x86: samus: Add a target to boot through TPL

[oweals/u-boot.git] / configs / puma-rk3399_defconfig

diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index a45a34be31c980e3553b1066082b85b5524e79a9..964464ac0fe0f35e0d5c4793a84f8c4945067ca6 100644 (file)
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -8,13 +8,13 @@ CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
 CONFIG_TARGET_PUMA_RK3399=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_DEBUG_UART_BASE=0xFF180000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_DEBUG_UART=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its"
@@ -22,6 +22,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff8c2000
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
@@ -32,6 +33,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -66,6 +68,8 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
@@ -74,11 +78,11 @@ CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
-CONFIG_PINCTRL_ROCKCHIP_RK3399=y
 CONFIG_DM_PMIC=y
 CONFIG_DM_PMIC_FAN53555=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_SPL_DM_REGULATOR=y
+CONFIG_REGULATOR_PWM=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_SPL_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
@@ -96,7 +100,6 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_STORAGE=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_ASIX88179=y