regs);
- bad_mode ();
-}
-
-void do_data_abort (struct pt_regs *pt_regs)
-{
- printf ("data abort\n");
- show_regs (pt_regs);
- bad_mode ();
-}
-
-void do_not_used (struct pt_regs *pt_regs)
-{
- printf ("not used\n");
- show_regs (pt_regs);
- bad_mode ();
-}
-
-void do_fiq (struct pt_regs *pt_regs)
-{
- printf ("fast interrupt request\n");
- show_regs (pt_regs);
- bad_mode ();
-}
-
void do_irq (struct pt_regs *pt_regs)
{
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO)
- printf ("interrupt request\n");
- show_regs (pt_regs);
- bad_mode ();
-#elif defined(CONFIG_S3C4510B)
+#if defined(CONFIG_S3C4510B)
unsigned int pending;
while ( (pending = GET_REG( REG_INTOFFSET)) != 0x54) { /* sentinal value for no pending interrutps */
#error do_irq() not defined for this CPU type
#endif
}
-
+#endif
#ifdef CONFIG_S3C4510B
static void default_isr( void *data) {
unsigned int *pTime = (unsigned int *)data;
(*pTime)++;
- if ( !(*pTime % (CFG_HZ/4))) {
+ if ( !(*pTime % (CONFIG_SYS_HZ/4))) {
/* toggle LED 0 */
PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1);
}
static ulong timestamp;
static ulong lastdec;
-int interrupt_init (void)
+#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C4510B)
+int arch_interrupt_init (void)
{
+ int i;
+
+ /* install default interrupt handlers */
+ for ( i = 0; i < N_IRQS; i++) {
+ IRQ_HANDLER[i].m_data = (void *)i;
+ IRQ_HANDLER[i].m_func = default_isr;
+ }
+
+ /* configure interrupts for IRQ mode */
+ PUT_REG( REG_INTMODE, 0x0);
+ /* clear any pending interrupts */
+ PUT_REG( REG_INTPEND, 0x1FFFFF);
+
+ lastdec = 0;
+
+ /* install interrupt handler for timer */
+ IRQ_HANDLER[INT_TIMER0].m_data = (void *)×tamp;
+ IRQ_HANDLER[INT_TIMER0].m_func = timer_isr;
+
+ return 0;
+}
+#endif
+int timer_init (void)
+{
#if defined(CONFIG_NETARM)
/* disable all interrupts */
IRQEN = 0;
/* operate timer 2 in non-prescale mode */
- TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CFG_HZ) |
+ TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CONFIG_SYS_HZ) |
NETARM_GEN_TCTL_ENABLE |
NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL));
/* set timer 1 counter */
lastdec = IO_TC1D = TIMER_LOAD_VAL;
#elif defined(CONFIG_S3C4510B)
- int i;
-
- /* install default interrupt handlers */
- for ( i = 0; i < N_IRQS; i++) {
- IRQ_HANDLER[i].m_data = (void *)i;
- IRQ_HANDLER[i].m_func = default_isr;
- }
-
- /* configure interrupts for IRQ mode */
- PUT_REG( REG_INTMODE, 0x0);
- /* clear any pending interrupts */
- PUT_REG( REG_INTPEND, 0x1FFFFF);
-
- lastdec = 0;
-
- /* install interrupt handler for timer */
- IRQ_HANDLER[INT_TIMER0].m_data = (void *)×tamp;
- IRQ_HANDLER[INT_TIMER0].m_func = timer_isr;
-
/* configure free running timer 0 */
PUT_REG( REG_TMOD, 0x0);
/* Stop timer 0 */
/*
* Load Timer data register with count down value.
- * count_down_val = CFG_SYS_CLK_FREQ/CFG_HZ
+ * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ
*/
- PUT_REG( REG_TDATA0, (CFG_SYS_CLK_FREQ / CFG_HZ));
+ PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ));
/*
* Enable global interrupt
#elif defined(CONFIG_LPC2292)
PUT32(T0IR, 0); /* disable all timer0 interrupts */
PUT32(T0TCR, 0); /* disable timer0 */
- PUT32(T0PR, CFG_SYS_CLK_FREQ / CFG_HZ);
- PUT32(T0MCR, 0);
+ PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ);
+ PUT32(T0MCR, 0);
PUT32(T0TC, 0);
PUT32(T0TCR, 1); /* enable timer0 */
#else
-#error No interrupt_init() defined for this CPU type
+#error No timer_init() defined for this CPU type
#endif
timestamp = 0;
ulong tmo;
tmo = usec / 1000;
- tmo *= CFG_HZ;
+ tmo *= CONFIG_SYS_HZ;
tmo /= 1000;
tmo += get_timer (0);
if (usec >= 1000) {
tmo = usec / 1000;
- tmo *= CFG_HZ;
+ tmo *= CONFIG_SYS_HZ;
tmo /= 1000;
} else {
- tmo = usec * CFG_HZ;
+ tmo = usec * CONFIG_SYS_HZ;
tmo /= (1000*1000);
}
{
u32 ticks;
- ticks = (usec * CFG_HZ) / 1000000;
+ ticks = (usec * CONFIG_SYS_HZ) / 1000000;
ticks += get_timer (0);