arm: k3: Use driver_name to get ti_sci handle

[oweals/u-boot.git] / configs / zynq_zybo_defconfig

diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig
index 9e44e82549f7a26ce04b78ad0592d0b64e29e770..71d1638d451a69f36243d745ad04d89414f359dd 100644 (file)
--- a/configs/zynq_zybo_defconfig
+++ b/configs/zynq_zybo_defconfig
@@ -1,21 +1,24 @@
 CONFIG_ARM=y
+CONFIG_SPL_SYS_DCACHE_OFF=y
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xe0001000
 CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_DEBUG_UART=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_CUSTOM_LDSCRIPT=y
+CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_USE_PREBOOT=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_PROMPT="Zynq> "
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
 CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
@@ -40,11 +43,10 @@ CONFIG_DFU_RAM=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_GPIO=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_BAR=y
+CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHY_MARVELL=y
 CONFIG_PHY_REALTEK=y