arm: at91: Makefile: Compile lowlevel_init only when really necessary

[oweals/u-boot.git] / configs / xilinx_zynqmp_zc1232_revA_defconfig

diff --git a/configs/xilinx_zynqmp_zc1232_revA_defconfig b/configs/xilinx_zynqmp_zc1232_revA_defconfig
index d5c083836da50fb56a1d0c3e1d1020d26ac290e5..80a310fb1cee4a9eda8a48c9f0899ecf01e12c28 100644 (file)
--- a/configs/xilinx_zynqmp_zc1232_revA_defconfig
+++ b/configs/xilinx_zynqmp_zc1232_revA_defconfig
@@ -3,9 +3,10 @@ CONFIG_ARCH_ZYNQMP=y
 CONFIG_SYS_TEXT_BASE=0x8000000
 CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL=y
-# CONFIG_SPL_FAT_SUPPORT is not set
+CONFIG_DEBUG_UART_BASE=0xff000000
+CONFIG_DEBUG_UART_CLOCK=100000000
+# CONFIG_SPL_FS_FAT is not set
 # CONFIG_SPL_LIBDISK_SUPPORT is not set
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1232-revA"
 CONFIG_DEBUG_UART=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
@@ -22,29 +23,29 @@ CONFIG_CMD_CLK=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_FPGA_LOADBP=y
 CONFIG_CMD_FPGA_LOADP=y
+CONFIG_CMD_FPGA_LOAD_SECURE=y
+CONFIG_CMD_SF=y
 # CONFIG_CMD_NET is not set
 CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_EMBED=y
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1232-revA"
 CONFIG_SPL_DM=y
-# CONFIG_BLK is not set
 CONFIG_CLK_ZYNQMP=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQMPPL=y
 CONFIG_MISC=y
-CONFIG_DM_MMC=y
+# CONFIG_MMC is not set
 CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
+CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ZYNQ_SERIAL=y
+CONFIG_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y