* Copyright (c) 1991, 1993
* The Regents of the University of California. All rights reserved.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * Licensed under GPLv2 or later, see file LICENSE in this source tree.
*
* Original copyright notice is retained at the end of this file.
*/
-#include "busybox.h"
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
+/* BB_AUDIT SUSv3 compliant -- unless configured as fancy echo. */
+/* http://www.opengroup.org/onlinepubs/007904975/utilities/echo.html */
+
+/* Mar 16, 2003 Manuel Novoa III (mjn3@codepoet.org)
+ *
+ * Because of behavioral differences, implemented configurable SUSv3
+ * or 'fancy' gnu-ish behaviors. Also, reduced size and fixed bugs.
+ * 1) In handling '\c' escape, the previous version only suppressed the
+ * trailing newline. SUSv3 specifies _no_ output after '\c'.
+ * 2) SUSv3 specifies that octal escapes are of the form \0{#{#{#}}}.
+ * The previous version did not allow 4-digit octals.
+ */
+
+#include "libbb.h"
+
+/* This is a NOFORK applet. Be very careful! */
-extern int
-echo_main(int argc, char** argv)
+/* NB: can be used by shell even if not enabled as applet */
+
+int echo_main(int argc UNUSED_PARAM, char **argv)
{
- int nflag = 0;
- int eflag = 0;
+ const char *arg;
+#if !ENABLE_FEATURE_FANCY_ECHO
+ enum {
+ eflag = '\\',
+ nflag = 1, /* 1 -- print '\n' */
+ };
+
+ /* We must check that stdout is not closed.
+ * The reason for this is highly non-obvious.
+ * echo_main is used from shell. Shell must correctly handle "echo foo"
+ * if stdout is closed. With stdio, output gets shoveled into
+ * stdout buffer, and even fflush cannot clear it out. It seems that
+ * even if libc receives EBADF on write attempts, it feels determined
+ * to output data no matter what. So it will try later,
+ * and possibly will clobber future output. Not good. */
+// TODO: check fcntl() & O_ACCMODE == O_WRONLY or O_RDWR?
+ if (fcntl(1, F_GETFL) == -1)
+ return 1; /* match coreutils 6.10 (sans error msg to stderr) */
+ //if (dup2(1, 1) != 1) - old way
+ // return 1;
+
+ arg = *++argv;
+ if (!arg)
+ goto newline_ret;
+#else
+ const char *p;
+ char nflag = 1;
+ char eflag = 0;
- /* Skip argv[0]. */
- argc--;
- argv++;
+ /* We must check that stdout is not closed. */
+ if (fcntl(1, F_GETFL) == -1)
+ return 1;
- while (argc > 0 && *argv[0] == '-')
- {
- register char *temp;
- register int index;
+ while (1) {
+ arg = *++argv;
+ if (!arg)
+ goto newline_ret;
+ if (*arg != '-')
+ break;
- /*
- * If it appears that we are handling options, then make sure
+ /* If it appears that we are handling options, then make sure
* that all of the options specified are actually valid.
* Otherwise, the string should just be echoed.
*/
- temp = argv[0] + 1;
-
- for (index = 0; temp[index]; index++)
- {
- if (strrchr("neE", temp[index]) == 0)
- goto just_echo;
- }
-
- if (!*temp)
+ p = arg + 1;
+ if (!*p) /* A single '-', so echo it. */
goto just_echo;
- /*
- * All of the options in temp are valid options to echo.
- * Handle them.
- */
- while (*temp)
- {
- if (*temp == 'n')
- nflag = 1;
- else if (*temp == 'e')
- eflag = 1;
- else if (*temp == 'E')
- eflag = 0;
- else
+ do {
+ if (!strrchr("neE", *p))
goto just_echo;
+ } while (*++p);
- temp++;
- }
- argc--;
- argv++;
+ /* All of the options in this arg are valid, so handle them. */
+ p = arg + 1;
+ do {
+ if (*p == 'n')
+ nflag = 0;
+ if (*p == 'e')
+ eflag = '\\';
+ } while (*++p);
}
+ just_echo:
+#endif
+ while (1) {
+ /* arg is already == *argv and isn't NULL */
+ int c;
-just_echo:
- while (argc > 0) {
- char *arg = argv[0];
- register int c;
-
- while ((c = *arg++)) {
-
- /* Check for escape sequence. */
- if (c == '\\' && eflag && *arg) {
+ if (!eflag) {
+ /* optimization for very common case */
+ fputs(arg, stdout);
+ } else while ((c = *arg++)) {
+ if (c == eflag) { /* Check for escape seq. */
if (*arg == 'c') {
- /* '\c' means cancel newline. */
- nflag = 1;
- arg++;
- continue;
- } else {
- c = process_escape_sequence(&arg);
+ /* '\c' means cancel newline and
+ * ignore all subsequent chars. */
+ goto ret;
+ }
+#if !ENABLE_FEATURE_FANCY_ECHO
+ /* SUSv3 specifies that octal escapes must begin with '0'. */
+ if ( ((int)(unsigned char)(*arg) - '0') >= 8) /* '8' or bigger */
+#endif
+ {
+ /* Since SUSv3 mandates a first digit of 0, 4-digit octals
+ * of the form \0### are accepted. */
+ if (*arg == '0') {
+ /* NB: don't turn "...\0" into "...\" */
+ if (arg[1] && ((unsigned char)(arg[1]) - '0') < 8) {
+ arg++;
+ }
+ }
+ /* bb_process_escape_sequence handles NUL correctly
+ * ("...\" case). */
+ c = bb_process_escape_sequence(&arg);
}
}
-
- putchar(c);
+ bb_putchar(c);
}
- argc--;
- argv++;
- if (argc > 0)
- putchar(' ');
+
+ arg = *++argv;
+ if (!arg)
+ break;
+ bb_putchar(' ');
}
- if (!nflag)
- putchar('\n');
- fflush(stdout);
- return EXIT_SUCCESS;
+ newline_ret:
+ if (nflag) {
+ bb_putchar('\n');
+ }
+ ret:
+ return fflush_all();
}
/*-
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
- * 3. <BSD Advertising Clause omitted per the July 22, 1999 licensing change
- * ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change>
+ * 3. <BSD Advertising Clause omitted per the July 22, 1999 licensing change
+ * ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change>
*
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
*
* @(#)echo.c 8.1 (Berkeley) 5/31/93
*/
+
+#ifdef VERSION_WITH_WRITEV
+/* We can't use stdio.
+ * The reason for this is highly non-obvious.
+ * echo_main is used from shell. Shell must correctly handle "echo foo"
+ * if stdout is closed. With stdio, output gets shoveled into
+ * stdout buffer, and even fflush cannot clear it out. It seems that
+ * even if libc receives EBADF on write attempts, it feels determined
+ * to output data no matter what. So it will try later,
+ * and possibly will clobber future output. Not good.
+ *
+ * Using writev instead, with 'direct' conversion of argv vector.
+ */
+
+int echo_main(int argc, char **argv)
+{
+ struct iovec io[argc];
+ struct iovec *cur_io = io;
+ char *arg;
+ char *p;
+#if !ENABLE_FEATURE_FANCY_ECHO
+ enum {
+ eflag = '\\',
+ nflag = 1, /* 1 -- print '\n' */
+ };
+ arg = *++argv;
+ if (!arg)
+ goto newline_ret;
+#else
+ char nflag = 1;
+ char eflag = 0;
+
+ while (1) {
+ arg = *++argv;
+ if (!arg)
+ goto newline_ret;
+ if (*arg != '-')
+ break;
+
+ /* If it appears that we are handling options, then make sure
+ * that all of the options specified are actually valid.
+ * Otherwise, the string should just be echoed.
+ */
+ p = arg + 1;
+ if (!*p) /* A single '-', so echo it. */
+ goto just_echo;
+
+ do {
+ if (!strrchr("neE", *p))
+ goto just_echo;
+ } while (*++p);
+
+ /* All of the options in this arg are valid, so handle them. */
+ p = arg + 1;
+ do {
+ if (*p == 'n')
+ nflag = 0;
+ if (*p == 'e')
+ eflag = '\\';
+ } while (*++p);
+ }
+ just_echo:
+#endif
+
+ while (1) {
+ /* arg is already == *argv and isn't NULL */
+ int c;
+
+ cur_io->iov_base = p = arg;
+
+ if (!eflag) {
+ /* optimization for very common case */
+ p += strlen(arg);
+ } else while ((c = *arg++)) {
+ if (c == eflag) { /* Check for escape seq. */
+ if (*arg == 'c') {
+ /* '\c' means cancel newline and
+ * ignore all subsequent chars. */
+ cur_io->iov_len = p - (char*)cur_io->iov_base;
+ cur_io++;
+ goto ret;
+ }
+#if !ENABLE_FEATURE_FANCY_ECHO
+ /* SUSv3 specifies that octal escapes must begin with '0'. */
+ if ( (((unsigned char)*arg) - '1') >= 7)
+#endif
+ {
+ /* Since SUSv3 mandates a first digit of 0, 4-digit octals
+ * of the form \0### are accepted. */
+ if (*arg == '0' && ((unsigned char)(arg[1]) - '0') < 8) {
+ arg++;
+ }
+ /* bb_process_escape_sequence can handle nul correctly */
+ c = bb_process_escape_sequence( (void*) &arg);
+ }
+ }
+ *p++ = c;
+ }
+
+ arg = *++argv;
+ if (arg)
+ *p++ = ' ';
+ cur_io->iov_len = p - (char*)cur_io->iov_base;
+ cur_io++;
+ if (!arg)
+ break;
+ }
+
+ newline_ret:
+ if (nflag) {
+ cur_io->iov_base = (char*)"\n";
+ cur_io->iov_len = 1;
+ cur_io++;
+ }
+ ret:
+ /* TODO: implement and use full_writev? */
+ return writev(1, io, (cur_io - io)) >= 0;
+}
+#endif