cat is used to concatenate files and print them to the standard
output. Enable this option if you wish to enable the 'cat' utility.
+config CONFIG_CATV
+ bool "catv"
+ default n
+ help
+ Display nonprinting characters as escape sequences (like some
+ implementations' cat -v option).
+
config CONFIG_CHGRP
bool "chgrp"
default n
chroot is used to change the root directory and run a command.
The default command is `/bin/sh'.
+config CONFIG_CKSUM
+ bool "cksum"
+ default n
+ help
+ cksum is used to calculate the CRC32 checksum of a file.
+
config CONFIG_CMP
bool "cmp"
default n
current time in the given format.
config CONFIG_FEATURE_DATE_ISOFMT
- bool " Enable ISO date format output (-I)"
+ bool "Enable ISO date format output (-I)"
default y
depends on CONFIG_DATE
help
by default) using specific input and output blocksizes,
while optionally performing conversions on it.
+config CONFIG_FEATURE_DD_SIGNAL_HANDLING
+ bool "Enable DD signal handling for status reporting"
+ default y
+ depends on CONFIG_DD
+ help
+ sending a SIGUSR1 signal to a running `dd' process makes it
+ print to standard error the number of records read and written
+ so far, then to resume copying.
+
+ $ dd if=/dev/zero of=/dev/null& pid=$! $ kill -USR1 $pid; sleep 1; kill $pid
+ 10899206+0 records in 10899206+0 records out
+
+config CONFIG_FEATURE_DD_IBS_OBS
+ bool "Enable ibs, obs and conv options"
+ default n
+ depends on CONFIG_DD
+ help
+ Enables support for writing a certain number of bytes in and out,
+ at a time, and performing conversions on the data stream.
+
config CONFIG_DF
bool "df"
default n
df reports the amount of disk space used and available
on filesystems.
+config CONFIG_DIFF
+ bool "diff"
+ default n
+ help
+ diff compares two files or directories and outputs the
+ differences between them in a form that can be given to
+ the patch command.
+
+config CONFIG_FEATURE_DIFF_BINARY
+ bool "Enable checks for binary files"
+ default y
+ depends on CONFIG_DIFF
+ help
+ This option enables support for checking for binary files
+ before a comparison is carried out.
+
+config CONFIG_FEATURE_DIFF_DIR
+ bool "Enable directory support"
+ default y
+ depends on CONFIG_DIFF
+ help
+ This option enables support for directory and subdirectory
+ comparison.
+
+config CONFIG_FEATURE_DIFF_MINIMAL
+ bool "Enable -d option to find smaller sets of changes"
+ default n
+ depends on CONFIG_DIFF
+ help
+ Enabling this option allows the use of -d to make diff
+ try hard to find the smallest possible set of changes.
+
config CONFIG_DIRNAME
bool "dirname"
default n
bool
default y
depends on CONFIG_DOS2UNIX
+ help
+ unix2dos is used to convert a text file from UNIX format to
+ DOS format, and vice versa.
config CONFIG_DU
bool "du (default blocksize of 512 bytes)"
du is used to report the amount of disk space used
for specified files.
-config CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K
- bool " Use a default blocksize of 1024 bytes (1K)"
+config CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
+ bool "Use a default blocksize of 1024 bytes (1K)"
default y
depends on CONFIG_DU
help
# this entry also appears in shell/Config.in, next to the echo builtin
config CONFIG_FEATURE_FANCY_ECHO
- bool " Enable echo options (-n and -e)"
+ bool "Enable echo options (-n and -e)"
default y
depends on CONFIG_ECHO
help
a command; without options it displays the current
environment.
+config CONFIG_FEATURE_ENV_LONG_OPTIONS
+ bool "Enable long options"
+ default n
+ depends on CONFIG_ENV && CONFIG_GETOPT_LONG
+ help
+ Support long options for the env applet.
+
config CONFIG_EXPR
bool "expr"
default n
to standard output.
config CONFIG_EXPR_MATH_SUPPORT_64
- bool " Extend Posix numbers support to 64 bit"
+ bool "Extend Posix numbers support to 64 bit"
default n
depends on CONFIG_EXPR
help
from files.
config CONFIG_FEATURE_FANCY_HEAD
- bool " Enable head options (-c, -q, and -v)"
+ bool "Enable head options (-c, -q, and -v)"
default n
depends on CONFIG_HEAD
help
help
Copy files and set attributes.
+config CONFIG_FEATURE_INSTALL_LONG_OPTIONS
+ bool "Enable long options"
+ default n
+ depends on CONFIG_INSTALL && CONFIG_GETOPT_LONG
+ help
+ Support long options for the install applet.
+
config CONFIG_LENGTH
bool "length"
default n
ls is used to list the contents of directories.
config CONFIG_FEATURE_LS_FILETYPES
- bool " Enable filetyping options (-p and -F)"
+ bool "Enable filetyping options (-p and -F)"
default y
depends on CONFIG_LS
help
Enable the ls options (-p and -F).
config CONFIG_FEATURE_LS_FOLLOWLINKS
- bool " Enable symlinks dereferencing (-L)"
+ bool "Enable symlinks dereferencing (-L)"
default y
depends on CONFIG_LS
help
Enable the ls option (-L).
config CONFIG_FEATURE_LS_RECURSIVE
- bool " Enable recursion (-R)"
+ bool "Enable recursion (-R)"
default y
depends on CONFIG_LS
help
Enable the ls option (-R).
config CONFIG_FEATURE_LS_SORTFILES
- bool " Sort the file names"
+ bool "Sort the file names"
default y
depends on CONFIG_LS
help
Allow ls to sort file names alphabetically.
config CONFIG_FEATURE_LS_TIMESTAMPS
- bool " Show file timestamps"
+ bool "Show file timestamps"
default y
depends on CONFIG_LS
help
Allow ls to display timestamps for files.
config CONFIG_FEATURE_LS_USERNAME
- bool " Show username/groupnames"
+ bool "Show username/groupnames"
default y
depends on CONFIG_LS
help
Allow ls to display username/groupname for files.
config CONFIG_FEATURE_LS_COLOR
- bool " Allow use of color to identify file types"
+ bool "Allow use of color to identify file types"
default y
- depends on CONFIG_LS
+ depends on CONFIG_LS && CONFIG_GETOPT_LONG
help
This enables the --color option to ls.
config CONFIG_FEATURE_LS_COLOR_IS_DEFAULT
- bool " Produce colored ls output by default"
+ bool "Produce colored ls output by default"
default n
depends on CONFIG_FEATURE_LS_COLOR
help
help
md5sum is used to print or check MD5 checksums.
-config CONFIG_MD5SUM_SIZE_VS_SPEED
- int " Trade Bytes for Speed"
- default 2
- range 0 3
- depends on CONFIG_MD5SUM
- help
- Trade binary size versus speed for the md5sum algorithm.
- Approximate values running uClibc and hashing
- linux-2.4.4.tar.bz2 were:
- user times (sec) text size (386)
- 0 (fastest) 1.1 6144
- 1 1.4 5392
- 2 3.0 5088
- 3 (smallest) 5.1 4912
-
config CONFIG_MKDIR
bool "mkdir"
default n
help
mkdir is used to create directories with the specified names.
+config CONFIG_FEATURE_MKDIR_LONG_OPTIONS
+ bool "Enable long options"
+ default n
+ depends on CONFIG_MKDIR && CONFIG_GETOPT_LONG
+ help
+ Support long options for the mkdir applet.
+
config CONFIG_MKFIFO
bool "mkfifo"
default n
help
mv is used to move or rename files or directories.
+config CONFIG_FEATURE_MV_LONG_OPTIONS
+ bool "Enable long options"
+ default n
+ depends on CONFIG_MV && CONFIG_GETOPT_LONG
+ help
+ Support long options for the mv applet.
+
config CONFIG_NICE
bool "nice"
default n
sleep is used to pause for a specified number of seconds,
config CONFIG_FEATURE_FANCY_SLEEP
- bool " Enable multiple integer args and optional time suffixes"
+ bool "Enable multiple integer args and optional time suffixes"
default n
depends on CONFIG_SLEEP
help
sort is used to sort lines of text in specified files.
config CONFIG_FEATURE_SORT_BIG
- bool " full SuSv3 compliant sort (Support -ktcsbdfiozgM)"
+ bool "full SuSv3 compliant sort (Support -ktcsbdfiozgM)"
default y
depends on CONFIG_SORT
help
display file or filesystem status.
config CONFIG_FEATURE_STAT_FORMAT
- bool " Enable custom formats (-c)"
+ bool "Enable custom formats (-c)"
default n
depends on CONFIG_STAT
help
from files.
config CONFIG_FEATURE_FANCY_TAIL
- bool " Enable extra tail options (-q, -s, and -v)"
+ bool "Enable extra tail options (-q, -s, and -v)"
default y
depends on CONFIG_TAIL
help
to standard output and files.
config CONFIG_FEATURE_TEE_USE_BLOCK_IO
- bool " Enable block i/o (larger/faster) instead of byte i/o."
+ bool "Enable block i/o (larger/faster) instead of byte i/o."
default n
depends on CONFIG_TEE
help
and bash) have test builtin.
config CONFIG_FEATURE_TEST_64
- bool " Extend test to 64 bit"
+ bool "Extend test to 64 bit"
default n
depends on CONFIG_TEST
help
input, writing to standard output.
config CONFIG_FEATURE_TR_CLASSES
- bool " Enable character classes (such as [:upper:])"
+ bool "Enable character classes (such as [:upper:])"
default n
depends on CONFIG_TR
help
tr [:upper:] [:lower:] to convert input into lowercase.
config CONFIG_FEATURE_TR_EQUIV
- bool " Enable equivalence classes"
+ bool "Enable equivalence classes"
default n
depends on CONFIG_TR
help
depends on CONFIG_CP || CONFIG_MV
config CONFIG_FEATURE_PRESERVE_HARDLINKS
- bool " Preserve hard links"
+ bool "Preserve hard links"
default n
depends on CONFIG_CP || CONFIG_MV
help
depends on CONFIG_LS || CONFIG_MORE || CONFIG_TELNET
config CONFIG_FEATURE_AUTOWIDTH
- bool " Calculate terminal & column widths"
+ bool "Calculate terminal & column widths"
default y
depends on CONFIG_LS || CONFIG_MORE || CONFIG_TELNET
help
depends on CONFIG_DF || CONFIG_DU || CONFIG_LS
config CONFIG_FEATURE_HUMAN_READABLE
- bool " Support for human readable output (example 13k, 23M, 235G)"
+ bool "Support for human readable output (example 13k, 23M, 235G)"
default n
depends on CONFIG_DF || CONFIG_DU || CONFIG_LS
help
depends on CONFIG_MD5SUM || CONFIG_SHA1SUM
config CONFIG_FEATURE_MD5_SHA1_SUM_CHECK
- bool " Enable -c, -s and -w options"
+ bool "Enable -c, -s and -w options"
default n
depends on CONFIG_MD5SUM || CONFIG_SHA1SUM
help