dm: clk: Define clk_get_by_id() for clk operations

[oweals/u-boot.git] / configs / sama5d3xek_mmc_defconfig

diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig
index 4beedb6a19c7a3e062f95a2b20700eed862fc814..ea565ecd13dd2446f600f2345d27c1513edecba2 100644 (file)
--- a/configs/sama5d3xek_mmc_defconfig
+++ b/configs/sama5d3xek_mmc_defconfig
@@ -9,10 +9,14 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_ENV_SIZE=0x4000
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
-CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek"
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
@@ -23,6 +27,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwai
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x300000
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
@@ -42,12 +47,10 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek"
 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
 CONFIG_ENV_IS_IN_FAT=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_BOOTP_BOOTPATH=y
-CONFIG_BOOTP_GATEWAY=y
-CONFIG_BOOTP_HOSTNAME=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
@@ -61,8 +64,14 @@ CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_PROTECTION=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_DM_ETH=y
 CONFIG_MACB=y
@@ -71,11 +80,9 @@ CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ATMEL=y
-CONFIG_DEBUG_UART_BASE=0xffffee00
-CONFIG_DEBUG_UART_CLOCK=132000000
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
+CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y